• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.3
• /
• pp.41-63
• /
• 2004

The area covered by product liability in broadest sense is so vast that an attempt to analyse all its impact on the aviation world risk. Every effort has been made to confine our review of subject a closely as possible to its influence on aircraft manufacturers, airlines and passengers, in spite of strong connections with other spheres of commercial. Product Liability in aviation is the liability of aircraft's manufacturer, processor or non-manufacturing seller for injury to the person or property of a buyer or third party caused by a product which has been sold. Here-in a product is aircraft, third party is passengers who suffered damage by defective design, defective construction, inadequate instructions for handling in aircraft. Whenever a product turns out to be defective after it has been sold, there are under Anglo-American law three remedies available against the aircraft's manufacturer (1) liability for negligence (2) breach of warranty (3) strict liability in tort. There are Under continental law Three remedies available against the aircraft's manufacturer (1) liability for defective warranty (2) liability for non-fulfillment of obligation (3) liability in tort. It is worth pointing out here an action for breach of warranty or for defective warranty, for non-fulfillment of obligation is available only to direct purchaser on the basis of his contract with the aircraft's manufacturer, which of course weakness its range and effectiveness. An action for tort offers the advantage of being available also to third parties who have acquired the defective product at a later stage. In tort, obligations are constituted not only by contract, but also by stature and common law. In conclusion, There in no difference in principle of law. In conclusion I would like to make few suggestions regarding the product liability for aircraft's manufacturer. Firstly, current general product liability code does not specify whether government offices(e.g. FAA) inspector conducted the inspection and auditory certificate can qualify as conclusive legal evidence. These need to be clarified. Secondly, because Korea is gaining potential of becoming aircraft's manufacturer through co-manufacturing and subcontracting-manufacturing with the US and independent production, there needs legislation that can harmonize the protection of both aircraft's manufacturers and their injured parties. Since Korea is in primary stage of aviation industry, considerate policy cannot be overlooked for its protection and promotion. Thirdly, because aircraft manufacturers are risking restitution like air-carriers whose scope of restitution have widened to strict and unlimited liability, there needs importation of mandatory liability insurance and national warranty into the product liability for aircraft's manufacturers. Fourthly, there needs domestic legislation of air transportation law that clearly regulates overall legal relationship in air transportation such as carrier & aircraft manufacturer's liability, and aviation insurance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.170-176
• /
• 2012

In the nuclear industry, wall thinning defect of straight pipe occur the enormous loss in life evaluation and safety evaluation. To use non-destructive technique, we measure deformation, vibration, defect evaluation. But, this techniques are a weak that is the measurement of the wide area is difficult and the time is caught long. In the secondary side of nuclear power plants mostly used steel pipe, artificiality wall thinning defect make in the side and different thickness make to the each other, wall thinning defect part of deformation measure by using shearography. In addition, optical measurement through deformation, vibration, defect evaluation evaluate pipe and thickness defects of pressure vessel is to evaluate quantitatively. By shearography interferometry to measure the pipe's internal wall thinning defect and the variation of pressure use the proposed technique, the quantitative defect is to evaluate the thickness of the surplus. The amount of deformation use thickness of surplus prediction of the actual thickness defect and approximately 7 percent error by ensure reliability. According to pressure the amount of deformation and the thickness of the surplus through DB construction, nuclear power plant pipe use wall thinning part soundness evaluation. In this study, pressure vessel of thickness defect measure proposed nuclear pipe of wall thinning defect prediction and integrity assessment technology development. As a basic research defected theory and experiment, pressure vessel of advanced stability and soundness and maintainability is expected to contribute foundation establishment.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.315-322
• /
• 2010

This study focused on mobile trend in diffusion of smart phone. Presently, it has been evolved from digital nomad to smart nomad. Smart nomad era is based on digital technology with mobility and being smart. Smart nomad that is made up high-end device and intellectual content has changed structure of industry and life style. Smart phone is a core key in smart nomad era. In 2010 smart phone has been distributed about 2.5 hundreds million which is 20% of whole mobile phone sales and the volume of smart phone sales will be getting bigger and bigger in near future. Although, there are various reasons for success of smart phone market, this research focused 4 reasons: first, development of mobile device, second, evolution of mobile content distribution, third, support of government system, fourth, success of Docomo i-mode and Apple i phone. Smart phone will grow up more rapidly. Smart phone eco-system will be more competitive in the world. In Korea, smart phone eco-system also will be very competitive. For success in the middle of this competitive environment, Korea should lead the competitive phase with development of ability of creation software and content, construction of various partnership and evolution of next generation technology and service.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.32-44
• /
• 1987

This study was carried out to analyze and furecast the domestic demand for plywood in Korea by regression models with time-series data for 16 years(1970-85). The results obtained were summarized as follows. 1. To analyze domestic demand for plywood, GNP, PWI and CWI were used as independant variables. The domestic demand equation was computed as follows: $^{in}DDP$=0.65186+1.29412 $^{in}GNP$-0.28385 $^{in}PWI$-1.05011 $^{in}CWI$ Where DDP : Domestic demand for plywood(1000 S/F) GNP: Gross national product (Billion won) PWI : Real wholesale price index of plywood CWI: Real wholesale price index of construction materials. 2. Among independant variables reflecting on the production activity of plywood industry, GNP was the most decisive in forecasting the domestic demand for plywood. 3. The significance can be recognized highly because the decision coefficient of the forecasting model which is obtained by using time series data is 0.9. 4. According to the estimated regression coefficients for GNP, PWI and CWI, GNP shows positive relation while PWI and CWI show negative relation. 5. An annual average increase rate of demand for plywood was 9.4 percent during expect period. Therefore, it was decreased slightly than that of 10.2 percent during sample period.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.19-25
• /
• 2005

Recycling of waste materials in the construction Industry is a useful method that can cope with an environment restriction of every country. In this study, synthetic lightweight aggregates are manufactured with recycled plastic and fly ash with 12 percent carbon. Nominal maximum-size aggregates of 9.5 mm were produced with fly ash contents of 0, 35, and $80\%$ by the total mass of the aggregate. An expanded clay lightweight aggregate and a normal-weight aggregate were used as comparison. Gradation, density, and absorption capacity are reported for the aggregates. Five batches of concrete were made with the different coarse aggregate types. Mechanical properties of the concrete were determined including density, compressive strength, elastic modulus, splitting tensile strength, fracture toughness, and fracture energy. Salt-scaling resistance, a concrete durability property, was also examined. Compressive and tensile strengths were lower for the synthetic aggregates; however, comparable fracture properties were obtained. Relatively low compressive modulus of elasticity was found for concretes with the synthetic lightweight aggregate, although high ductility was also obtained. As nv ash content of the synthetic lightweight aggregate increased, all properties of the concrete were improved. Excellent salt-scaling resistance was obtained with the synthetic lightweight aggregate containing 80 percent fly ash.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.139-146
• /
• 2015

WSN has been utilized in various directions from basic infrastructure of environment composition to business models including corporate inventory, production and distribution management. However, as energy organizations' private information, which should be protected safely, has been integrated with ICT such as WSN to be informatization, it is placed at potential risk of leaking out with ease. Accordingly, it is time to need secure sensor node deployment strategies for stable enterprise business. Establishment of fragmentary security enhancement strategies without considering energy organizations' security status has a great effect on energy organizations' business sustainability in the event of a security accident. However, most of the existing security level evaluation models for diagnosing energy organizations' security use technology-centered measurement methods, and there are very insufficient studies on managerial and environmental factors. Therefore, this study would like to diagnose energy organizations' security and to look into how to accordingly establish strategies for planning secure sensor node deployment strategies.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.127-138
• /
• 2017

The Purpose of this Study is to Examine the Effects of Organizational Commitment on Safety Behavior. This Study Built a Exploratory Model that there is Causal Relationship of Organizational Commitment to Employee's Performance that Safety Behavior. Additionally this Study Examine the Moderating Effect of Employee's Job Insecurity on the Effect of Employee Safety Behavior. For the Verification of this Study Model, the Moderating Effects Regression Analysis was Applied to the Surveys of 240 Members of Small and Medium -Sized Construction Industry Employee in Busan. As a Result of the Verification, the First of Organizational Commitment on Organizational Performance has Found that all Three Organizational Commitment of Affective Commitment, Continuance Commitment and Normative Commitment have Impacts Safety Behavior. Second the Study Verifies the Moderating Effect of Employee's Job Insecurity. the Moderating Effect of Employee's Safety Behavior Between the Independent Variable(organizational commitment) and the Outcome Variables has been Analyzed. As a Result, High level of Job Insecurity Employee has been shown to have a Moderating Effect Between the Independent Variable and Safety Behavior.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.517-526
• /
• 2013

Lifelong education promotion business to be the first to promote lifelong education promotion accountable to the governor of the city, the Lifelong Education Act Amendment (2007.12) emphasis on the research area 6 Lifelong Education and Lifelong Education Institute is established if analyzes what Gyeongsangnam-do lifetime policy implications for the promotion of education and implications are derived(through AHP). The results were as follows: occupational skill enhancement education (0.335) as the priority section. The development of life education policy (0.238) is the primary work process that must be initiated for the Gyeongnam life education promotion policy appropriate for the region's situation. This was followed by the development and distribution of life education program (0.148), construction of a connective system between life education organizations within the province (0.139) Raised the need to promote lifelong Education strategies, five core strategic industry linkages through regional industrial policy to keep pace with the flow of business for the Advancement of Education for the development and activation of Gyeongsangnam-do in a lifetime.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.447-465
• /
• 2004

This paper is to analyze citizens' consciousness on urban changes, especially focusing on changes in urban environment, spatial structure, and urban planning, of large cities in S. Korea, that is, Seoul, Daejeon, Daegu, and Kwangju in the 1990s. Some significant points can be described as follows. First. The most important factor influencing on the change of urban spatial structure was the expansion of residential area inner and outside of cities promoted by the traditional construction industry, and not development of high-tech industries and their complex or location of multi-national firms which can be emphasized as major factors of new urbanization process of global cities. Secondly, citizens seem to have experienced improvement and deterioration of urban environment simultaneously, emphasizing regulatory environmental policy on the one hand, and recognize the necessity of sustainable urban development within given environmental capacity and restoration of destructed and polluted environment of cities. Thirdly, the building boom of new apartment complex was a major driving force of changing urban spatial structure, but it could neither alleviate a residential gap between the poor and the rich areas nor a relief of traffic congestion. Finally, the urban policy in general was felt somewhat improved by citizens, but not in sectoral details.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.91-115
• /
• 1996

In the recent years, protected horticultural facilities have been modernized and glasshouses are also propagating in Korea, even most vegetables production are conducted in the traditional plastic houses covered with, for example, PVC film for just temperature keeping. It would limit the productivity and competitivity of the vegetable production industry without automatization and high quality year round production. A plant factory, aimed to produce vegetables in the limited areas, was initiated in Christensen farm, Denmark in 1957, and widely propagated in some developed countries. As it has the automatized system which enables to keep optimized environment conditions, it will be the best facility for high quality products as well as year round planned production. However, we have not even started the plant factory production. Since the plant factory is requiring lots of resources, besides plant cultivation technologies, such as environment control, automatic engineering and robotics, our approach to the development of plant factories should be minded on Practical Plant Factories considering our current farming practices and least capital needs rather than blindly employing the advanced technologies from developed countries. Thus, Korean plant factory development can be initiated with year round leaf vegetables production in NFT or DFT cultivation system instead of the moval bed system, in which aerial environment factors such as light, temperature, humidity and CO$_2$ concentration and root environment ones such as solution concentration, temperature, pH and water soluble oxygen shall be automatically controlled. And the seeding, seedling and transplanting operations shall be accomplished in the house entrance, and the harvesting and grading opreations shall be conducted in the house exit. For practical plant factories, environment control technologies including artificial light source, illumination and air conditioning, automatic management for nutrient solution and automatic production line of moval bed system, transplanting and harvest should be developed along with researches on the cost reduction of factory building construction.