• 대한치과교정학회지
• /
• 제34권4호
• /
• pp.351-362
• /
• 2004

고정식 교정 치료시 교정용 밴드가 장착된 치아의 치주조직 손상은 접착된 치아에서 보다 자주 발생한다. 일반 치과치료에 사용되는 시멘트는 세포독성을 지닌 것으로 알려져 있으므로 치주조직과 직접 접촉하거나 구강 내에서 밴드시멘트의 성분들이 용출되는 교정용 밴드 시멘트는 치주조직의 손상을 일으키는 원인이 될 수 있다 그러므로 교정용 밴드 시멘트의 생체 친화성은 재료의 물성과 함께 중요하게 고려되어야 할 사항이다. 이 연구의 목적은 교정용 밴드 시멘트의 세포독성을 평가하는 것으로 현재 임상에서 널리 사용되고 있는zinc phosphate cement (ZPC), glass ionomer (GI), resin modified glass ionomer (RMGI), compomer의 생체 친화성을 평가하기 위해 human gingiva fibroblast를 배양하고 이 세포에 대한 세포수 산정 및 세포 형태관찰, MTT(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, 한천중층시험 등의 세포독성 검사를 시행하여 다음과 같은 결과를 얻었다. 1. 세포수 산정 및 형태 관찰 시험에서 Gl>ZPC, RMGI, RMG124, GI24>compomer24, ZPC24, compomer 순으로 세포독성이 높게 나타났다. 2. MTT assay 에서는 GI>ZPC, RMGI>GI24>ZPC24, compomer, RMGI24, compomer24 순으로 세포독성이 높게 나타났다. 3. 한천중층시험에서 는 GI>GI24, ZPC, ZPC24, RMGI>RMG124, compomer, compomer24 순으로 세포독성 이 높게 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.41-45
• /
• 2000

The purpose of this study was to evaluate the microleakage of compomers. In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of thirty extracted human premolars and molars on cementum cervical margin. The experimental teeth were randomly divided into five groups of six samples (12 surfaces) each, Group 1 : Dyract AP, Group 2 : F2000 compomer(non-etch), Group 3 : F2000 compomer(etch), Group 4 : Elan, Group 5 : Compoglass. The bonding agents and compomer were applied for each group following the manufacturer's instructions. After 500 thermocycling between $5^{\circ}C$ and $55^{\circ}C$, the 30 teeth were placed 1% methylene blue dye for 24 hours then rinsed with tab water. The specimens were embedded in clear resin, then sectioned buccolingually through the center of the restoration with a low speed diamond saw. The dye penetration on each of the specimen was observed with a stereomicroscope. The results of study were statistically analyzed using the Student-Newmann-Kaul' s Test. The results were obtained as follows. 1. All compomer restoration systems did not completely prevent marginal leakage. 2. In enamel margin, F2000 compomer(etch) group showed lower leakage value than other systems. Elan and Compoglass groups showed lower leakage value than Dyract AP and F2000 compomer(non-etch) groups (p<0.05). 3. In cementum margin, F2000 compomer(etch) and F2000 compomer (non-etch) groups showed lower leakage value than other systems. Dyract AP and Elan groups showed lower leakage value than Compoglass group (p<0.05).

• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.705-715
• /
• 2003

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically compomer and Ketac Silver as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiostcal flap was elevated. Following decortication with 1/2 high speed round bur, furcation defect was made on maxillary premolar. 2 month later one premolar was filled with compomer and the other premolar was filled with Ketac Silver. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. Results were as follows. 1. Compomer & Ketac Silver restoration were encapsulated fine connective tissue. 2. In 4 weeks, compomer & Ketac Silver restoration slightly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, compomer & Ketac Silver restoration were less infiltrated iflammatory cell and encapsulated fine connective tissue. 4. Therefore, compomer & Ketac Silver filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances is possible clinical method and this technique is useful method for maxillary furcation involvement but it is thought that periodic maintenance should be needed

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.575-586
• /
• 2000

In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.346-355
• /
• 1999

To evaluate the micro leakage of compomer, 4 materials were divided into 4 groups of 15 cavities each.(Group 1: Z-100, Group 2: Dyarct AP, Group 3: Fuji II LC, Group 4: Compoglass) After the class II cavities were prepared using carbide bur No. 553, all specimen were restored by incremental filling technique. In group 3, Z-100 was filled with a base of a light curing glass-ionomer. After 7 days, all specimens were thermocycled between $5^{\circ}C$ and $55^{\circ}C$ for 500 cycles, followed by placement in 50% silver nitrate dye for 2 hours at $37^{\circ}C$. After rinsed in distilled water, these teeth were immersed in photodeveloping solution and exposed to fluorescent light for 6 hours. Teeth were then washed in distilled water to remove the photodeveloping solution, sectioned mesio-distally and evaluated. The results were as follows : 1. In the cervical portion, there was significant difference between Fuji II LC and other groups(Z-100, Dyract AP, Compoglass), Fuji II LC had the least value.(p<0.05) 2. In the cervical portion, there was not significant difference among Dyract AP, Z-100 and Compoglass. 3. In the occlusal portion, there was not significant difference among Dyract AP, Z-100 and Compoglass. From the results above, In enamel, microleakage of compomer such as Dyract AP and Compoglass resemble to that of composite resin. It is thought that it is due to characteristics of composite resin portion of compomer. But in dentin, microleakage of compomer is higher than that of resin modified glass ionomer cement, it is thought that in compomer, acid-base reaction is not developed with dentin.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.438-444
• /
• 2010

자이오머는 불소를 유리하는 최근 개발된 광중합 레진 제재이다. 본 실험에서는 복합레진, 자이오머, 컴포머를 이용하여 $5^{\circ}C$와 $55^{\circ}C$에서 5000번 열순환 후 압축강도와 미세경도 변화를 비교 평가하였다. 1. 열순환 전.후 모두 압축강도는 복합레진이 가장 높았으며, 자이오머, 컴포머 순으로 낮아졌다. 복합레진은 자이오머, 컴포머와 통계학적으로 유의차를 보였고(p<0.05), 자이오머와 컴포머 사이에는 유의차가 없었다. 2. 열순환 전.후 미세경도는 복합 레진, 자이오머, 컴포머 순으로 낮아졌으며, 각각 통계학적으로 유의차를 보였다(p<0.05). 3. 복합레진, 자이오머, 컴포머는 열순환 후 통계학적으로 유의하게 미세경도가 감소하였다(p<0.05). 이상의 결과를 종합해보면, 자이오머는 컴포머보다 높은 미세경도를 보이지만, 복합레진보다 낮은 압축강도와 미세경도를 보인다. 열순환 후 미세경도가 감소하므로 임상적 사용시 물리적 성질에 대한 충분한 고찰이 필요할 것으로 사료된다.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.229-236
• /
• 2000

유치의 치경부 와동 compomer 수복물에 있어서의 산부식 시간에 따른 미세누출의 정도를 평가할 목적으로, 48개의 발거된 유구치의 협설면에 V급 와동을 형성하고 사용된 compomer와 산부식 시간에 따라 6개의 군으로 나누어 각각 0, 15, 30초간 산부식한 후, 제조자의 지시에 따라 수복하였다 각 군의 색소침투도를 stereomicroscope를 사용하여 관찰하고 미세누출의 정도를 판정하여 다음과 같은 결론을 얻었다. 1. 와동을 산부식 처리를 하지 않는 경우보다 산부식 처리를 하는 경우 미세누출이 감소되었다(p<0.05). 2. 15초간 산부식을 하는 경우와 30초간 산부식을 한 경우에 미세누출의 방지 정도는 유사하였다(p>0.05). 3. 연구에 사용된 두 종류의 compomer 간에 각 군에서의 미세누출의 차이는 없었다(p>0.05). 이상의 결과에 의하면, 유치 치경부와동의 compomer 수복에 있어서 미세누출을 최소화하기 위해서는 산부식처리를 하는 것이 효과적이며, 시행할 경우에는 15초간 시행하는 것이 적합할 것으로 사료되었다.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.12-15
• /
• 2002

The first purpose of present study was to compare the anticariogenic effect of compomer, resin modified glass ionomer cement and composite (RMGIC). The second purpose was to evaluate the recently introduced methods, which use confocal scanning micro-scope, in detecting initial caries around restoration. 2$\times$4$\times$1.5mm cavities were prepared from the recently extracted 50 human teeth on the buccal or lingual surface. The prepared teeth were randomly devided into 5 groups and restored with each filling material. Group 1: Dyract AP, Group 2: compoglass F, Group 3: F2000, Group 4: Z100. Group 5:Fuji II LC. The teeth were stored for 30 days in the distilled water, then stored in the buffer solution for artificial caries development: pH 4.3, lactic acid 100 mM, calcium 16 mM, phosphate 8mM, sodium azide 3mM. Then, the samples were sectioned longitudinally and examined with confical scanning microscope. The results showed that the use of compomer and resin modified glass ionomer cement showed caries inhibition zone whereas the composite did not. There was no difference in the width of caries inhibition zone between compomers and RMGIC. The confocal scanning microscope was useful in detecting initial caries around restoration.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.171-179
• /
• 2001

The purpose of this study was to evaluate the shear bond strength of compomers according to dentin surface treatment. Two materials of compomer were devided into six groups. The compomer used in this study were Dyract AP(D) and F2000(F), Group 1 (DN) and 4(FN) were treated according to manufacturers instructions as control groups. Group 2(DE) and 5(FE) were treated with 37％ phosphoric acid and group 3(DA) and 6(FA) were treated with air abrasion unit (80 psi, 50 m aluminum oxide particles) respectively as experimental groups. After dentin surface treatment, compomers were bonded. Completed samples were stored in 100％ humidity. 37C during 7 days, and then, the shear bond strength of specimens were evaluated. The results were as follows: 1. In the case of Dyract AP, the shear bond strength was showed the highest value of 9.10 MPa in dentin surface treatment with air abrasion unit. but there were no significant differences to the other groups. 2. In the case of F2000. the shear bond strength was showed the highest value of 13.51MPa and there were significant differences to the other groups(p<0.05). 3. The shear bond strength of F2000 was higher than Dyract AP in each dentin surface treatment. and in the case of etching and air abrasion. there were significant differences(p<0.05). 4. As a result of observation of SEM. the most of fracture pattern was adhesive failure in group 1(DN), 2(DE) and 4(FN), and cohesive failure in group 3(DA), S(FE) and 6(FA).

• 대한소아치과학회지
• /
• 제29권4호
• /
• pp.509-518
• /
• 2002

치과 임상에서 널리 사용되고 있는 대표적인 심미성 접착 수복재료인 복합 레진과 글라스 아이어노머 시멘트의 단점을 보완하여 개발된 것으로 알려진 컴포머의 유치 상아질에 대한 결합력을 평가하고자 본 실험을 수행하였다. 치아 교환을 이유로 최근에 발거된 유구치 144개를 실험대상 치아로 선정하였으며, 이 중 120개의 치아는 전단강도 측정실험을 위하여 나머지 24개는 결합계면의 주사전자 현미경 관찰을 위해 무작위로 배분하였다. 각 치아마다 $3{\times}4mm$의 상아질을 노출시킨 후 내경 2.6mm, 높이 2.0mm의 크기로 제작된 폴리에틸렌 주형을 상아질 표면에 고정시킨 다음 각각의 재료를 설정 조건에 따라 충전하였다. 전단강도 실험표본은 만능 시험기를 사용하여 측정하였으며, 주사 전자현미경 관찰 표본 중 1/2은 다시 근원심으로 절단하여 그 결합계면을 관찰하였으며 나머지 1/2은 치아를 완전 탈회시킨 후 상아질 내에 침투된 접착제의 형태를 관찰하였다. 본 실험의 결과 모든 컴포머 군($II{\sim}V$)의 전단강도가 글라스 아이어노머 군(I)보다 높게 나타났고, 산 부식을 시행한 컴포머 군(III, V)이 산 부식을 시행하지 않고 충전한 컴포머 군(II, IV)에 비해 높은 전단강도를 보였으며(p<.05) 복합 레진 군(VI)과의 비교에서도 통계학적인 유의차가 없었다(p>.05). 서로 다른 접착제를 사용한 컴포머군 간의 비교에서는 모두 유의차가 나타나지 않았다. 상아질-수복재 계면의 관찰 결과, 산 부식 처리된 상아질과 결합된 컴포머 군이 처리하지 않은 군에 비해 다소 두꺼운 혼화층이 균일하게 형성되어 있었고 레진 돌기도 더욱 치밀하게 침투한 양상을 보였다. 주사 현미경 관찰에서는 산부식 하지 않은 컴포머 군이 전반적으로 짧고 얇은 레진 태그가 불규칙하게 분포되어 있는 양상을 보인 반면, 산부식을 시행한 군과 복합 레진 군에서는 굵고 긴 레진 태그들이 규칙적이며 치밀한 분포를 나타냈다. 이상의 결과로 미루어 상아질의 산 부식 과정이 컴포머의 결합력 증진에 긍정적 요인으로 작용한 반면 상아질 접착제의 종류는 별다른 영향을 주지 않은 것으로 분석되었다. 결합강도의 비교에서 컴포머가 글라스 아이어노머에 비해 우수한 것으로 평가되어 소아 환자의 유구치 심미 수복재료로서의 가능성이 입증되었다.