• 한국지진공학회논문집
• /
• 제10권6호
• /
• pp.137-145
• /
• 2006

최근 건설기술이 발달함에 따라 점차적으로 더욱 높은 정확성과 신뢰성을 바탕으로 구조물의 상태를 파악 또는 예측 할 수 있는 기술적인 체제가 요구되고 있는 시점에서, 광섬유센서는 내구성과 높은 분해능, 전자기파 노이즈 저항성, 절대값의 측정, 다중화 등의 가지고 있는 여러 장점 때문에 미국 등 선진국의 경우 교량, 터널 그리고 건물 등에 변위와 변형률 측정에 많은 설치가 진행되어 왔고, 광섬유 센서를 이용한 시스템이 구조물의 안정성과 잔존수명을 판단하는 기준으로 중요한 역할을 할 것으로 기대되고 있다. 본 논문에서는 이러한 광섬유센서 중에서 일반적으로 가장 많이 사용하고 있는 광섬유격자 센서의 응용의 폭을 확대하기 위하여 여러 가지 응용분야에 적용하고자 하였으며, 특히 전단응력이 많이 걸려 foil형 스트레인 게이지를 사용하기 어려운 보 기둥 접합부에 적용하여 광섬유격자 센서가 일반적으로 사용되는 전자식 변위 센서들과 정밀도가 대단히 차이가 나고 있음을 보여주고 있고, 복합재료와 콘크리트 접합 구조물에 적용하여 흔히 발생하는 결함인 delamination을 측정하는데 광섬유격자 센서가 유효적절함을 보여주고 있으며, 원자력발전소 격납구조물과 같은 대형구조물에 적용하여 변위를 측정함에 있어서 광섬유격자 센서가 시공도 용이하고 데이터도 양호함을 보여 주고 있어, 기존의 어떤 구조물도 광섬유센서를 적용하여 쉽게 광섬유 스마트구조물화 할 수 있음을 보여준다.

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• 폴리머
• /
• 제33권1호
• /
• pp.39-44
• /
• 2009

폴리페닐렌에테르[PPE, poly(phenylene ether)]를 기저수지로 사용하고, 가교제로 N,N'-m-phenylene-dimaleimide(PDMI), 난연제로 decabromodiphenylethane을 첨가하여 고분자 기판을 제작하였으며, 가교제와 난연제가 기판소재의 유전특성 등 물리적 특성에 미치는 영향을 고찰하였다. 개시제의 유무에 따른 PDMI의 열경화 특성을 DSC를 이용하여 분석하였으며, 이를 바탕으로 PPE-PDMI 테스트 조성을 설계하였다. 복합물 시트를 필름 코터로 성형한 후, 진공가압적층하여 테스트 기판을 제작하고, FDMI와 난연제의 함량에 따른 유전율, 유전손실, peel 강도, 납 내열성 및 난연성을 평가하였다. 유전율과 유전손실은 PDMI와 난연제의 함량에 따라 대체로 증가하는 경향을 나타내었으나, 납 내열성과 난연성은 개선된 결과를 나타내었다. Peel 강도는 PDMI가 10 wt% 이상 첨가되면 1 kN/m 이상의 높은 값을 나타내었지만, 난연제의 첨가량에 따라서는 소폭 감소하는 경향을 보였다. Gel content 측정결과로부터, PPE-PDMI의 반응 메카니즘은 semi-IPN 구조의 형성보다는 PPE와 PDMI의 crosslinking에 의한 망상구조 형성에 더 가까운 것으로 판단되었다. 최종적으로 1 GHz에서 유전율이 2.52$\sim$2.65, 유전손실이 0.002 미만으로 작은 고주파 대역용 고분자 복합체 기판소재를 얻을 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.385-400
• /
• 2004

The Lago Sofia Conglomerate encased in the 2km thick hemipelagic mudstones and thinbedded turbidites of the Cretaceous Cerro Toro Formation, southern Chile, is a deposit of a gigantic submarine channel developed along a foredeep trough. It is hundreds of meters thick kilometers wide, and extends for more than 120km from north to south, representing one of the largest ancient submarine channels in the world. The channel deposits consist of four major facies, including stratified conglomerates (Facies A), massive or graded conglomerates (Facies B), normally graded conglomerates with intraformational megaclasts (Facies C), and thick-bedded massive sandstones (Facies D). Conglomerates of Facies A and B show laterally inclined stratification, foreset stratification, and hollow-fill structures, reminiscent of terrestrial fluvial deposits and are suggestive of highly competent gravelly turbidity currents. Facies C conglomerates are interpreted as deposits of composite or multiphase debris flows associated with preceding hyperconcentrated flows. Facies D sandstones indicate rapidly dissipating, sand-rich turbidity currents. The Lago Sofia Conglomerate occurs as isolated channel-fill bodies in the northern part of the study area, generally less than 100m thick, composed mainly of Facies C conglomerates and intercalated between much thicker fine-grained deposits. Paleocurrent data indicate sediment transport to the east and southeast. They are interpreted to represent tributaries of a larger submarine channel system, which joined to form a trunk channel to the south. The conglomerate in the southern part is more than 300 m thick, composed of subequal proportions of Facies A, B, and C conglomerates, and overlain by hundreds of m-thick turbidite sandstones (Facies D) with scarce intervening fine-grained deposits. It is interpreted as vertically stacked and interconnected channel bodies formed by a trunk channel confined along the axis of the foredeep trough. The channel bodies in the southern part are classified into 5 architectural elements on the basis of large-scale bed geometry and sedimentary facies: (1) stacked sheets, indicative of bedload deposition by turbidity currents and typical of broad gravel bars in terrestrial gravelly braided rivers, (2) laterally-inclined strata, suggestive of lateral accretion with respect to paleocurrent direction and related to spiral flows in curved channel segments around bars, (3) foreset strata, interpreted as the deposits of targe gravel dunes that have migrated downstream under quasi-steady turbidity currents, (4) hollow fills, which are filling thalwegs, minor channels, and local scours, and (5) mass-flow deposits of Facies C. The stacked sheets, laterally inclined strata, and hollow fills are laterally transitional to one another, reflecting juxtaposed geomorphic units of deep-sea channel systems. It is noticeable that the channel bodies in the southern part are of feet stacked toward the east, indicating eastward migration of the channel thalwegs. The laterally inclined strata also dip dominantly to the east. These features suggest that the trunk channel of the Lago Sofia submarine channel system gradually migrated eastward. The eastward channel migration is Interpreted to be due to tectonic forcing imposed by the subduction of an oceanic plate beneath the Andean Cordillera just to the west of the Lago Sofia submarine channel.

• Composites Research
• /
• 제31권5호
• /
• pp.177-185
• /
• 2018

섬유금속적층판은 금속과 섬유 강화 복합소재를 함께 적층한 하이브리드 재료 중 하나다. 섬유금속적층판은 계면의 접착층이 파괴되는 층간분리 현상이 발생할 수 있기 때문에 계면의 접착층에 대한 한계응력과 에너지 해방률을 실험적으로 도출해야만 한다. 하지만, 온도에 따른 에너지 해방률을 실험적으로 도출하는 과정에서 측정 장비의 사용 온도에 대한 제약을 받는다. 따라서, 본 연구에서는 Levenberg-Marquardt 기법을 기반한 역해석 기법을 사용하여 접착층에 대한 모드 I 한계응력과 에너지 해방률에 대한 예측 가능성을 확인하는 것이 목표다. 먼저, 한계응력은 접착층의 인장강도와 같다고 가정하였으며, 에너지 해방률은 DCB 시험(double cantilever beam test)을 수행하여 정의하였다. 또한, 유한요소법 기반 모델을 적용하여 한계응력과 에너지 해방률을 수치해석적으로 예측할 수 있는 지 확인하였다. 그 후, Levenberg-Marquardt 기법을 유한요소법 기반 모델에 적용하여 모드 I 한계응력과 에너지 해방률을 수치해석적으로 예측하였다. 아울러, 본 연구에서 사용한 역해석 기법의 수렴성을 확보하기 위하여 두 가지 경우의 초기 매개변수에 대한 역해석을 추가적으로 수행하였다. 결과적으로, 본 연구에서 사용한 역해석 기법은 모드 I 한계응력과 에너지 해방률을 효과적으로 예측할 수 있음을 보였다.

• Composites Research
• /
• 제26권1호
• /
• pp.14-20
• /
• 2013

CNT를 포함하는 전기방사된 PVDF를 작동기 제조의 소재로 사용하였다. 기계적, 전기적특성과 함께 작동기 성능을 평가하기 위해 전기화학적 환경 내에서 전기화학 및 작동기 거동을 조사하였다. 전기방사된 시트의 특징 중 하나인 유연함을 가지며 분산이 잘 되어 접촉면이 많은 이점이 있기 때문에 작동기 제작방법으로 적합하다고 생각되었다. 전기방사는 여러 가지 요인들로 방사형태가 각각 다르게 나타났다. 본 연구에서는 콜렉터를 드럼형태를 사용하여 방사된 나노섬유의 방향성을 가지게 하였으며 형태를 확인하기 위해 전자현미경을 통해 나노섬유가 정렬된 형상을 확인하였다. 전자침 X-ray 미세분석기를 사용하여 PVDF내에 CNT가 함침 되어 나노섬유가 정렬 된 상태를 확인하였으며, 이러한 형태가 미치는 기계적, 전기적 물성에 영향을 평가하기 위해 인장시험을 통해 인장강도와 전기 저항도를 측정하였다. 정렬된 방향의 나노섬유 시트가 정렬의 직각 방향의 시트보다 상대적으로 기계적 그리고 전기적 물성이 좋게 나타났다. 전기방사된 CNT/PVDF 나노섬유 시트가 작동기로 사용 되었을 때 캐스팅으로 제작된 PVDF 시트의 작동기보다 좋은 효율을 확인하기 위해 전기화학적 환경 내에서 작동기 시험을 진행하여, 작동기 효율과 전기적 용량을 측정하였다. 전기방사된 CNT/PVDF 나노섬유 시트는 CNT와 PVDF간의 접촉면이 많기 때문에, 우수한 작동성을 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권6호
• /
• pp.153-161
• /
• 2010

1970년대에 콘크리트를 기반으로 지어진 많은 구조물과 빌딩은 안전성과 사용성을 고려하여 무수히 많은 연구를 현재까지 진행해 왔으나, 설계강도 보다 낮은 최대강도를 보이고 있다. 현재 노후화된 콘크리트 구조물들에 대한 다양한 보수 보강 공법이 개발되어 적용되고 있지만 기존 연구들은 구조물의 특성에 대해서는 고려하지 않고, 단지 기존 부재와 보수 재료의 부착에 관한 연구와 기존 부재를 효과적으로 보강하기 위한 새로운 방법을 개발하는 연구는 미흡한 실정이다. 따라서 본 연구는 보수 보강 재료를 이용한 효율적인 강도증진 방법에 대한 연구, 보강 재료와 기존 부재 사이의 거동에 대해 부족했던 연구를 보완하고자 한다. 또한 고강도 콘크리트는 높은 압축강도를 발현하기 때문에 부재의 단면을 축소시킬 뿐만 아니라 구조물의 자중 또한 감소시킬 수 있으므로 거대한 구조물 건설에 사용되고 있다. 고강도 콘크리트의 사용이 점차 증가하는 추세이지만 고강도 콘크리트를 이용한 구조물의 보수 보강에 대한 방법 연구 역시 미진한 실정이다. 따라서 본 연구에서는 효과적인 고강도 콘크리트 기둥에 대한 보수 보강 방법을 개발하고자 한다. 본 연구에서는 사각단명 형상을 가진 기둥을 팔각단면으로 형상 변형을 통해 CFS로 보수 보강하여 단면 형상이 변함에 따른 효과를 파악하고, CFS로 보강된 고강도 콘크리트(HSC) 기둥의 강도 증대 효과와 파괴 거동에 대해 파악하고자 한다.

• Corrosion Science and Technology
• /
• 제9권4호
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• 폴리머
• /
• 제36권2호
• /
• pp.124-130
• /
• 2012

본 연구의 목적은 전기방사법을 사용하여 poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL)과 marine collagen (MC)이 혼합된 나노섬유를 제조하는 것이다. 전기방사된 나노섬유의 직경과 형태는 여러 공정 변수에 의해서 변화되는데, PLCL과 MC의 혼합비, 노즐과 콜렉터와의 거리, 노즐의 직경, 용액의 방출 속도 그리고 전기장의 세기 변화에 따라 나노파이버의 직경을 주사전자현미경을 통해서 분석하였다. 또한 제조된 나노파이버의 표면변화를 확인하기 위해 물과의 접촉각을 측정하였으며, 나노파이버의 세포 친화성을 평가하기 위해 MG-63을 이용하여 생존율과 흡착형태를 주사전자현미경과 형광현미경을 통해서 관찰하였다. 이와 같은 연구 결과, 방사거리, MC의 함량, 전기장의 세기가 증가할수록 제조된 나노파이버의 평균직경은 감소하는 경향을 나타냈다. 또한 MC의 함량이 증가할수록 나노파이버의 친수성이 증가하였고 세포독성은 관찰되지 않았다. 이에 따라 해양유래 생물에서 추출한 콜라겐은 조직공학용 소재에 새롭게 사용될 수 있을 것으로 예상된다.