• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.205-212
• /
• 2002

The growth characteristics of metal-organic chemical vapor deposition (MOCVD) $Pb(Zr_xTi_{1-x})O_3 (PZT) thin films were investigated for the application of high-density ferroelectric random access memories (FRAM) devices beyond 64Mbit density. The supply control of Pb precursor plays the most critical role in order to achieve a reliable process for PZT thin film deposition. We have monitored the changes in the microstructure and electrical properties of films on increasing the Pb precursor supply into the reaction chamber. Under optimized conditions, $Ir/IrO_2/PZT(100nm)/Ir capacitor shows well-saturated hysteresis loops with a remanent polarization (Pr) of $~28{\mu}C/textrm{cm}^2$ and coercive voltage of 0.8V at 2.5V. Other issues such as step coverage, compositional uniformity and low temperature deposition was discussed in viewpoint of actual device application.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1177-1185
• /
• 1996

Y-TZP/Ce-TZP ceramics having relative sintered densities of>95% average grain sizes of 0.36$\mu\textrm{m}$ microhar-dness of 1150 kg/mm2 fracture strength of 390-830 MPa and toughness of 6.4-10.2 MPa$.$mm1/2 were prepared by conventional sintering of 3 mol% Y2O3-ZrO2 and 12 mol% CeO2-ZrO2 powders at 1400 and 1500$^{\circ}C$ The average grain sizes of Y-TZP/Ce-TZP ceramics were mainly governed by those of Ce-TZP. White increasing Ce-TZP content toughness increased while microhardness and fracture strength decreased. With comparing microhardness and toughness fracture strength was more sensitive on not only grain size but also other factors such as microstructural and compositional variations. The densification of Y-TZP/Ce-TZP cermaics was not greatly affected by composition and soaking time at temperature over 1400$^{\circ}C$ With increasing CE-TZP content the stability of t-ZrO2 decreased under thermal aging in air whereas increased in hydrothermal atmosphere and aqueous solution.

• The Korean Journal of Ecology
• /
• 제23권6호
• /
• pp.439-444
• /
• 2000

Forest vegetation in Mt. Jangan County Park, Jeonlabuk-Do, Korea, was investigated by classification and ordination methods. By the cluster analysis (classification) method, nine groups were recognized as follows : Quercus serrata community, Quercus serrata- Carpinus laxiflora community, Cornus controversa community, Fraxinus mandshurica community, Carpinus laxiflora community, Quereus variabilis community, Quercus mongolica - Sasa borealis community. Quercus mongolica - Symplocos chinensis for. pilosa community and Quercus mongolica - Rhododendron schlippenbachii community. These groups showed differences in species composition and environmental characteristics, but Quercus mongolica - Sasa borealis community, Quercus mongolica - Symplocos chinensis for. pilosa community and Quercus mongolica - Rhododendron schlippenbachii community among them showed very similar floristic composition to each other. The interrelationship between the floristic composition of the vegetation and environmental factors was analysed by principal component analysis (PCA). Quercus mongolica community was distributed at a high altitude (900～1200 m above sea level). Fraxinus mandshurica community and Cornus controversa community were differentiated from the other communities with high contents of soil moisture and pH. On the other hand, Carpinus laxiflora community and Quercus variabilis community were distributed at places with adequate levels of soil moisture, soil organic matter. and at low altitude. In this study, the altitude and soil moisture were the main factors determining the forest vegetation. They were strongly correlated with the dominant compositional gradient at the localities examined.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.588-597
• /
• 2007

Low-fat ground pork patties, LFGPP (<10% total fat) formulated with 0.1, 0.2 and 0.3 percent sodium alginate (SA) were processed and compositional, processing and sensory characteristics were compared with control patties containing 20% fat. The moisture content of raw and cooked LFGPP were significantly (p<0.05) higher than control patties because of greater amount of added water in the formulation. The cooking yield, moisture and fat retention also increased linearly in different treatments of LFGPP. The dimensional parameters such as gain in height, decrease in diameter and shrinkage were significantly (p<0.05) lower in LFGPP in comparison to control. Amongst the sensory attributes, flavour showed a declining trend with the increase in concentration of SA in LFGPP. However, low-fat patties with 0.1% SA rated similar to high-fat control. The lipid profile revealed 49.78 and 43.22% decrease in total lipids and cholesterol content respectively, compared to control. The calorie content was reduced significantly (p<0.05) in LFGPP. The texture profile of LFGPP with 0.1% SA was similar to that of high-fat control. The LFGPP remained stable without any appreciable loss of physico-chemical, microbiological and organoleptic quality during refrigerated storage ($4{{\pm}}1^{\circ}C$) for 21 and 35 days in aerobic and vacuum packaging respectively.

• 한국주조공학회지
• /
• 제30권4호
• /
• pp.130-136
• /
• 2010

Sulfide segregation behavior, characteristics of solidification microstructure and compositional distribution in the riser/castings junction of heavy-section main bearing support (MBS) steel castings were investigated; Sulfide streaks of A segregation were formed in the transitional region from columnar grain to coarse equiaxed grain and floated with aggregation of the dendritic free crystal. Solute segregation behaviors of elements Si, P and S were V shape negative segregation from the bottom of the castings to upper part of the riser with the reference of vertical center-line of the specimen block. Those of elements C and Mn were V shape negative segregation in the main body and A shape positive segregation in the riser of the casting. Just beneath the pipe shrinkage in the riser segregation ratio of each element was the highest, and that of S was 3.6 times higher, C 3.3 times, P 2.1 times, Si 1.6 times and Mn 1.0 times respectively. [Mn/S] ratio of the specimen block was distributed in the wide range of 20~275.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.104-109
• /
• 2007

Photochemical patterning of self-assembled mono layers (SAMs) has been performed by diode pumped solid state (DPSS) 3rd harmonic Nd:$YVO_4$ laser with wavelength of 355 nm. SAMs patternings of parallel lines have subsequently been used either to generate compositional chemical patterns or fabricate microstructures by a wet etching. This paper describes a selective etching process with patterned SAMs of alkanetiolate molecules on the surface of gold. SAMs formed by the adsorption of alkanethiols onto gold substrate employs as very thin photoresists. In this paper, the influence of the interaction between the functional group of SAMs and the etching solution is studied with optimal laser irradiation conditions. The results show that hydrophobic functional groups of SAMs are more effective for selective chemical etching than the hydrophilic ones.

• 한국산업융합학회 논문집
• /
• 제11권3호
• /
• pp.141-148
• /
• 2008

Most of the recent studies on Seowon have been done just in terms of classification of general kinds of building layout, so there are a few things ignored such as the way they were arranged, the compositional process of buildings etc.. Although the classification of types itself is meaningful in the study on Korean traditional architecture, there has been some limitation in deep analysis of each style. The aim of this study is to find out the characteristics of the building layout and space composition of Dodong-Seowon with the viewpoint of the process of changes of it during the time through the survey and analysis on both the existing site layout and the measuring unite of scale applied to the original construction of each building. Hierarchical order scheme was considered in the design of the space proceeding from the entrance to the main space and of the building position, axis and the roof heights of buildings.

• 자원환경지질
• /
• 제26권2호
• /
• pp.135-143
• /
• 1993

Chemical compositions of sphalerites from 25 gold and/or silver deposits in central Korea were obtained with an electron probe microanalyzer. The FeS contents of sphalerites depend generally upon the assemblage of associated iron sulphides (pyrite and/or pyrrhotite) especially. The sphalerites coexisting with pyrrhotite show a narrow range of FeS variation, but the sphalerites associated with pyrite and/or pyrrhotite have the variable and wide range of FeS contents. The sphalerites from Au-dominant deposits, which vary considerably in each deposit, are generally characterized by high CdS content and low MnS content. On the contrary, the sphalerites from Ag-dominant and Au-Ag deposits tend to be characterized by relatively high MnS and very low CdS content. Based upon the mineralogy, fluid inclusions and stable isotope data, the Au-dominant deposits were formed under higher temperature and deeper depth than the Ag-dominant and Au-Ag deposits. The results suggest the possibility that the diverse sources and evolution of ore fluid at the time of ore deposition are responsible for the deposition of Cd and Mn components in sphalerites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1181-1182
• /
• 2006

The solar power system comprises a solar battery that directly converts light energy to electrical energy with a photovoltaic effect and a power converter system, that is, inverter that converts direct current power, which is generated from solar battery to common alternating current. In this paper, database was constituted through remote monitoring supervision measurement for the long-time positive operation of 3kW solar power system installed within the solar energy positive research complex of Chosun University. As a result of analyzing the reduction of the efficiency of solar battery and inverter that are compositional components of PV system through an analysis on the acquired data, the PV output was proven over 65% of the total output when insolation intensity exceeded 600W/m2 in 2005, and the array conversion efficiency dropped much more than rating; meanwhile, insolation intensity dropped below 600W/m2. Therefore, it has been demonstrated that approximately 35% of the entire amount of PV output operated under the condition that the inverter efficiency rate dropped rapidly by 60 to 70%.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.48-54
• /
• 2000

The corrosion properties of Ni-Cr-W-Mo-B alloy sprayed by the high velocity oxy-fuel spraying (HVOF) was studied as a function of heat treatment by using both potentiodynamic polarization and immersion tests in the H₂SO₄ solution. The mechanical property was also evaluated by a microhardness tester. Microstructural characteristics of te as-sprayed and annealed coatings at 550, 750 and 950℃ have been analyzed by means of OM, XRD, SEM and TEM. The results showed that the corrosion resistance was improved by increasing the annealing temperature. As-sprayed coating had metastable and heterogeneous phases such as amorphous, nanocrystalline and very refined grain and precipitates, which induced a localized corrosion. The localized corrosion occurred preferentially at the unmelted particles which were composed of Ni matrix and Cr, W and Mo riched phase segregated in the boundaries. As annealing temperature was increased, the microstructure had shown some changes - reduction of porosity and s[plat boundary decomposition and crystallization of amorphous/nanocrystalline phases, grain coarsening,, formation and growth of precipitates such as {TEX}$M_{23}C_{6}${/TEX} and {TEX}$M_{7}C_{3}${/TEX}. In addition, the compositional difference between matrix and boundary phases gradually disappeared, which changed the corrosion type from localized corrosion to general corrosion and thus enhanced corrosion resistance.