• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.41-46
• /
• 1992

In this paper we report how to design integrated-mirror etalons for surface-emitting lasers and photonic switching without time-consuming numerical calculation. It consists of the following two-step process (step 1) find the minimum reflectance to achieve the maximum allowable linewidth. (step 2) find the number of the quarter-wave layers in each mirror to realize the reflectance given by step 1. The condition for maximum transmission in an integrated- mirror etalon is also derived. Under this condition we can achieve the required linewidth with the minimum number of quarterwave layers.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2572-2592
• /
• 1996

A low-Reynolds-number second moment turbulence closure was developed with the aid of DNS data. Model coefficients of nonlinear return to isotropy term were derived by use of Cayley-Hamilton theorem and two component turbulence limit condition as the functions of invariances of anisotropy and turbulent Reynolds number. Launder and Tselepidakis' cubic mean pressure strain model was modified to fit the predicted pressure-strain components to the DNS data. Two component turbulence limit condition was the precondition to be satisfied in developing the second moment turbulence closure for the realizable Reynolds stress prediction. But the satisfactions of Reynolds stress level and pressure-strain level of each component were compromised because the satisfaction of both levels was impossible.

• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.45-60
• /
• 2019

This paper is devoted to proposing a new approach for damage detection of structures. In this technique, the biconjugate gradient method (BCG) is employed. To remedy the noise effects, a new preconditioning algorithm is applied. The proposed preconditioner matrix significantly reduces the condition number of the system. Moreover, based on the characteristics of the damage vector, a new direct search algorithm is employed to increase the efficiency of the suggested damage detection scheme by reducing the number of unknowns. To corroborate the high efficiency and capability of the presented strategy, it is applied for estimating the severity and location of damage in the well-known 31-member and 52-member trusses. For damage detection of these trusses, the time history responses are measured by a limited number of sensors. The results of numerical examples reveal high accuracy and robustness of the proposed method.

• 한국농림기상학회지
• /
• 제5권3호
• /
• pp.208-212
• /
• 2003

가로등과 보안등의 증가로 인한 야간조명의 확대와 야간 이동차량의 증가로 전조등 등 농경지 주변에 간헐적으로 조명이 이루어지고 있어 2000년부터 2001년까지 2년 동안 암기간과 야간조파가 벼와 콩의 출수 및 개화에 미치는 영향을 구명하고자 수행한 시험결과를 요약하면 다음과 같다. 12시간 암기 중 3시간마다 10분간 백열등(50∼60 lux)으로 조명한 야간조파 처리에 의하여 벼 생육은 두 품종 모두 암기처리 12시간에 비해 간장은 증가되었으며, 수당립수는 감소되었다. 벼의 출수는 야간조파시 암기처리 12시간에 비하여 일품벼 9일, 화성벼는 26일 지연되었으며, 12시간의 암기처리에 비하여 9시간 암기처리시 일품벼 47일, 화성벼는 41일 지연되었다. 야간조파에 의한 황금콩의 생육은 야간조파시 암기처리 12시간에 비해 경장파 절수가 증가되었으며, 협수는 감소되었고, 12시간의 암기처리에 비하여 9시간 암기처리시 경장 및 절수는 증가되었지만 협수는 감소되었다. 콩의 개화까지 소요일수는 야간조파시 암기처리 12시간에 비하여 4일 지연되었으며, 12시간의 암기처리에 비해 9시간 암기처리시 19일 지연되었다.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.17-22
• /
• 2006

Surface modifications like rib-roughening and displaced insert devices like the twisted tape are commonly used in applications such as compact heat exchangers and cooling systems. In this paper, regionally averaged heat transfer distributions in square channels with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. Each wall of the square channel is composed of isolated aluminum sections. Regionally averaged Nusselt number and channel averaged Nusselt number in turbulent air flows are presented for Reynold numbers from 8,900 to 29,000. We have obtained the following conclusions from the experimental study: 1) The local Nusselt number in the two-sided heated case is higher than that in the four-sided heated condition. 2) In the 4 heating wall channel with twisted tape inserts, Nusselt number based on bottom wall temperature is enhanced by 1.2 - 1.6 times if adding the axial interrupted ribs on the bottom wall only. 3) The twisted tape with interrupted ribs under the two-sided heating condition produces the highest heat transfer coefficient.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.1009-1016
• /
• 2001

The heat transfer enhancement by pulsatile flow in a triangular grooved channel has been experimentally investigated in this study The experiment was performed in the ranges of the Reynolds number from 270 to 910, the pulsatile fraction from 0.125 to 0.75, and the Strouhal number from 0.084 to 0.665. It was measured that the heat transfer improves up to 350% compared with the steady flow case at Re=270,$\eta=0.5$, and St=0.335. The heat transfer enhancement was found to increase as the pulsatile fraction increases and the Reynolds number decreases. It was also found that the heat transfer enhancement is maximized at a specific pulsatile frequency satisfying the resonant condition. The nondimensional frequency, i.e., the Strouhal number at the resonant condition was found to increase as the Reynolds number decreases. The flow visualization revealed that the heat transfer enhancement results from the strong mixing caused by the repeating sequence of vortex formation, rotation and subsequent ejection from the grooves by the pulsatile flow.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.538-544
• /
• 2010

An experimental investigation is presented to study the effect nozzle spacing, jet to plate spacing and Reynolds number on the local heat transfer to normally upward impinging submerged circular water jets on a flat heated surface. Nozzle arrays are a single jet(nozzle dia. = 8 mm), a row of 3 jets(nozzle dia. = 4.6 mm, nozzle spacing = 37.5 mm) and a row of 5 jets(nozzle dia. = 3.6 mm, nozzle spacing = 25 mm), and jet to plate spacing ranging from 16∼80 mm(H/D = 2∼10) is tested. Reynolds number based on single jet exit condition is varied 30000∼70000($V_o$ = 3∼7 m/s). Except for the condition of H/D = 10, the average Nusselt number of multi-jet is higher than that of single jet. For H/D = 2, average Nusselt number is increased by 50.3∼82.5% for a row of 3 jets and by 52.9∼65.2% on a row of 5 jets when compared to the average Nusselt number on the single jet.

• 대한수의학회지
• /
• 제46권3호
• /
• pp.255-261
• /
• 2006

Experimental animals have been used to biological and medical purposes and the animals must be, for these purposes, healthy and clean to microbial infection. However, the animals can be easily exposed to pathogenic microorganism via several routes. Of the routes, environmental conditions are the most important factors to keep the animals healthy and clean, especially air condition. Monitoring of air-condition has been required to keep the animal healthy and clean. However, any guideline is not available for experimental conditions with pigs. Therefore, the sampling times and points were compared in different conditions to establish an optimal protocol for monitoring of air borne bacteria. Tryptic soy agar(TSA), blood agar containing 5% defibrinated sheep blood and Sabraud dextrose agar(SDA) were used as media to capture total bacteria, pathogenic bacteria and fungi, respectively. Two methods, compulsive capture using an air-sampler and capturing fall-down bacteria were used to capture the microorganisms in the air. The points and time of capturing were different at each experiment. Air borne microorganisms were captured at three and five points in the open and closed equipments, respectively. Air was collected using an air-sampler for 1 min and 5 min and the agar plates as open status were left from 30 min to 2hr. At first, we monitored an experimental laboratory which dealt with several pathogenic bacteria and then, a protocol obtained from the investigation was applied to open or close experimental conditions with pigs. Number of bacteria was high from 10:00 to 15:00, especially on 13:30-15:30 but sharply decreased after 17:00. The tendency of the number of bacteria was similar between two methods even though the absolute number was higher with air sampler. Critical difference in the number of cells was observed at 5 min with air sampler and 2 hr with fall-down capturing method. However, 1 min with air sampler and 1 hr with fall-down capturing were the best condition to identify bacterial species collected from the air. Number of bacteria were different depending on the sampling points in closed condition but not in opened condition. Based on our results, a guide-line was suggested for screening air-borne microorganism in the experimental conditions with pigs.

• 한국잡초학회지
• /
• 제15권4호
• /
• pp.262-269
• /
• 1995

인공안개조건하에서 한국들잔디의 생장.잡초경합양상 및 제초제 반응을 검토코자 온실내 pot 시험으로 수행하였다. 안개조건에서 들잔디의 초장 및 엽령은 전 생육기간을 걸쳐 증가하는 경향을 보였으며 최종 파종 후 100일째 분얼수 및 지상부 생체중등의 수량은 각각 24 및 29% 감소되었다. 안개조건에서 발생 잡초수는 큰 차이가 인정되지 않았으나 그 발생량은 두배 이상으로 증가되었으며 주요한 발생초종은 바랭이, 피, 미국개기장, 쇠비름, 흰명아주, 한련초 및 방동사니류 등이었다. 안개조건에서 잡초와의 경합은 40일 이상 경합 기간의 처리가 들잔디의 초장을 크게 감소시켰고 분얼수는 전 경합기간처리에서 감소되었다. 또한 안개조건에서 pot당 입묘수 및 지상부생체중은 역시 40일 이상으로 경합기간이 길어질수록 감소하였다. 들잔디의 초장을 근거로 한 약해는 토양처리된 Oxyfluorfen에서 가장 컸고 안개처리조건하에서는 Bensulide에서 약해정도가 더 컸고 그에 따른 초장감소가 인정되었으나 Flazasulfuron 및 Mecoprop는 오히려 초장이 증가되었다. 한편 지상부생체중으로 본 약해는 Flazasulfuron 처리에서는 무처리와 대등하였으나 나머지 다른 제초제들은 심하게 증가하였다. 약제처리 후 40일째 생체중을 근거로 한 잡초방제가는 안개조건의 Bensulide 및 Mecoprop 처리에서 각각 6 및 13% 감소하였다.

• East Asian mathematical journal
• /
• 제29권3호
• /
• pp.327-335
• /
• 2013

In this paper we consider the quadratic matrix equation which can be defined by $$Q(X)=AX^2+BX+C=0$$, where X is a $n{\times}n$ unknown complex matrix, and A, B and C are $n{\times}n$ given matrices with complex elements. We first introduce a couple of condition numbers of the equation Q(X) and present normwise condition numbers. Finally, we compare the results and some numerical experiments are given.