• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.242-242
• /
• 2010

Si(100) 표면에 이온을 일정한 에너지로 dose량을 동일하게 유지하고, dose rate만을 변화시켜가며 주입한 후에 depth profile과 damage, 그리고 sheet resistance를 조사하였다. 일정한 에너지로 이온을 주입하여도 dose rate의 변화에 따라서 depth profile에 변화를 보이는 것을 확인할 수 있었고 sheet resistance역시 dose rate변화에 비례하여 변화하는 것을 확인할 수 있었다. 본 연구는 Crystal-TRIM program으로 computer simulation 하여 damage profile의 결과를 통해 dose rate가 클수록 시료 표면 근처에 잔류 damage의 양이 높게 나타나는 것을 알 수 있었고 그 잔류 damage의 표면근방 분포가 sheet resistance에 직접적인 영향을 미친다는 것을 확인할 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.22-29
• /
• 2004

Runout causes severe differences among cutting force waveforms due to changes of rotational radii. Thus a runout model must be included in a cutting force model to simulate cutting force accurately. In this paper, a runout modeling method and a measurement method using a dialgauge were developed, which were easy to apply. To calculate runout parameters, a computer program algorithm which obtained runout parameters from measurement values was developed. Cutting force waveforms simulated from cutting force model considering runout effect and measured from experiments had good agreements for their wave size and order.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.571-577
• /
• 2004

The impact behavior of TFT-LCD module is very complicated because the module is assisted with three parts such as back light unit, LCD Panel and top chassis. Especially, the back light unit is constructed with several small and thin parts made by plastics or steels. The design of the back light unit is very important because the recent demand is more lighter, thinner and narrower module. The aim of the present study is the investigation of mechanical characteristics during impact loading. The back light unit must assist TFT-LCD Panel made by glass and guide qualification of handling environment. This paper focus on the dynamic behavior of module and carries out a series of computer simulation using LS-DYNA program. Comparing with test results previously performed, dynamic characteristics of TFT-LCD module are estimated.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.637-644
• /
• 2008

Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.105-109
• /
• 2019

LED lighting is used as artificial lighting for plant growth because it has high light efficiency and can radiate light of various wavelengths. In this paper, we have developed new structure LED lighting module to improve the performance of LED lighting for plant growth and proposed a lighting control system that can be controlled wirelessly. The proposed LED lighting module was fabricated using optical lens applied to tunnel light and simulated using Relux program. Results of simulation, we confirmed that the light distribution and average illuminance of the proposed lighting were improved. LED lighting control system was developed to wirelessly control R, G, B, W LED lighting according to plant type and growing season. Therefore, it is expected to provide the optimal lighting environment for plant growth and contribute to the improvement of farm productivity and convenience.

• KSCI Review
• /
• v.14 no.1
• /
• pp.213-219
• /
• 2006

We need the customized e-Learning service according to not only developing the wireless mobile and hardware technology, also developing the multimedia process skills. Especially, the beginner who start to learn the first programming course must be provided the personalized learning. The beginner require the repeated practices to obtain the programming skills, also they reveal the different learning effects following the learner capability In this paper. we develop a new e-Learning contents which give the individual service for learner and show the simulation which is program execution to maximize the learning effects.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.3
• /
• pp.241-249
• /
• 2004

A parametric study on the scroll wrap configuration factors of a $CO_2$scroll compressor for heat pump water heater has been carried out. Since there are 7 scroll wrap design parameters and 5 equations relating them, two of the design parameters can be selected as independent parameters. In this study, the wrap thickness and orbiting radius are chosen as independent ones. Computer simulation program has been used to estimate the compressor performance at various combinations of the scroll wrap design parameters. It has been found that there exists optimum combination of the wrap parameters for the highest compressor performance over analyzed ranges of the design parameters.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.131-137
• /
• 2021

The Angle-of-Arrival (AOA) estimation in real time is one of core technologies for the real-time tracking system, such as a radar or a satellite. Although AOA estimation algorithms for various antenna types have been studied, most of them are for the single-shaped array antenna suitable to the specific frequency. In this paper, we propose the cascade AOA estimation algorithm for the combined array antenna with Uniform Rectangular Frame Array (URFA) and Uniform Circular Array (UCA), with the excellent performance for various frequencies. The proposed technique is consisted of Capon for roughly finding AOA groups with multiple signal AOAs and Beamspace Multiple Signal Classification (MUSIC) for estimating the detailed signal AOA in the AOA group, for the combined array antenna. In addition, we provide computer simulation results for verifying the estimation performance of the proposed algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.857-860
• /
• 2021

The 21st century society has entered the fourth industrial society of machine to machine from the information society of human to machine. Accordingly, countries around the world are always operating efficient crisis management systems that can quickly respond to disasters or crises. As cyber attacks such as cyber warfare are actually progressing, countries around the world are conducting defense training in response to cyber attacks, and reflecting the results of simulation attacks in improving or building security systems. In this paper, we would like to consider the future cyber training development guide by comparing and analyzing the trends of cyber training in domestic and foreign countries.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.235-240
• /
• 1998

A procedure for the optimal design of high quality rectifiers is introduced in this paper. The procedure is capable of producing different optimal designs for the same rectifier based on the objective performance required from that rectifier. A FORTRAN-based computer system designed to solve large-scale optimization problems was used in this work to obtain the optimal designs. The optimization program uses Wolfe algorithm in conjunction with a quasi-Newton algorithm as well as a projected augmented Lagrangian algorithm to solve the highly nonlinear optimization problem. The paper also introduces a detailed analysis and an application of the procedure on a boost-type zero-current switch (ZCS) single-switch three-phase rectifier introduced recently in the literature. The obtained results are compared with popular simulation packages (i. e. PSPICE and SIMCAD) to support the validity of the proposed concept.