Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Runout Modeling and Measurement Method in 4-flutes End Milling

4날 엔드밀 가공시 런아웃 모델링과 측정 방법

  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Runout causes severe differences among cutting force waveforms due to changes of rotational radii. Thus a runout model must be included in a cutting force model to simulate cutting force accurately. In this paper, a runout modeling method and a measurement method using a dialgauge were developed, which were easy to apply. To calculate runout parameters, a computer program algorithm which obtained runout parameters from measurement values was developed. Cutting force waveforms simulated from cutting force model considering runout effect and measured from experiments had good agreements for their wave size and order.

Keywords

References

  1. Kuang-Hug Fuh, 'A Predicted Milling Force Model for High-speed End Milling Operation', International Journal of Machine Tools&Manufacturing, Vol. 37, pp. 969-979, 1997 https://doi.org/10.1016/S0890-6955(96)00083-1
  2. Bayoumi A. E., 'An Analytic Mechanistic Cutting Force Model for Milling Operations,' ASME Journal of Engineering for Industry, Vol. 116, pp. 324-330, 1994 https://doi.org/10.1115/1.2901948
  3. Lee Young-Moon, 'Effect of Cutter Runout on End Milling Precess,' Journal of the KSPE, Vol. 19, No. 8, pp. 63-70, 2002
  4. Ko Jeong Hoon, 'Development of a Virtual Machining System:Approximation of the Size Effect for Cutting Force Prediction', International Journal of Machine Tools & Manufacturing, Vol. 42, pp. 1595-1605, 2002 https://doi.org/10.1016/S0890-6955(02)00137-2
  5. Zheng H.Q., 'Theoretical Modeling and Simulation of Cutting Forces in Face Milling With Cutter Runout,' International Journal of Machine Tools & Manufacturing, Vol. 39, pp. 2003-2018, 1999 https://doi.org/10.1016/S0890-6955(99)00023-1
  6. Wang J.J.J., 'Identification of Cutter Offset in End Milling without a Prior Knowledge of Cutting Coefficients,' International Journal of Machine Tools & Manufacturing, Vol. 43, pp. 687-697, 2003 https://doi.org/10.1016/S0890-6955(03)00028-2
  7. Keith A.Hekman, 'In-Process Monitoring of End Milling Cutter Runout', Mechatronics, Vol. 7, No. 1, pp. 1-10, 1997 https://doi.org/10.1016/S0957-4158(96)00038-4
  8. Tlusty J., 'Dynamics of Cutting Forces in End Milling,' Annals of the CIRP, Vol. 44, pp. 21-25, 1975
  9. Tlusty J., 'An Overview of Modeling and Simulation of the Milling Process,' ASME Journal of Engineering for Industry, Vol. 113, pp. 169-175, 1991 https://doi.org/10.1115/1.2899674