• Bulletin of the Society of Naval Architects of Korea
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1973

In the Department of Naval Architecture, Seoul National University, the development of computer programs for the computer-aided ship design sponsored by the Ministry of Science and Technology has been begun. The project is to be accomplished as a four-year plan, and the results of the works of the first year, preliminary design of dry-cargo ships based on an optimization technique and some fundamental calculations accompanied with the basic design of ships such as calculations of displacement, hydrostatic characteristics of hull forms, stability, floodable length, load line and longitudinal section modulus, are given in the Report R-72-9[9] published by the sopnsor for the public interests. In this paper, the philosophy and methodological principles with which the preliminary design program given in Appendix II was developed are summerized.

• Journal of Technologic Dentistry
• /
• v.46 no.3
• /
• pp.61-66
• /
• 2024

Purpose: This study aimed to assess the accuracy of implant custom abutments according to the different radii of the curvature value. Methods: Two custom abutments with different radii of the curvature value were designed based on dental computer-aided design. Then, a total of 20 customized abutments, 10 of each design, were milled according to the designs. The fabricated custom abutments were scanned using a model scanner. Using Geomagic Control X (3D Systems) scanned files were superimposed on the designed files to evaluate trueness, and scanned files for each group were superimposed on each other to evaluate precision. Results: The trueness values of radius of curvature value (CV)-0.75 and CV-1.50 were 56.26±5.66 ㎛ and 47.10±2.64 ㎛, respectively. A significant difference (p<0.001) was found between the groups. The precision values of CV-0.75 and CV-1.50 were 26.87±1.24 ㎛ and 26.08±1.03 ㎛, respectively. No significant difference was found between the groups. Conclusion: The radius of the curvature value in the custom abutment design affected the machining accuracy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.427-435
• /
• 2017

The most important factor in the treatment of fully edentulous patients using implants is the shape of the definitive prosthesis. After the shape of the definitive prosthesis is determined, residual bone analysis and selection of the implant type, number and position should be followed. In this case, for restoration of an edentulous patient fully implanted (except the maxillary right lateral incisor) without considering definitive prosthesis, facial esthetics and possibility of fixed type prosthesis were evaluated using complete denture. It was determined that the fixed type prosthesis was possible. Implants that could not be used for the definitive prosthesis were excluded from the treatment plan and fixed type provisional restorations were fabricated. After four months of provisional restorations, the patient showed stable occlusion and esthetic satisfaction. Definitive prosthesis was made of zirconia using CAD/CAM (computer aided design and computer aided manufacturing). The results were satisfactory during the 3 months of follow-up period after termination of treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1085-1091
• /
• 2014

Recently, 3D printing has received increasing attention due to its boundless potentials. Because 3D printing starts from 3D geometry information, computer-aided design (CAD) is an essential technology to build 3D geometry data. These days, education of 3D CAD for engineering students has been changed from the theoretical lecture to practical design training using commercial CAD software. As a result, open-ended design projects have replaced the traditional theoretical examinations to evaluate students' outcomes. However, such design projects are not enough to evaluate students' outcomes because their results are expressed in two-dimensional ways. In this paper, applications of 3D printing in engineering design education are discussed by describing the procedure and outcomes of design projects. It was found that the use of 3D printing could improve students' outcomes by fabricating real physical models out of their designs.

• Honam Mathematical Journal
• /
• v.27 no.4
• /
• pp.665-672
• /
• 2005

By its simplicity and efficiency, subdivision is a widely used technique in computer graphics, computer aided design and data compression. In this paper we prove a regularity theorem for ternary interpolatory subdivision scheme that can be applied to non-stationary subdivision. This theorem converts the convergence of the limit curve of a ternary interpolatory subdivision to the analysis of the rate of the contraction of differences of the polygons.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.2
• /
• pp.47-55
• /
• 1984

This paper is concerned with a computer-aided state assignment, that is, coding race-free internal states of asynchronous sequential circuits, and a method for minimizing the combinational network of asynchronous sequential circuits. The FORTRAN version of the peoposed algorithm results in race-free state assignments and reduction of the number of connections and gates with near minimal hardware cost. Some examples are designed by the proposed computer program to illustrate the algorithm in this paper. Finally, results are compared with those of the other methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.123-132
• /
• 1987

In this paper, we studied on the design of elliptic digital filters using the bilinear z transformation method, and proposed a design procedure satisfying prescribed specifications. The magnitude characteristics of digital filters are compared with its of analog filiters by computer simulation. Finaly we considered the quantization effects of digital filters. In cascader realization of fixed-point digital filters under dynamic range constraints, the outpout noise for IIR digital filters depends on the pole-zero pairing and ordering of the second order sections. Therfore an optmization procedure to finding a good ordering and pairing is very desirable. Thus, we proposed a sub-optimization procedure for finding "near optimal" solution.

• Transactions of Materials Processing
• /
• v.5 no.1
• /
• pp.27-36
• /
• 1996

In this paper a computer-aided design system for axisymmetric deep drawing process will be described. An approach to the system is based on the knowledge based system. The system has been written in AutoLISP with personal computer. The system is composed of four main modules such as input geometrical design test & rectification and user modification. the system which aids designer provides powerful capabilities for the design of axisymmetric deep drawing process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.61-72
• /
• 1983

This paper is a study on the plotting of engineering survey plan using Computer Graphic System. This study aims for a more systematic method in the computer aided design. Plotting of lines, characters in engineering survey plans are handled in a more systematic and effective way by means of the program developed in this paper.