• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.656-659
• /
• 2005

Hot water extracts of Angelica keiskei aerial parts were solvent-fractionated with ethyl acetate (EtOAc) and buffers (5% $NaHCO_3$, pH 8.0; 1.0 N HCl, pH 3.0) to obtain EtOAc-soluble acidic and neutral fractions. EtOAc-soluble neutral fraction was purified by Sephadex LH-20 column chromatography and reverse phase HPLC. Assay for purification of antioxidative compounds was performed by spraying DPPH solution on thin layer chromatography. Two isolated substances were identified as pseudoisopsoralen and 8-methoxypsoralen(xanthotoxin) by FAB-MS and NMR analyses.

• KSBB Journal
• /
• v.18 no.4
• /
• pp.289-293
• /
• 2003

Doxorubicin is an anthracycline-family polyketide compound with a very potent anti-cancer activity, typically produced by Streptomyces peucetius. In order to increase doxurubicin productivity, a semi-industrial doxorubicin-producing Streptomyces strain named BR-Dox was cultured in a R2YE liquid medium containing CaCO$_3$, and then converted to a cell wall-free protoplast using lysozyme treatment method, followed by PEG-mediated cell wall regeneration. Among several protoplast-regenerated Streptomyces BR-Dox strains, two independent isolates named BR-Dox4 and BR-Dox6 were visually selected using thin layer chromatography (TLC) based on the pigment overproducing phenotype. Comparing with Streptomyces BR-Dox parental strain, two protoplast-regenerated strains, BR-Dox4 and BR-Dox6 exhibited 25.2％ and 12.2％ higher doxorubicin productivity analyzed by high pressure liquid chromatography (HPLC), respectively. This result suggests that a protoplast-regeneration of an antibiotics-producing Streptomyces strain should be a promising strain development approach for antibiotics overproduction in Streptomyces species.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1654-1659
• /
• 2014

Tunneling field-effect transistors (TFETs) are very applicable to low standby-power application by their virtues of low off-current ($I_{off}$) and small subthreshold swing (S). However, low on-current ($I_{on}$) of silicon-based TFETs has been pointed out as a drawback. To improve $I_{on}$ of TFET, a gate-all-around (GAA) TFET based on III-V compound semiconductor with InAs/InGaAs/InP multiple-heterojunction structure is proposed and investigated. Its performances have been evaluated with the gallium (Ga) composition (x) for $In_{1-x}Ga_xAs$ in the channel region. According to the simulation results for $I_{on}$, $I_{off}$, S, and on/off current ratio ($I_{on}/I_{off}$), the device adopting $In_{0.53}Ga_{0.47}As$ channel showed the optimum direct-current (DC) performance, as a result of controlling the Ga fraction. By introducing an n-type InGaAs thin layer near the source end, improved DC characteristics and radio-frequency (RF) performances were obtained due to boosted band-to-band (BTB) tunneling efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.176-176
• /
• 2007

Flat-panel direct conversion detectors used in compound substance of semiconductor are being studied for digital x-ray imaging. Recently, such detectors are deposited by physical vapor deposition(PVD) generally. But, most of materials (HgI2, PbI2, TlBr, PbO) deposited by PVD have shown difficult fabrication and instability for large area x-ray imaging. Consequently, in this paper, we propose applicable potentialities for screen printing method that is coated on a substrate easily. It is compared to electrical properties among semiconductors such as $HgI_2$, $PbI_2$, PbO, HgBrI, InI, and $TlPbI_3$ under investigation for direct conversion detectors. Each film detector consists of an ~25 to $35\;{\mu}m$ thick layer of semiconductor and was coated onto the substrate. Substrates of $2cm{\times}2cm$ have been used to evaluate performance of semiconductor radiation detectors. Dark current, sensitivity and physics properties were measured. Leakage current of $HgI_2$ as low as $9pA/mm^2$ at the operation bias voltage of ${\sim}1V/{\mu}m$ was observed. Such a value is not better than PVD process, but it is easy to be fabricated in high quality for large area x-ray Imaging. Our future efforts will concentrate on optimization of growth of film thickness that is coated onto a-Si TFT array.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.285-285
• /
• 2013

Recently, hexagonal boron nitride (h-BN), which is III-V compound of boron and nitride by strong covalent sp2 bonds has gained great interests as a 2 dimensional insulating material since it has honeycomb structure with like graphene with very small lattice mismatch (1.7%). Unlike graphene that is semi-metallic, h-BN has large band gap up to 6 eV while providing outstanding properties such as high thermal conductivity, mechanical strength, and good chemical stability. Because of these excellent properties, hBN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Low pressure and atmospheric pressure chemical vapor deposition (LPCVD and APCVD) methods have been investigated to synthesize h-BN by using ammonia borane as a precursor. Ammonia borane decomposes to polyiminoborane (BHNH), hydrogen, and borazine. The produced borazine gas is a key material that is a used for the synthesis of h-BN, therefore controlling the condition of decomposed products from ammonia borane is very important. In this paper, we optimize the decomposition of ammonia borane by investigating temperature, amount of precursor, and other parameters to fabricate high quality monolayer h-BN. Synthesized h-BN is characterized by Raman spectroscopy and its absorbance is measured with UV spectrophotometer. Topological variations of the samples are analyzed by atomic force microscopy. Scanning electron microscopy and Scanning transmission Electron microscopy are used for imaging and analysis of structures and surface morphologies.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.422-429
• /
• 1992

The morphology and adhesion properties of rubber compounds containing resorcinol formaldehyde(RF) resin and hexamethoxymethylmelamine(HMMM) used in adhesion of rubber to brass-plated steel cord was investigated. The resins were spherical particles about $2000{\AA}$ diameter and distributed in rubber compounds homogeneously, and the cured compound with steel cord showed migration of resin to steel cord. Also, modulus was increased with increasing HMMM contents. The loss of adhesion between rubber and steel cord was likely to be at initial stages by thermal aging. Considering the physical properties, suability of adhesion layer and thermal aging property, optimum ratio of RF resin and HMMM was 1 : 0.9.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.410-417
• /
• 1999

Antimicrobial activity of Plantain(Plantago asiatica L.) was investigated. Methanol extract of dried Plantain was fractionated to hexane, chloroform, ethylacetate, butanol and aqueous fraction. Ethylacetate fraction among these fractions showed the highest inhibitory effect on the microorganisms such as B. subtilis, E. coli, and V. parahaemolyticus at 500 $\mu\textrm{g}$/disc. Ethylacetate fraction was further fractionated into 8 fractions by silica gel column and thin layer chromatography(TLC). The results showed that ethylacetate fractions No. 2 and 3 had the highest anti-microbial activity. They were mixed again, re-separated, and seven fractions were obtained. Among them, No.4 and 6 fraction had the highest inhibitory effect on the microorganisms, which were then separated into four fractions. In the 3rd fractionation, No.4 fraction was identified as hexadecanoic acid by HPLC, $^1$H-NMR and GC-MS.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1511-1516
• /
• 2007

To assess a potential possibility of Eucommia ulmoides (EU) as a functional food, anti-hypertensive materials of EU were isolated by silica gel column, thin layer and reverse phase column chromatographies, and then ACE (angiotensin-converting emzyme) inhibitory activities of different parts (leaf, bark, and stem) were investigated. The isolated compound, 8A, was pinoresinol-4,4'-di-O-${\beta}$-D-glucoside (below PDG) originating from Eucommial Cortex and its purity was 95.64%. Of all the samples tested, PDG in raw bark and roasted bark was the highest level at 135.13 mg% and 163.67 mg%, respectively. In ACE inhibitory activity at 10 mg/mL of EU extracts, roasted leaf, raw bark, and roasted bark were 77.56%, 75.73%, and 75.73%, respectively. ACE activities at 1 mg/mL were shown to be 91.87% for PDG, 97.06% for $Enalapril^{(R)}$, and 90.32% for $Captopril^{(R)}$.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1035-1040
• /
• 2010

The research efforts on GaN-based light-emitting diodes (LEDs) keep increasing due to their significant impact on the illumination industry. Surface mount technology (SMT) is widely used to mount the LED packages for practical application. In surface mount soldering both the device body and leads are intentionally heated by a reflow process. We studied on the effects of multiple reflows on microstructural variation and joint strength of the solder joints between the LED package and the substrate. In this study, Pb-free Sn-3.0Ag-0.5Cu solder and a finished pad with organic solderability preservatives (OSP) were employed. A $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed during the multiple reflows, and the thickness of the IMC layerincreased with an increasing number of reflows. The shear force decreased after three reflows. From the observation of the fracture surface after a shear test, partially brittle fractures were observed after five reflows.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.210-218
• /
• 2019

Batch experiment studies were carried out on the adsorption of the major tar compound, 2-picoline, derived from the plant cell cultures of Taxus chinensis, using Sylopute while varying parameters such as initial 2-picoline concentration, contact time and adsorption temperature. The experimental data were fitted to the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. Comparison of results revealed that the Langmuir isotherm model could account for the adsorption isotherm data with the highest accuracy among the four isotherm models considered. From the analysis of adsorption isotherms, it was found that adsorption capacity decreased with increasing temperature and the adsorption of 2-picoline onto Sylopute was favorable. The kinetic data were well described by the pseudo-second-order kinetic model, while intraparticle diffusion and boundary layer diffusion did not play a dominated role in 2-picoline adsorption according to the intraparticle diffusion model. Thermodynamic parameters revealed the exothermic, irreversible and non-spontaneous nature of adsorption. The isosteric heat of adsorption decreased as surface loading ($q_e$) increased, indicating a heterogeneous surface.