• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.185-192
• /
• 2003

This study consolidation undrain Triaxial Compression Tests using constant confining pressure in clay that receive preconsolidation stress that is different and, void ratio, pore water pressure coefficient, shear strength compare with another thing theory and studied analyzing change relation of elastic modules. The summary of analysis is follows: If preconsolidation stress increases in same confining stress in relation of preconsolidation stress and deviator stress, deviator stress is proportional and increased. Can know that excess void pressure is proportional and decreases in size of preconsolidation stress in same confining stress state if preconsolidation stress increases preconsolidation stress and relation of excess void pressure. Also, over consolidated state can assume that this is thing by Dilatancy's effect though excess void pressure decreased remarkably. Preconsolidation stress and relation of stress path can know that shear strength degree increases preconsolidation stress increases, and specially, preconsolidation stress was appear in stress path form of overconsolidated state case of clay that receive at 300, 400, 500kPa in 100, 150kPa's deviator stress.

• Steel and Composite Structures
• /
• 제15권1호
• /
• pp.41-55
• /
• 2013

This paper presents a numerical study of axially loaded concrete-filled steel tubular columns with "T" shaped cross section (CFTTS) based on the ABAQUS standard solver. Two types of columns with "T" shaped cross section, the common concrete-filled steel tubular columns with "T" shaped cross section (CCFTTS) and the double concrete-filled steel tubular columns with "T" shaped cross section (DCFTTS), are discussed. The failure modes, confining effects and load-displacement curves are analyzed. The numerical results indicate that both have the similar failure mode that the steel tubes are only outward buckling on all columns' faces. It is found that DCFTTS columns have higher axial capacities than CCFTTS ones duo to the steel tube of DCFTTS columns can plays more significant confining effect on concrete. A parametric study, including influence of tube thickness, concrete strength and friction coefficient of tube-concrete interface on the axial capacities is also carried out. Simplified formulae were also proposed based on this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1140-1147
• /
• 2010

To find the soil plug of steel piles shaped by jet grouting, 4 blocks of cement milk with cube of 1.2m were made. 4 open-ended steel piles on the blocks were rested. The inner end part of 2 the piles was not reinforced. Cement milk 65%(SIG-1) and 100%(RJP-1) were filled into the block and height of 4.2 times of inner the pile diameter respectively. And the other the piles were welded 2 steel ring. The filling of the cement milk was an equal method as before(SIG-2 and RJP-2). Also the strain gauges were installed and the static pile load tests were done at the piles all. As a result, list in great order for effect of soil plug was (1)SIG-1, (2)SIG-2, (3)RJP-1, (4)RJP-2. This is because of strength and filling height of cement milk. And the higher the strength is, the greater the confining coefficient is.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.111-135
• /
• 2013

An experimental study has been carried out on square plain concrete (PC) and reinforced concrete (RC) columns strengthened with carbon fiber-reinforced polymer (CFRP) sheets. A total of 78 specimens were loaded to failure in axial compression and investigated in both axial and transverse directions. Slenderness of the columns, number of wrap layers and concrete strength were the test parameters. Compressive stress, axial and hoop strains were recorded to evaluate the stress-strain relationship, ultimate strength and ductility of the specimens. Results clearly demonstrate that composite wrapping can enhance the structural performance of square columns in terms of both maximum strength and ductility. On the basis of the effective lateral confining pressure of composite jacket and the effective FRP strain coefficient, new peak stress equations were proposed to predict the axial strength and corresponding strain of FRP-confined square concrete columns. This model incorporates the effect of the effective circumferential FRP failure strain and the effect of the effective lateral confining pressure. The results show that the predictions of the model agree well with the test data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.351-354
• /
• 2003

Triaxial behavior of concrete cylinders wrapped with FRP material has been investigated for the increase of concrete strength by lateral confinement. Using the model by Richart et al., a modified empirical equation was proposed to estimate the strength of concrete cylinders with FRP confinement based on the linear relationship between the concrete strength and lateral confining pressure. From the experimental stress-strain result of the cylinder specimens having similar confining pressure, less ductility was observed for higher strength concrete. But the compressive strength of the specimen was linearly increased by lateral confinement. The confinement effectiveness coefficient for the strength enhancement of the cylinders by FRP wrap was obtained as 2.27 from the regression analysis.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.429-438
• /
• 2019

Microbially induced carbonate precipitation (MICP) is an innovative soil improvement approach utilizing metabolic activity of microbes to hydrolyze urea. In this paper, the shear response and the erodibility of MICP-treated sand under axial compression and submerged impinging jet were evaluated at a low confining stress range. Loose, poorly graded silica sand was used in testing. Specimens were cemented at low confining stresses until target shear wave velocities were achieved. Results indicated that the erodibility parameters of cemented specimens showed an increase in the critical shear stress by up to three orders of magnitude, while the erodibility coefficient decreased by up to four orders of magnitude. Such a trend was observed to be dependent on the level of cementation. The treated sand showed dilative behavior while the untreated sands showed contractive behavior. The shear modulus as a function of strain level, based on monitored shear wave velocity, indicated mineral debonding may commence at 0.05% axial strain. The peak strength was enhanced in terms of emerging cohesion parameter based on utilizing the Mohr-Coulomb failure criteria.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.305-308
• /
• 2008

이 연구에서는 최근 연구가 활발히 진행되고 있는 조립식 프리캐스트 세그먼트 콘크리트 교각공법에서 사용되어지는 기성 콘크리트 세그먼트의 횡 방향 구속철근에 의한 구속효과에 대한 연구를 수행하였다. 일반적으로 횡방향 구속철근에 의한 콘크리트의 구속효과는 구속효과계수에 의하여 결정되며 구속효과계수는 유효 구속 콘크리트 단면적과 구속 콘크리트 단면적의 비로서 결정된다. 유효 구속 콘크리트 단면적은 횡 방향 구속철근간의 간격에서 발생하는 Arching action에 의하여 결정되어지며 구속 콘크리트 단면적은 교각의 주철근비에 의하여 결정되어진다. 그러나 프리캐스트 콘크리트 세그먼트의 경우 세그먼트 상, 하부에 존재하는 피복을 고려하여야 한다. 즉 최상단 및 최하단에 배근되는 횡방향 구속철근에서 상, 하부 콘크리트 표면의 피복까지의 구속효과를 고려하여야 한다. 이 연구에서는 이에 대한 고려 방법을 제안하였다. 제안한 프리케스트 구속효과를 고려한 콘크리트 재료 모델을 RCAHEST에 적용하여 그 타당성을 검증하였다.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.19-25
• /
• 2001

A simple expression to predict bond strength of reinforcing bars with rib deformation to the surrounding is derived for the case of splitting bond failure. Finite element analysis is used to model the confining behavior of concrete cover. The roles of the interfacial properties, specifically, the friction coefficient, cohesion, the relative rib area and the rib face angle are examined. Values of bond strength obtained using the analytical model are in good agreement with the bond test results from the previous studies. The analytical model provides insight into interfacial bond mechanisms and the effects of the key variables on the bond strength of deformed bars to concrete. Based on the comparison between the analytical results and the test results, the values of cohesion, coefficient of friction, and the effective rib face angle are proposed.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.39-47
• /
• 2005

최근 들어 섬유혼합토가 도로 및 철도의 성토노반, 기층재료로 활용되기 시작하여 섬유혼합토의 변형특성에 대한 연구가 필요하게 되었다. 본 논문에서는 공진주시험을 통하여 섬유혼합토의 거동특성과 보강효과를 평가하였다. 여러 가지 입도의 사질토에 폴리프로필렌(polypropylene) 재질의 단섬유(staple fiber)를 중량비 0.3%로 혼합하여 시료를 성형하였다. 섬유혼합토의 최대전단변형계수는 양입도일수록 증가해, 비혼합토에 비해 최대 30%까지 증가하였다. 양입도의 전단변형계수는 빈입도보다 모든 전단변형률 범위에서 구속압에 관계없이 더 커, 양입도일수록 보강효과가 좋은 것으로 평가되었다.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.7-20
• /
• 2020

본 연구에서는 말뚝기초를 대상으로 지반조건을 고려한 동적 수평지반반력계수를 제안하기 위하여 수치해석을 수행하였다. 3차원 유한차분 프로그램을 사용하여, 다양한 지반의 전단파 속도에 따라 동적수치해석을 수행하였다. 수치해석 결과로부터 동적 p-y 곡선을 도출하여 동적 수평지반반력계수를 계산하는 데 필요한 보정계수(α)를 산정하였다. 분석결과, 본 연구에서 산정된 보정계수(α)는 기존 도로교 설계기준(2015)에 제시된 획일적인 값(α=2)이 아니라 지반의 전단파 속도와 구속압에 매우 큰 영향을 받는 것을 알 수 있었으며 이를 고려한 함수식으로 제안하였다. 제안된 α의 적용성 분석을 위해 서로 다른 해석 기법(등가정적해석방법과 동적해석방법)에서의 적용성을 비교하였다. 그 결과, 제안된 보정계수(α)를 사용하는 방법은 기존 동적 수평지반반력계수를 사용하는 방법에 비해 지반-말뚝 시스템의 수평거동 특성을 비교적 적절하게 예측함을 알 수 있었다.