• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.569-576
• /
• 2014

There were overwhelming high-frequency electromagnetic noises in 200kW-class hybrid electric vehicle(HEV) although EMC control strategy had been applied to cope with the electromagnetic noises during the development of HEV. This paper investigates the characteristics of the conducted and radiated emission noises, the source and path of noises, and the effects of EMI on the electronics. Finally the design concept of noise control is proposed.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.498-501
• /
• 2002

In the conventional PWM converter, high-frequency switching techniques was used for high-density of energy, but occurred a lot of problems such as switching losses, switching voltage/current stresses, EMI(Electromgnetic Interference) and so on. To overcome these problems, various soft switching techniques have been presented. However these techniques are focused on reducing switching losses and voltage/current stresses . The simulation and experimental results are shown that the active clamp ZVS flyback converter with the proposed RPWM(Random Pulse Width Modulation) technique reduces the conducted noise.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.298-308
• /
• 2017

This paper presents a Interleaved Buck Converter(IBC) system with Random PWM to reduce electromagnetic noise by harmonics. Swithced mode power supply generally controlled by high switching frequency have a electromagnetic interference(EMI) issue due to the high-voltage/high-current switching to regulate the voltage in buck converter. To solve the problem. we present a novel IBC system with PRBS. IBC system has two active switches with 180 phase difference that controll the cicuit with two PWM signal. IBC system may be disadventageous for the cost due to the addtion of one set of switch, but it has adventages of power distribution, current ripple cancellation, fast transient response, and passive component size reduction. To verify the validity of study, simulation program has been bulit using PSIM and the experimental results of IBC system using RPWM was compared with the conventinal PWM and randomized PWM.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this research, we develop an airborne equipment radiating S/C-band signal to a target located at a long distance. RF interface of the equipment comprises band-specific transmitters and an broadband antenna to satisfy EIRP(effective isotropic radiated power) requirements. The equipment is in a shape of a POD like an aircraft fuel tank. The measured weight of the equipment is 119.8 kg, the CG(center of gravity) is 1391.35 mm and the MOI(moment of inertia) are 46.07 ± 0.05(I_yy) kg·㎡, 45.36 ± 0.09(I_zz) kg·㎡. All results are found to meet the requirements for aircraft installation. To verify flight safety, EMI(electromagnetic interference) tests (RE102, CE102), environmental tests (high/low temperature operation, altitude), intra-system EMC(electromagnetic compatibility) and HERP(hazards electromagnetic radiation personnel) tests have been conducted and all the test results met the requirements. It is confirmed that the equipment could be mounted on the aircraft by meeting all electrical and mechanical requirements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2002

A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of the ballast, DC link voltage should be determined by taking into account the peak voltage of lamp and the maximum flux density should be kept 0.2[T] on all of inductors. AR inductor at bridge diode is employed in order to remove currant harmonics from PFC. An inductor is connected in series with an electrolytic capacitor at DC link to reject high-frequency current. The acoustic resonance is eliminated using the stead spectrum technique. The electronic ballast for 250[W] metal-halide discharge lamp is implemented and 96[%] efficiency, no acoustic resonance and low conducted EMI level are accomplished.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.507-514
• /
• 2011

Recently, we developed a new subway train with many cooperative companies. The main controller of the subway train is Control and Monitoring System (TCMS), so we conducted requirement analysis of TCMS considering system performance, easy maintenance and service oriented flexibility. Hence, we adopted new bus architecture and QNX as a Real-time Operating System (RTOS) and developed hardware systems. The functions of TCMS are employed into two computers, service computer and control/monitor computer, to increase on their performance and to yield easy maintenance and to satisfy customer needs. The TCMS controls and monitors control devices equipped in the train through various protocols which are implemented in hardware. In order to evaluate the performance of the system and to satisfy reliability, various experiments including EMC/ECI were performed. Now the TCMS is installed on the newly developed train and is under performance evaluation through test driving.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.501-523
• /
• 2016

Electromechanical impedance (EMI) based structural health monitoring is performed by measuring the variation in the impedance due to the structural local damage. The impedance signals are acquired from the piezoelectric patches that are bonded on the structural surface. The impedance variation, which is directly related to the mechanical properties of the structure, indicates the presence of local structural damage. Two traditional EMI-based damage detection methods are based on calculating the difference between the measured impedance signals in the frequency domain from the baseline and the current structures. In this paper, a new structural damage detection approach by analyzing the time domain impedance responses is proposed. The measured time domain responses from the piezoelectric transducers will be used for analysis. With the use of the Time Frequency Autoregressive Moving Average (TFARMA) model, a damage index based on Singular Value Decomposition (SVD) is defined to identify the existence of the structural local damage. Experimental studies on a space steel truss bridge model in the laboratory are conducted to verify the proposed approach. Four piezoelectric transducers are attached at different locations and excited by a sweep-frequency signal. The impedance responses at different locations are analyzed with TFARMA model to investigate the effectiveness and performance of the proposed approach. The results demonstrate that the proposed approach is very sensitive and robust in detecting the bolt damage in the gusset plates of steel truss bridges.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.504-508
• /
• 2004

An EMC analysis of a switched mode power supply (SMPS) have been usually using unbalance circuit topologies and the major factor of disturbance is parasitic capacitance. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common mode conducted noise. In this paper presents the relationship between common mode current and radiated field.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.438-442
• /
• 2001

Much attention has given to EMI effects created by variable speed ac drive system. This paper focuses on the switching technique to mitigate common mode voltage. Zero switching states of inverter control invoke large common mode voltage. Using inversed carrier wave, zero switching states are removed. In addition, proposed technique is easy to apply to existing 2-level inverter design. And common mode mitigation technique for sinusoidal PWM is also presented. Proposed switching technique is implemented with a 2.2kw 1735rpm induction motor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.148-151
• /
• 2006

The DC power-bus' resonance is frequently attributed to EMI sources in the PCBs. Subsequently, it will ruin the digital signal integrity within one system or between adjacent systems in the form of conducted or radiated emission. Hence, since it is of importance to examine the PCB's emission, this paper sheds a light on the radiated emission from the power-bus with regards to its resonance modes. A full-wave analysis method is used to calculate the impedance and radiated electric fields and is validated by physics and an EM analysis tool.