Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Impingement Heat Transfer Within a Row of Submerged Circular Water Jets

1열 원형 서브머지드 충돌수분류군에 의한 열전달의 실험적 연구

  • Ohm, Ki-Chan (Department of Machine Design, Inha Technical College)
  • 엄기찬 (인하공업전문대학 기계설계과)
  • Received : 2010.03.22
  • Published : 2010.08.10
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental investigation is presented to study the effect nozzle spacing, jet to plate spacing and Reynolds number on the local heat transfer to normally upward impinging submerged circular water jets on a flat heated surface. Nozzle arrays are a single jet(nozzle dia. = 8 mm), a row of 3 jets(nozzle dia. = 4.6 mm, nozzle spacing = 37.5 mm) and a row of 5 jets(nozzle dia. = 3.6 mm, nozzle spacing = 25 mm), and jet to plate spacing ranging from 16∼80 mm(H/D = 2∼10) is tested. Reynolds number based on single jet exit condition is varied 30000∼70000($V_o$ = 3∼7 m/s). Except for the condition of H/D = 10, the average Nusselt number of multi-jet is higher than that of single jet. For H/D = 2, average Nusselt number is increased by 50.3∼82.5% for a row of 3 jets and by 52.9∼65.2% on a row of 5 jets when compared to the average Nusselt number on the single jet.

Keywords

References

  1. Womac, D. J., Incropera, F. P., and Ramalhyani, S., 1994, Correlating equations for impingement cooling of small heat sources with multiple circular liquid jets, ASME J. Heat Transfer, Vol. 116, pp. 482-486. https://doi.org/10.1115/1.2911423
  2. Besserman, D. L., Incropera, F. P., and Ramadhyani, S., 1992, Heat transfer from a square source to an impinging liquid jet confined by an annular wall, ASME J. Heat Transfer, Vol. 114, pp. 284-287. https://doi.org/10.1115/1.2911260
  3. Garimella, S. V. and Rice, R. A., 1995, Confined and submerged liquid jet impingement heat transfer, ASME J. Heat Transfer, Vol. 117, pp. 871-877. https://doi.org/10.1115/1.2836304
  4. Fitzgerald, J. A. and Garimella, S. V., 1997, Flow field effects on heat transfer in confined jet impingement, ASME J. Heat Transfer, Vol. 119, pp. 630-632. https://doi.org/10.1115/1.2824152
  5. Zhou, D. W. and Ma, C. F., 2006, Radial heat transfer behavior of impinging submerged circular jets, Int. J. Heat Mass Transfer, Vol. 49, pp. 1719-1722. https://doi.org/10.1016/j.ijheatmasstransfer.2005.10.021
  6. Ma, C. F., Zheng, Q., and Lee, S. C., 1997, Impingement heat transfer and recovery effect with submerged jets of large Prandtl number liquid-1, Unconfined circular jets, Int. J. Heat Mass Transfer, Vol. 40, pp. 1481-1490. https://doi.org/10.1016/S0017-9310(96)00069-5
  7. Bensmaili, A. and Coeuret, F. 1990, Overall mass transfer between a solid surface and submerged or unsubmerged liquid multi jets, J. Electrochem. Soc, Vol. 137, No. 6, pp. 1744-1750. https://doi.org/10.1149/1.2086792
  8. Ohm, K. C., 2005, An experimental study of heat transfer in a submerged water jet, Journal of the Korean Solar Energy Society, Vol. 25, No. 4, pp. 101-110.
  9. Lee, S. J., Lee, J. H., and Lee, D. H., 1994, Local heat transfer measurements flow eliptic jet impinging on a flat plate using crystal, Int. J. Heat and Mass Transfer, Vol. 37, No. 6 pp. 967-976. https://doi.org/10.1016/0017-9310(94)90221-6
  10. Brevet, P., Dejeu, C., Dorignac, E., Jolly, M., and Vullierme, J. J., 2002, Heat transfer to a row of impinging jets in consideration of optimization, Int. J. Heat and Mass Transfer, Vol. 45, pp. 4191-4200. https://doi.org/10.1016/S0017-9310(02)00128-X
  11. Goodro, M., Park, J., Ligrana, P., Fox, M., and Moon, H-K., 2007, Effects of Mach number and Reynolds number on jet array impingement heat transfer, Int. J. Heat and Mass Transfer, Vol. 50, pp. 367-380. https://doi.org/10.1016/j.ijheatmasstransfer.2006.06.007
  12. San, J. Y. and Lai, M. D., 2001, Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets, Int. J. Heat and Mass Transfer, Vol. 44, pp. 3997-4007. https://doi.org/10.1016/S0017-9310(01)00043-6
  13. Womac, D. J., Ramadhyani, S., and Incropera, F. P., 1993, Correlating eqation for impingement cooling of small heat sources with single circular liquid jets, ASME, J. Heat Transfer, Vol. 115, pp. 106-115. https://doi.org/10.1115/1.2910635
  14. Garret, K. and Webb, D. W., 1999, The effect of drainage configuration on heat transfer under an impinging jet array, ASME J. Heat Transfer, Vol. 121, pp. 803-810. https://doi.org/10.1115/1.2826069