• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.150-154
• /
• 2008

Twenty five albino rats were divided into five groups for conducting this experiment. The first group was for positive control (Vitamin C, ascorbic acid), the second group was of Panax ginseng (10 mg/kg body weight) treated group after bio-activity assay, the third group was of mercuric chloride treated group (0.033 mg/kg body weight) based on calculating $LD_{50}$ 9.26 mg/kg body weight by probit analysis, the fourth group was of mercuric chloride (0.033 mg/kg body weight) followed by Panax ginseng (10 mg/kg body weight) and the fifth group was Panax ginseng (10 mg/kg body weight) followed by mercuric chloride (0.033 mg/kg body weight) treated group. The interval between intake of Panax ginseng and mercuric chloride was of 2 hours in groups, fourth and fifth respectively. Comparative free radical scavenging property of Panax ginseng was studied under three in vitro models (role model for calculating scavenging activity) viz. DPPH method (hydroxyl free radicals), Nitric oxide method (nitrile free radicals) and Lipid peroxidation (mercury free radicals).

• ETRI Journal
• /
• v.35 no.4
• /
• pp.571-577
• /
• 2013

The fabrication of a thin-film transistor backplane and a liquid-crystal display using printing processes can eliminate the need for photolithography and offers the potential to reduce the manufacturing costs. In this study, we prepare contact via structures through a poly(methyl methacrylate) polymer insulator layer using inkjet printing. When droplets of silver ink composed of a polymer solvent are placed onto the polymer insulator and annealed at high temperatures, the silver ink penetrates the interior of the polymer and generates conducting paths between the top and bottom metal lines through the partial dissolution and swelling of the polymer. The electrical property of various contact via-hole interconnections is investigated using a semiconductor characterization system.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2255-2259
• /
• 2012

Aggregation of titania nanotubes (TNTs) fabricated by hydrothermal method were calcined in air and dry nitrogen; Changes in morphology and crystallinity of the nanotubes were studied by means of TEM, EDX, and XPS. EDX patterns and XPS spectra proved that there were a certain densities of oxygen vacancies in TNTs annealed in $N_2$. The photocatalysis experiments revealed TNTs/$N_2$ possesses significantly higher photocatalytic efficiency than TNTs annealed in dry air to degrade methylene blue. The correlation between oxygen vacancies and photocatalytic property may be attributed to: 1) oxygen vacancies might have affected results on water molecules adsorption and increase of the hydroxyl concentration; and 2) oxygen vacancies resulted in some changes in electronic structure of TNTs/$N_2$ aggregation and Fermi level extends into the conducting band.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1919-1924
• /
• 2012

Poly(anthranilic acid) was synthesized by rapid mixing method using 5-sulphosalicylic acid as a dopant. The synthesized polymer was characterized by various techniques like FT-IR, UV-Visible, and X-ray diffraction $etc.$, The FT-IR studies reveal that the 5-sulphosalicylic acid is well doped within the polymer. The morphological property was characterized by field emission scanning electron microscopic technique. The electrochemical properties of the polymer were studied by cyclic voltammetric method. The synthesized polymer was used to modify glassy carbon electrode (GCE) and the modified electrode was found to exhibit electrocatalytic activity for the oxidation of uric acid (UA).

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.447-451
• /
• 1999

Silver has the highest electrical conductivity of all metals and consequently this property is an attractive feature which makes it a leading candidate for use in electronic devices. The research conducted was focused primarily on the development of a process for obtaining a deposited silver-coating onto alumina, for applications related to electrical-conducting devices and, ancillarily, catalysts. Alumina balls and plane substrates were utilized for the investigation. The coating process employed an aqueous ammoniacal silver-nitrate electrolytes with a formaldehyde solution as the reductant. Modifying additives-an activator which would be expected to promote good deposition-characteristics onto the (dielectric) substrate and an inhibitor which would obviate homogeneous reduction (precipitation) of silver was observed when the activator-containing silver-electrolyte reductant constituents were combined. However, the silver-electrolyte/reductant system with inhibitor could be employed (at 8$0^{\circ}C$) to achieve a viable (subject to future research optimization) coating on alumina. The influence of the processing temperature on the deposition process was delineated during the course of the research. The morphology of the deposited-silver on the alumina balls was assessed by SEM imaging. A tape-peel test was employed, with the plane substrates, to semi-quantitatively characterize the adhesion to the alumina.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.131-138
• /
• 2019

To improve the performance of Si anodes in advanced Li-ion batteries, the design of the electrode plays a critical role, especially due to the large volumetric expansion in the Si anode during Li insertion. In our study, we used a simple fabrication method to prepare Si-based electrodes by grafting polyacrylic acid (PAA) to a carboxymethyl cellulose (CMC) binder (CMC-g-PAA). The procedure consists of first mixing nano-sized Si and the binders (CMC and PAA), and then coating the slurry on a Cu foil. The carbon network was formed via carbonization of the binders i.e., by a simple heat treatment of the electrode. The carbon network in the electrode is mechanically and electrically robust, which leads to higher electrical conductivity and better mechanical property. This explains its long cycle performance without the addition of a conducting agent (for example, carbon). Therefore, the partially carbonized CMC-g-PAA binder presented in this study represents a new feasible approach to produce Si anodes for use in advanced Li-ion batteries.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.2
• /
• pp.132-142
• /
• 2022

We investigate the performance of multi-body wave energy converters (WECs). This investigation considers multiple scattering of water waves by the buoys of a WEC under the generalized mode approach. Predominantly, the effect of a WEC's configuration on its energy extraction is studied in this research. First, single-row terminator and single-column attenuator arrays of vertical cylinders have been studied. The performance of these attenuator arrays shows that the wall effect induced by the periodic buoys influences the wave propagation and energy extraction in these WECs. Further studies show that a single-row terminator array of vertical cylinders performs better than the corresponding single-column attenuator array. Subsequently, multi-row terminator arrays of vertical cylinders are investigated by conducting a parametric study. This parametric study shows that the hydrodynamic property of three resonance phenomena makes energy extraction efficiency drop down, and the magnitude of energy extracted oscillates between the resonance points in these WECs. Finally, a 4×8 terminator array of vertical cylinders is studied to determine the effect of various d_x (x-directional distance between adjacent rows) within this WEC on its performance. In particular, this study enforces at least two equal d_x values within the 4×8 terminator array of vertical cylinders. It shows that a small value of this d_x leads to better energy extraction efficiency in some of these various d_x arrays than that of a corresponding regular array with the same d_x.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.30-34
• /
• 2022

Effects of electron beam (EB) irradiation on the mechanical strength of Cu (conducting sheath) and Nb (diffusion barrier) of Cu/Nb/MgB₂ superconducting was investigated. Wire- and tape-type Cu/Nb/MgB₂ samples were irradiated at E-beam energy of 2.5 MeV and 5 mA and a maximum E-beam dose was 5×10¹⁷ e/m². The hardness value of Cu and Nb region was measured by the Vickers micro-hardness method. In the case of the wire sample, the hardness of Cu and Nb increased proportionally as the dose was increased up to 5×10¹⁷ e/m², whereas in the case of the tape sample, the hardness increased up to a dose of 0.5×10¹⁷ e/m², and decreased slightly 5×10¹⁷ e/m². The hardness increase of Cu and Nb is believed to be due to the decrease of the deformability of Cu and Nb due to the defects formed inside the materials by E-beam irradiation.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.85-90
• /
• 2022

The article is devoted to the consideration of the features of the application of criminal and legal countermeasures against cybercrime in the conditions of martial law. While conducting this research, we found an opportunity to formulate the author's recommendations for solving the most complex law enforcement problems, as well as to propose changes to the Criminal Code of Ukraine aimed at eliminating the flaws of the analyzed Law, the adoption of which will contribute to the achievement of higher efficiency of the relevant criminal law prescriptions. It is argued that the removal of the previously existing in the footnote of Art. 361 of the Criminal Code of a fundamentally important caveat regarding the fact that when assessing "significant damage", the mentioned property equivalent was to be taken into account only when such damage consisted in causing material damage, which led to a significant and unjustified narrowing of the scope of potential application of Part 4 of Article 361 of the Criminal Code.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.1
• /
• pp.77-98
• /
• 2024

The mourning attire worn by the Sangju (Chief Mourner) during Confucian funeral rituals is known as Gulgeonjebok. It is comprised of Gulgeon, Sujil, and Hyogeon on the head, and Jungui underneath. On top of the Jungui, the ceremonial garments called Choeui are worn, along with Choesang. Yojil and Gyodae are then tied around the waist. Mahye and Hangieon are worn on the feet, and a walking stick made of bamboo, paulownia, or willow is carried. A needlework master, Choe Onsun, who was designated as a Holder of Intangible Cultural Property of Jeollabuk-do on November 27, 1998, is recognized for her efforts in restoring and recreating the forgotten Gulgeonjebok. Thanks to her endeavors, the period, regional, and cultural characteristics of Gulgeonjebok in the Jeolla Province have been preserved. This study aims to examine and reproduce characteristic items of Gulgeonjeboks handed down by a needlework master, Choe, by conducting an empirical study on the dimensions and schematization of the Gulgeon, the method of cutting, and the sewing process. The empirical research on Gulgeojebok is expected to further enhance traditional sewing skills. It will also serve as a foundation for deepening the level of research on traditional dress and sharing traditional cultural heritage.