• 한국건설관리학회논문집
• /
• 제21권4호
• /
• pp.21-29
• /
• 2020

본 연구에서는 사례분석 및 전문가 조사를 통하여 공사이행보증제도 운영의 문제점을 적시하고 개선방안을 제시하였다. 국가계약법에서는 공사계약에 있어서 계약상대자가 계약상의 의무를 이행하지 못하는 경우 계약상대자를 대신하여 계약상의 의무를 이행할 것을 보증하되, 이를 보증한 기관이 의무를 이행하지 아니하는 경우에는 일정금액을 납부할 것을 보증하는 공사이행보증서 제출을 의무화하고 있다. 현행 정부계약제도는 공사이행보증의 보증사고 시 잔여공사의 규모, 기술적 난이도, 특수공정의 포함 여부 등을 고려하지 않고 보증이행업체에게 일률적으로 당초 입찰공고 공고에서의 입찰참가자격을 요구하고 있다. 그리고 공동도급에서 보증사고가 발생했을 때, 잔존구성원에게 엄격하게 전체 계약에 대한 계약이행요건을 요구하여 많은 문제가 발생하고 있다. 본 연구에서 제시한 개선방안은 다음과 같다. 먼저, 보증이행업체 선정에서 잔여공사의 현황을 고려하여 예외적으로 보증이행업체의 자격을 완화해야 한다. 둘째, 공동도급의 경우 잔존 구성원의 계약이행요건을 '해당 계약이행요건'에서 '잔여공사의 계약이행요건'으로 완화시켜야 한다. 셋째, 보증이행공사의 하자담보책임을 원사업자 또는 보증기관이 부담하도록 공사이행보증의 채무범위에 하자담보채무가 포함되도록 개선해야 한다.

• Architectural research
• /
• 제25권1호
• /
• pp.11-17
• /
• 2023

This study aims to derive key construction supervision work that can be digitalized among construction supervision work. The scope of the study includes domestic construction sites to which the Building Act of South Korea is applied. First, the construction supervision process was identified through extensive consultation of construction expert witnesses. Afterwards, the key construction supervision works for digitization were derived through survey results construction expert witnesses. Among the 24 supervision works throughout the pre-construction, construction, and post-construction stages, the proportion of supervision work manpower or cost, the type of data generated by supervision work and the urgency of introducing digital technology, and the impact on productivity and safety of supervision work were evaluated on a 5-point scale from "very low" to "very high" was investigated. The survey was conducted by t-test analysis, and as a result, it was possible to derive that the level of digitization was higher than average in "quality management," "safety management," and "collection and cooperation of maintenance instructions." It can be interpreted that digitization has been introduced on a pilot testing basis or has already been completed according to the needs of the site. On the other hand, it can be interpreted that the work that are obtained below the average score are considered to be realistically constrained at the construction site and that it is inevitable for the supervisor to proceed manually. Future studies include analyzing the quantitative impact of the key construction supervision work once digitalization is fully applied.

• 대한인간공학회지
• /
• 제29권3호
• /
• pp.321-329
• /
• 2010

Unlike production line works, construction work is non-repetitive in nature. In this study, a checklist was developed to characterize the ergonomic hazards of construction work. Eight existing checklists including OWAS, RULA, and REBA were integrated, and a new version was designed to include more postures of lower extremities. The analysis results obtained using the new checklist showed that manual materials handling (MMH) is the most common risk factor. About 62% of the MMH was done below the knee level or above the elbow level, and 22% was carried out with the trunk twisted more than $60^{\circ}$. The next risk factors were the works done with the knee bent or squatted, or with the shoulders abducted. It can be concluded that the new checklist is successful as a quick and easy tool for screening risk factors of construction works, although it is not capable of determining action levels. Further studies on validation of the checklist are expected.

• 한국건축시공학회지
• /
• 제6권2호
• /
• pp.81-89
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved qualify and reduction of construction period can be obtained from CWS method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.66-67
• /
• 2015

This study compared and analyzed the job importance that site managers perceived by dividing the study scope into customized and expansion remodeling projects and deriving the job descriptions from previous studies. As a result, a total of 7 construction stages and 53 job descriptions were derived. As job importance in customized remodeling projects, removal and demolition works were the most important, followed by preliminary survey, and repair and reinforcement works. In addition, as job importance in expansion remodeling projects, preliminary survey is the most important, followed by civil engineering work, and repair and reinforcement works. It is considered that the job importance of the remodeling projects derived in this study will contribute to improving their job efficiency in the future.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.70-75
• /
• 1999

The purpose of this study is to recycle the waste concrete which is generated in large quantities as crushed stone in construction works. This study deals with the comparative analysis on the construction works and engineering properties of recycled aggregate concrete through physical experiment. The experimental variables are the kinds of aggregates, some different aggregate composition, and W/C ratio(0.40, 0.45, 0.50). It is able to find from the experimental results that the recycled aggregate concrete is good as general concrete on the construction works and engineering propperties. In addition to, the reliable regression analysis equations between compressive strength and various experimental data for recycled aggregate concrete are presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.285-292
• /
• 2003

The soft structure can make large space more effectively, and its construction is easy and simple as well. However, it is not easy to realize this in the actual space. Therefore, two works are needed to be done for effective and accurate construction of soft structures. First, making a working scenario to complete the final objective form; second revising construction errors occurred in the middle of the actual works. These works are called constructional analysis. At this time, geometric nonlinearity should be considered to reflect the sensitivity by the initial stress of flexible structures, constructional analysis comes down to a nonlinear problem after all. This study approaches nonlinear constructional analysis with the numerical method for adjusting stress of cable-dome structures which are a soft structure system, and then verifies it.

• 한국건설관리학회논문집
• /
• 제15권2호
• /
• pp.3-11
• /
• 2014

최근 건설사업은 건축, 토목, 기계, 전기, 조경 등의 모든 분야를 포함하는 복합 건설사업으로 추진되고 있고 대형화, 고층화 되어감에 따라 반복공정이 증가하게 되면서 작업 연속성 확보를 통한 목표공기를 달성하는 TACT 공정관리기법이 대두되고 있다. TACT기법은 반복작업의 자원을 효율적으로 활용하기 위해 작업과 작업이 단절되지 않도록 일정한 작업흐름을 유지할 수 있지만 CPM기법에 의해 수립된 네트워크가 아니기 때문에 전진계산, 후진계산, Critical Path 관리, 여유시간을 알 수 없어 체계적인 공정관리라 할 수 없다. 본 연구에서는 공동주택의 마감공사 TACT 공정계획을 기존의 엑셀(Excel), PDM기법 기반의 공정관리소프트웨어인 Primavera(P6), 새로운 공정관리기법 BDM기법 기반의 공정관리소프트웨어인 Beeliner로 작성 및 운영하는 방법들을 비교분석함으로써 BDM기법에 의한 TACT 공정계획 수립 및 운영상 적용성을 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.187-188
• /
• 2015

The construction finishing work is emphasized according to high dependence on labor and long term that occupy approximately 40% in construction period, so that it is required for the alternatives such as automation technology. However, it is insufficient to develop the automation technology of construction finishing work compared to other works, for instance, frame work. Also it is not enough about this preliminary research which survey the improvement needs to select the development object. Therefore, this study aimed at derivation of detail works required improvement in ceiling finishing work by the questionnaire survey. These results may provide the basic information to develop the automation technology of construction finishing work.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.102-107
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics and prediction of piling noise in oil pressure method. On the basis of measurement value, we analysed about prediction possibility of piling noise in oil pressure method.