• The Korean Journal of Emergency Medical Services
• /
• v.26 no.3
• /
• pp.201-208
• /
• 2022

Purpose: The purpose of this study is to analyze the current status of disasters and initial first aid in the construction industry, and to suggest the deployment of emergency medical technicians and reinforcement of first aid training in the construction industry. Methods: Among industrial accidents in 2020, the accident characteristics and initial first aid that occurred at construction sites were analyzed, and the emergency dispatch of 119 paramedics was analyzed through the SPSS method. Results: The incidence of serious accidents was high at small and medium-sized construction sites with less than 50 workers, and the incidence of falls was high, and there were few first responders who could provide first aid in the beginning. Therefore, it is necessary to improve first aid response capabilities at small construction sites. Conclusion: In order to improve the ability to respond to first aid at construction sites, it is necessary to deploy first responders and strengthen first aid education.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.209-217
• /
• 2013

The execution of a construction project involves the engagement of many participants. Generally, the Authority uses CM to certify that the Work is built according to the contract documents. The CM work scope is expressed in the Construction Technology Management Act and its Regulation. The mandated and delegated CM services are limited to the construction period. If Contractor is required to repair a construction defect, the Contractor should bear the burden of the inspection service for the defect repair, because it is associated with him. Nevertheless, CM should submit a bond to provide the inspection and supervision service for the defect repair. These may result in conflict with each liability. Therefore, CM service in the law and regulation was investigated and analyzed in this study to classify the characteristics of CM contracts, and it was suggested that the CM liability for the inspection and supervision service for the defect repair should be reconsidered.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.4
• /
• pp.26-34
• /
• 2013

Customer satisfaction and customer relationship are crucial aspect in any enterprises including housing construction projects. In general, the housing developers are facing a number of new challenges in different countries including Libya. The construction industries/housing developers need to continuously improve their products and services to meet customers' satisfaction desires and to remain in the current competitive market. This paper focuses on analysing the satisfaction factors of customers including qualityaspects of products and services in the construction projects. A framework was developed to evaluate the dynamics relationship between customer satisfaction and quality products or services, aiming to help companies' managers and policy makers to understand the needs and points of view of their customers. Apragmatic analysis was conducted to explore and analyse the customer satisfaction factors in construction industry considering different aspect of customer groups in Libya. Results indicate that there is a high demand of improvements in the contractor's performance in terms of cost, time and quality of products. It was also found that Libyan construction companies have been forced to transform their policies after on Libyan war 2011 to focus on client and customer satisfactory policies, or say centric for the purpose of improving client requirements and turn the business into more advantageous for any company.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.162-167
• /
• 2009

With the introduction of the ubiquitous technology, the housing culture centers of construction companies have demonstrated future housing image and technology. However, ubiquitous home services are technology oriented items. The purpose of this study was to identify u- services which were realized in domestic future housing and to compare those with services the residents needed greatly refer to researches related to demand for u-service. For this study, field studies were conducted with 3 domestic future housings and precedent studies on demand for u-service were analyzed according to the standard of residents' demand. The results of the study showed that residents prefer u-services for security and control of indoor environment for housework and leisure life. As a result, u-services which residents needed mainly did not correspond with those that were displayed in future housing.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.161-166
• /
• 2007

Various thermostatic valves have been used widely in Korea for conservation of heating energy and enhancement of thermal comfort in residential buildings. But heating control performances of thermostatic valves extensively vary with the design and operational conditions of the heating system, climate condition and others. An experimental method was carried out in this study to analyze heating control characteristics by temperature sensing methods of thermostatic valves for various parameters, such as supply temperatures and flow rate of hot water, the position of room thermostats and outdoor air temperatures. As a result, the heat flow rate per day of S-Valve($34^{\circ}C$-Type) of water temperature sensing method was liked that of C-Valve of indoor air temperature sensing method with stage 3.3 of room thermostat in case supply temperature of hot water was $45^{\circ}C$, flow rate was 1.3 L/min and outdoor air temperature was $7.8^{\circ}C$.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.271-279
• /
• 2011

This paper draws performance results through comparing WMNs' methods when the WMNs are used in tunnel construction sites. There are many advantages of WMNs : lower cost, easy to network maintenance, robustness and reliability within RF-ranges. As a result, using the WMNs would be suitable to employ as a network infrastructure for the construction sites. This paper evaluates the performance of WMNs which we have installed in a tunnel construction. Through the performance results, we conclude the performance of data throughputs gets lower when we perform the network in tunnel environments. We make attempts WMNs' two major methods which are SISC(Single Interface with Single Channel) and MIMC(Multi Interface with Multi Channel) to figure out which method will be better for the construction sites. Through the experiments, the WMN based on the MIMC method was comparatively suitable in network performance aspect for the tunnel Sites.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.1
• /
• pp.31-43
• /
• 2005

The new HVAC system is developed to lower the conveyance energy and building height using IAV(Increasing Air Volume) technique. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy. size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 percentage.

• Journal of Information Technology Services
• /
• v.5 no.1
• /
• pp.35-46
• /
• 2006

In recent years, academic scholars and practitioners have given increasing attention to the importance of strategic performance measurement systems including both financial and non-financial performance metrics. The Balanced Scorecard (BSC) is known as integrated performance management framework that helps an enterprise to translate strategic objectives into relevant performance within an organization. While the current literatures and management articles offer BSC design and implementation. there are few reports of detailed validation of using the rationalized sets of CSF (Critical Success Factors) and KPI (Key Performance Indicators) for the Korean construction industry. This paper first propose the perceived sets of CSF/KPI using current literatures and validate with a major construction company's executives and senior managers in Korea. The paper then examines whether the perceived sets of CSF/KPI have co-relationships with the firm performances. The results of the research contribute in heightening of competitiveness of the Korean construction companies in strategic and performance management.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.170-176
• /
• 2009

The goal of U-Eco City testbed is im proving the technical com pletion of ubiquitous technology /services which have been developed in other core projects in U-Eco City, by implementing newly developed ubiquitous technology/services to testbed. When the newly developed ubiquitous technology/services are implemented in the testbed, we will monitor whether the developed ubiquitous technology/services can be applied in the real situation and if they have problems we will find out the solution to solve the problems. In addition to this we have goal to sale experience of construction of U-Eco city testbed to the local governments and foreign cities. To accomplish this goal, it is necessary to make the guideline for the construction of U-Eco City. Final goal of this research is develop guideline for the construction of U-Eco City. I developed the framework of U-Eco City construction guideline by i) analyzing problems when the local governments try to construct U-City, ii) finding out general idea of Eco City and investigate connection between Eco City and U-City, iii) analyzing main steps of constructing U-City, and iv) matching the all the issues and considerations into process of u-Eco city construction steps.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2005.12a
• /
• pp.349-358
• /
• 2005

Recently, developing U-City as an integrated set of ubiquitous spaces has been regarded as a promising field in realizing ubiquitous computing technology. However, well-organized requirement analyses of U-City to declare what kinds of ubiquitous space services are needed and which ubiquitous computing technology should be incorporated to come up with the needs are still insufficient. Hence, the aims of this Paper are to Propose a set of unique U-City construction philosophies and to analyze which services Should be offered in the ubiquitous Space services in U-Cities. A field survey to the citizens who are potential end users of the ubiquitous space services was conducted to analyze the success factors of U-City using CSF methodology. Focused group interview with professionals in the field of ubiquitous computing technology in Korea was then performed to identify the relationship of the ubiquitous space services and the critical success factors.