• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.32-37
• /
• 1986

In order to get the fundamental information that could be useful to judge the potentiality of occurrence of rapid shallow landslide in the objective slope, factors selected on Jinhae regions in Korea, where many landslides were caused by heavy rainfall of daily 465 mm and hourly 52mm in August 1979, was carried out through the multiple statistics of quantification method (II) by the electronic computer. The net system with $2{\times}2cm$ unit mesh was overlayed with the contour map of scale 1:5000. 74 meshes of landslides and 119 meshes of non-landslide were sampled out to survey the state of vegetative cover and geomorphological conditions, those were divided into 6 items arid 27 categories. As a result, main factors that would lead to landslide were shown in order of vegetation, slope type, slope position, slope, aspect and numbers of stream. Particularly, coniferous forest of 10 years old, concave slope and foot of mountain were main factors making slope instability. On the contrary, coniferous forest of 20-30 years old, deciduous forest, convex slope and summit contributed to the stable against Landslide. The boundary value between two groups of existence and none of landslides was -0.123, and its prediction was 72%. It was well predicted to divide into two groups of them.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.64-73
• /
• 1998

In twin spool aero-engine, there may be a S shaped annular duct between high pressure and low pressure spools. The flow passing this S shaped duct experiences the flow acceleration and deceleration due to the convex and concave surface of the duct as well as the increase of blockage according to the boundary layer growth along the surfaces. So, the high pressure compressor which is located behind the S shaped duct is influenced by the non-uniform flow field generated by the geometry of inlet duct. To study the influence of the S shaped duct on the centrifugal stage, performance tests were implemented for the compressor with straight cylindrical inlet duct and with S shaped inlet duct, respectively. The test results showed that the performance, such as pressure ratio and efficiency, of the compressor with S shaped duct was worse than that of the compressor with cylindrical duct. And the compressor with S shaped duct had reduced maximum flow rate around design speed. To investigate the cause of performance degradation, flow anlaysis was performed for the impeller in front of which is located S shaped annular duct. The result of CFD showed the strong acceleration of the flow in the axial direction around the inducer tip region which caused the increase of relative mach number and the decrease of incidence angle of the flow.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.215-222
• /
• 2011

In order to obtain high resolution images, a focusing ultrasonic transducer operated in very high frequency (VHF) range was fabricated and its characteristics were evaluated. A 9-${\mu}m$ thick PVDF film with only one metalized surface for electric ground was adhered to a CCP (Copper-clad polyimide) film by using epoxy. It was pressed by a metal ball to form a concave surface and its rear side was filled with the epoxy. The radius of curvature and the f-number of the fabricated transducer are 7.5 mm and 1.7, respectively. The pulse-echo measurement results from a target located at the focal point showed that the frequency bandwidth was 35.0 MHz and the insertion loss near the peak frequency of approximately 40 MHz was about 60 dB. Those values agreed well with the simulation results by the KLM equivalent circuit analysis including the effect of the epoxy bonding layer. When the image of thin copper lines by the 35 MHz transducer of the UBM (Ultrasonic Backscattering Microscope) system was compared with the image by the transducer fabricated in this study, the fabricated transducer was observed that the axial resolution was improved although the lateral resolution was degraded.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.689-695
• /
• 2007

The under developing estuarial port Bupsung is bounded by a river and the sea, and has several well developed tidal lands, where the littoral drift is strong due to the tide and the river discharge. The study area is located at the inner part of a concave bay and has a large tidal range due to the water discharge through the Watan-chun and Junnam-dike. In beginning stage of the ocean physical impact study, the tidal modeling is very important and difficult especially in this area. Moreover, we need a model experiment after the verification of the formulated model based on ocean survey. In this study, we constructed a numerical model to the Bupsung port coastal boundaries, which varies with the past and future development and made simulation with it. The result after development shows that there is a decrease of velocity on flood current and a increase on Ebb current and the minor variation of the tide level, compared with before development.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.25-34
• /
• 1976

The purpose of the present study on the radula of Korean marine gastropods is to determine the systematic position of the species by the radula features. The radula features of 9 Families based on the observation of specimens consisting of 31 species are described briefly as follows. 1. Naticidae; Radula formula 2-1-C-1-2. Rachidian is 3-cusped. All cusps are strong and pointed. The lateral tooth is massive and strong with a huge triangula cusp. Two marginal teethare slender, long and strong. 2. Cymatidae; Radula formula 2-1-c-1-2. Fachidian, 1-cusped. Cusp is strong and acute. The basal margin is toothed with a number of small denticles. The lateral tooth is beak-like and strong with groove inside. The marginal teeth are slender and pointed. 3. Tonnidae; Radula Formula 2-1-C-1-2. Rachidian, 3 cusped. Central cusp is huge, strong and abruptly pointed. Lateral cusp is blunt and relatively small. The lateral tooth and maginal teeth are identical to that of the preceding one. 4. Muricidae; Radula formula 1-C-1. Rachidian has 3 to 5 cusps. Central cusp, long, thick, strong and pointed. Lateral cusps are rather shorter than central, thick, strong and well cut with several minute denticles along outer margin. The lateral tooth is falciform. 5. Pyrenidae; Radula formula 1-c-1 Rachidian lacks of cusp. The base is thin, narrow, small and rectangular. Lateral tooth has 2 cusps with a crescent shaped base. 6. Buccinidae; Radula formula 1-C-1. Rachidian has 3 to 7 cusps. The base is massive and broadened laterally. The lateral tooth is large-and has 2 to 4 cusps. The central cusp is the shortest, and become longer towards the each side. 7. Busyconidae ; Radula formula 1-C-1. Rachidian, 3-cusped with a massive base. All cusps are pointed and strong. Centeral cusp is rather shorter than lateral one. Lateral tooth, 2-cusped. Inner cusp short about one half the length of outer one. 8. Fasciolariidae; Radula formula 1-C-1. Rachidian, 3 to 4-cusped. Very small in size. Lateral tooth broadened laterally with about 10 thin, long, sharp cusps. 9. Volutidae ; Only the rachidian exists. Rachidian, 3-cusped. All cusps are strong and sharply pointed. Central cusp is narrower than lateral ones. Anterior basal margin is concave.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.323-328
• /
• 1982

Kareius bicoloratus (Basilewsky) is one of the commonly found right-eye flounders and widely distributed in the coastal waters of Korea and Japan. On December 11,1980, the ailthors carried out an experiment to obtain a large number of fertilized eggs from wild adult fish caught by a trawler. The fish were obtained from Maisaka fish market, Shizuoka Prefecture, Japan. The egg is pelagic, spherical in shape and measuring 1.014-1.04 mm in diameter. The yolk as well as the egg capsule is colorless and transparent, and contain no oil globules. The hatching took place in 73 hr 45 min after fertilization at the water temperature $8.0-9.5^{\circ}C$. Newly hatched larvae are 3.09-3.146 mm in total length, with the anus situated in the middle of the body. The marginal fin does not have Pigment cells and myotome number is 17+20=37. Within one day after hatching, the larvae attained 3.77 mm in total length, and there appeared three or four melanophore on yolk sac. When the larvae attained 3.96 mm in total length, melanophores began to appear on the eye ball. Two days after hatching, the larvae attained 4.05 mm in total length, most of yolk material was absorbed, and the caudal fin began to grow at the terminal part of the notochord. When the larvae attained 4.21 mm in total length, mouth and eyes began to move. After 3 days, the larvae attained 4.342-4.394 mm in total length, alimentary canal differentiated, melanophores appeared on the lower jaw and posterior part of the fin membrane. When the larvae attaind 4.576 mm in total length, marginal line of dorsal fin membrane became concave.

• Journal of architectural history
• /
• v.8 no.3 s.20
• /
• pp.23-38
• /
• 1999

The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.1 s.47
• /
• pp.27-37
• /
• 2007

Here we discuss a geochemical characterisitc of rare earth element (REE) pattern of a Precambrain leucogranitic gneiss at Imweon, Gangwon Province, Korea. The outcrop includes biotite gneiss xenolith. The leucocratic granite gneiss contacting with biotite gneiss is pegmatitic. However, there is no evidence of contact metamorphism between biotite gneiss and leucocratic-pegmatitic granite gneiss. The leucocratic granite gneiss shows a specific phenomenon of M-type (convex curved) tetrad effect in chondrite-normalized REE patterns with large negative Eu anomaly. The degree of REE tetrad effect in the leucocratic-pegmatitic granitec gneiss is weak and shows partly W-type (concave curved) tetrad effect. The Eu anomaly of leucocratic granite gneiss has close relationship with the degree of tetrad effect as well as Ca/Sr ratio. Our results suggest that the REE tetrad effect from the leucocratic granite gneiss should be formed during differentiation process of granitic magma. We also confirmed that the weathering might affect Eu or Ce anomaly rather than the formation of REE tetrad effect in granitic rock.

• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.71-82
• /
• 2000

The purpose of this paper is to clarify geomorphic features and development on the boulder stream of granitoid in Korea. Considering the purpose and the method of this paper, three boulder streams are selected : Biseulsan(Mt. Biseul) boulder stream (Daegu city), Maneosan (Mt. Maneo) boulder stream(Gyeongnam province), Geumjeongsan(Mt. Geumjeong) boulder stream (Busan city). The boulder streams mentioned above are bigger in scale and more typical in shape than any other ones in the Korean Peninsula. The main results are summarized as follows. 1. The following are the main features of the boulder streams morphology : the mean gradient is $3{\sim}25^{\circ}$, the longer axes of the component boulders within the deposits averaged about 2m in length, the shapes of the component boulders may be both subangular and subrounded features. 2. The formation of the component boulders is associated with deep weathering of granitoid under warm humid conditions, and the downward movement of boulders occurred by solifluction and frost creep under periglacial conditions. 3. The geomorphic development stage of the boulder streams may be classified into four stages. These boulder streams come under fossil landform stage, the 4th stage ; evidence provided by lichens and weathering features indicate inactive or fossil landform. 4. In generally, boulder streams are well developed on shallow valley floors.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.383-390
• /
• 2011

Purpose: To correct the upper lip depression after the correction of unilateral cleft lip, autologous grafts such as bone, dermal, fascial grafts and fat injections or alloplastic implants are used. Transplanted bones, dermis and fascia have a tendency to be absorbed and have donor morbidity. Fat injections are absorbed inconsistently and alloplastic implants have problems such as foreign body reactions, protrusions and infections. Authors corrected the upper lip depression using conchal cartilage graft in unilateral cleft lip deformity and the results was analysed with photos. Methods: 26-unilateral cleft lip and 2-microform cleft lip cases, totally 28 cases were performed. Their mean age was 21.89 years. The male and female cases were 12 and 16, respectively. Under anesthesia (general: 18 cases and local: 10 cases), cavum conchae (n=8), cymba conchae (n=16) and whole conchae (n=4) were harvested. Transversely cut the margin of the obtained cartilage, we cut out the most bent portion and put a partial-thickness incision on concave surface in cases of excessive convexity. Then, we performed the onlay graft of the conchal cartilage via scar revision site in unilateral cleft lip and via the reconstruction site of the cupid bow in microform cleft lip. The augmentation of the upper lip was evaluated with photos. Adapting the baseline connecting between the both cheilions as a horizontal standard line, we measured the highest point among the tangents between the upper lip and nose (point a), the lowest point (point c), the middle point between a and c (point b) and the vertical line from the alare (point d) to the horizontal standard line. To assess the postoperative symmetry, we compared cleft side upper lip contour index (%) A,B,C,D=(a,b,c,d)-ch ${\times}$ 100/(ch-ch) and non-cleft side upper lip contour index (%) A',B',C',D'= (a',b',c',d')-ch ${\times}$ 100 / (ch-ch).h) Results: After the surgery, no complication was found except in one case which double layers graft performed in the cleft lip deformity, the lateral portion was protruded. The upper lip contour index, the difference of A and A' were-0.83%, and thus the mild depression was persisted. Difference of B and B', C and C', D and D' were 0.83%, 1.07%, 0.90%. There were statistically significant difference, and thus the depression of upper lip were improved generally. Conclusion: Authors performed the onlay graft of the conchal cartilage in unilateral cleft lip deformity and found that the depression of the upper lip was well corrected except the uppermost part when photogrammetrically analyzed.