• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.441-468
• /
• 2003

This paper investigates the structural behavior of modular falsework system under sequential pattern loads. Based on the studies of 25 construction sites, the pattern load sequence modeling is defined as models R (rectangle), L and U. The study focuses on the system critical loads, regions of largest reaction forces, discrepancy between the pattern load and the uniform load, and the warning-system plan. The analysis results show that the critical loads of modular falsework systems with sequential pattern loads are very close to those with the uniform load used in design. The regions of largest reaction forces are smaller than those calculated by the uniform load. However, the regions of largest reaction forces of three models under sequential pattern loads can be considered as the crucial positions of warning-system based on the measured index of loading. The positions of the sensors for the warning-system for these three different models are not identical.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.482-489
• /
• 2009

Various model piles with different sections such as reinforced concrete, steel, steel-concrete composite without rebar and steel-concrete composite with rebar were made, and vertical load test was conducted using a large scaled UTM(Universal Test Machine) to evaluate Young's modulus and ultimate load of the model piles. Based on the tests, ultimate load of steel-concrete composite pile is 31% greater than the sum of it of reinforced concrete pile and it of steel pile. This is caused that ultimate load and Young's modulus of inner concrete increase due to confining effect by outer steel casing. Variation of ultimate load is also insignificant depending on the ratio of length to diameter(L/D), therefore bucking has not an effect on change of ultimate load in case of the L/D below 10.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.650-661
• /
• 2003

시공 중에는 시공 하중의 영향으로 인하여 슬래브에 재하되는 하중이 슬래브 자중의 두배 이상에 달하며, 또한 콘크리트 재령이 충분치 않으므로 구조 안전성의 문제와 장기 처짐, 균열 등 사용성의 문제를 일으킬 수 있다. 현행 설계 기준에서 제시하고 있는 플랫 플레이트에 대한 최소 두께의 규정은 이러한 시공 하중의 영향을 고려하지 않고 있다. 본 연구에서는 기존 연구를 토대로 슬래브의 기하하적 형상, 경계 조건, 콘크리트 강도, 시공 하중 등의 영향을 고려할 수 있는 플랫 플레이트의 처짐 계산 방법을 개발하였으며, 이 방법을 기초로 하여 플랫 플레이트에 대한 최소 두께식을 제안하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.73-75
• /
• 2011

Unlike other craft workers, construction craft workers perform their work under diverse working conditions, which means that their working pattern and postures continuously change. While construction craft workers are vulnerable to musculoskeletal disorders, due to the unique factors of their working conditions, their actual condition has not yet been accurately investigated. For this reason, this research aims to develop a method of measuring the musculoskeletal load of construction workers by reviewing various motion measuring methods to which state-of-the-art sensors are applied. This research is expected to serve as the basis for developing a system to measure the musculoskeletal load of construction workers.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.29-35
• /
• 2022

In this paper, we developed a workload index for monitoring the durability test using operation information of an excavator. First, the acceleration and cylinder pressure were selected as load factors by analyzing operation data. Through load correlation analysis according to each load factor, Root Mean Square (RMS) and Work Load Range (WLR) were respectively derived as a load feature representing mechanical load. In addition, the workload index was used to quantify load features. For applying the workload index to monitoring, a real-time monitoring system consisting of sensors and embedded controller was installed on the excavator and the system was integrated with a remote monitoring environment using a wireless network. Results of load monitoring and analysis verified that the developed workload index was effective from the viewpoint of the relative comparison of the workload.

• 한국재료학회지
• /
• 제34권2호
• /
• pp.72-78
• /
• 2024

The lightweight and high strength characteristics of aluminum alloy materials make them have promising prospects in the field of construction engineering. This paper primarily focuses on aluminum alloy materials. Aluminum alloy was combined with concrete, wood and carbon fiber reinforced plastic (CFRP) cloth to create a composite column. The axial compression test was then conducted to understand the mechanical properties of different composite structures. It was found that the pure aluminum tube exhibited poor performance in the axial compression test, with an ultimate load of only 302.56 kN. However, the performance of the various composite columns showed varying degrees of improvement. With the increase of the load, the displacement and strain of each specimen rapidly increased, and after reaching the ultimate load, both load and strain gradually decreased. In comparison, the aluminum alloy-concrete composite column performed better than the aluminum alloy-wood composite column, while the aluminum alloy-wood-CFRP cloth composite column demonstrated superior performance. These results highlight excellent performance potential for aluminum alloy-wood-CFRP composite columns in practical applications.

• 한국지반공학회논문집
• /
• 제39권12호
• /
• pp.103-114
• /
• 2023

흙막이 현장에서 계측은 굴착으로 인한 지보재와 지반의 안정성 확인을 위해 필수적으로 수행해야 하는 중요한 요소이다. 특히, 굴착지반에서 전달되는 버팀대의 하중 전달 추이를 확인하는 하중계는 정확도 유지가 필수적이다. 그러나, 건설 현장에서는 하중계의 정확도를 파악할 수 있는 검증 방법, 규정 등의 연구가 부족하여 제대로 된 성능검사 없이 설치됨에 따라 문제가 되고 있다. 본 연구에서는 국내 현장에 사용되는 하중계를 전수조사하여 성능검사를 실시하고 외국 제품과의 비교를 통해 불량 원인을 파악하였다. 하중계의 성능검증을 통해 성능검사 기준을 제시하였으므로 본 연구 결과는 신뢰성 높은 하중계를 선택하는 데 도움이 될 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.935-937
• /
• 1998

The stringing load was added to tower design that consider the active load in 765kV transmission line construction. The nominal auxiliary members of steell tubular tower arm were altered into stress members by means of three dimensional design analysis method. 765kV transmission line construction also use self-standing tower that does not install temporary wire which support the section tower placed between drum field and engine field when stringing process.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1188-1194
• /
• 2008

As computation technologies has developed, the analysis using load transfer is mainly performed. But most of the functions used in the above program has been developed in foreign countries. Also in our nation, lots of studies concerning load transfer are being researched. The investigation of suitability about the piles installed in our grounds, however, is required as functions acquired experientially, basing on the piles installed in foreign grounds. In this background, the load transfer curve required to use load transfer method on its design through the analysis of field tests inside our nation intends to be made, on which this research focuses.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.1-8
• /
• 2023

The purpose of this study was to investigate and compare the impact of engine load on the emission characteristics of excavator engines, with the aim of improving the method for calculating the emission inventory of construction machinery. The engine load in excavators is directly correlated with the operational workload, and variations in the load factor (LF) can significantly influence the emission inventory. Thus, on-board diagnostic (OBD) data from an excavator at a construction site were systematically collected to measure engine output and emissions. The results revealed discernible differences in emissions based on engine load, even when the average excavator engine performance remained constant. This highlights the significant influence of the type and characteristics of the work being carried out on emission characteristics. Making realistic adjustments to the LF used in emission calculation formulas emerges as a crucial strategy for environmental improvement. Moreover, the analysis of the effects of engine load on emissions from excavators provides valuable insights for enhancing environmental protection measures.