• Water Engineering Research
• /
• 제7권1호
• /
• pp.21-28
• /
• 2006

The scouring process is complex and subject to many factors. Recently, experiments for real-time bridge scour monitoring have been active as means for a more reliable scour prediction. Riverbed materials are an important factor in bridge scouring; therefore, an accurate estimation of riverbed material is critical in predicting a scour. As a part of this approach, an ultrasonic sensor, which can not only detect river bottom during floods but can also be installed lose to the underwater structures, was developed. This sensor is able to map the river bottom using an ultrasonic waves with the characteristics of the returning wave, reflected from an object or bottom ground. The reflected wave is unique according to the situations, or materials below. Therefore, it would be possible to identify the consisting materials of a riverbed if we could reveal each characteristic in the received signals. In this study, a preliminary experiment was performed in the laboratory to identify and classify received signals, which is unique to each material. The analysis of this experiment gives the graph, which makes it possible to identify materials of the river bottom through the ultrasonic signals. The proposed graph was verified through a comparison with the actual field data measured in river.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.26-30
• /
• 2005

A rotor run-up or run-down process provide more useful information for modal analysis than normal operation conditions. A traditional difficulty associated with rotor run-up or run-down analysis is the non-stationary nature of vibration data. This paper compares Short-Time Fourier Transform (STFT) and the wavelets analysis in these non-stationary signal analyses. An Adaptive Wavelet Analysis (AWT) is proposed to analyze these signals. Although simulations and experiments in a simple rotor-bearing system show that both STFT and AWT can be used to analyze non-stationary vibration signals in rotor dynamics, proposed AWT provides better results than STFT analysis. From the amplitude-frequency curve obtained by AWT, the modal frequency and damping ratio are calculated. This paper also analyzes the characteristics of signals when the shaft touches the outer hoop in a run-up process. The AWT can give a good result in this complex dynamic analysis of the touching process.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.803-815
• /
• 2016

이 논문에서는 GNSS(global navigation satellite system) 신호를 RF(radio frequency) 대역에서 표본화하여 디지털 영역에서 복조하는 직접 RF 표본화 수신기를 설계하고 그 성능을 살펴보고자 한다. 직접 RF 표본화 방식은 IF(intermediate frequency) 대역에서 AD(analog to digital) 변환을 하고 복조하는 기존의 IF 변환 방식과 다르게, 아날로그 믹서(mixer)를 전혀 사용하지 않고 안테나 출력인 통과대역 신호를 직접 AD 변환하여 이후의 수신기의 모든 과정을 디지털 영역에서 처리하는 기술이다. IF 변환 방식과 비교하면 하드웨어 구조가 덜 복잡하고 전송환경 변화에 따른 재구성이 가능하며 하나의 AD 변환기를 사용하여 여러 대역의 신호를 동시에 변환할 수 있다는 장점이 있다. 이와 같은 재구성 기능과 동시 수신 기능은 특정 대역의 신호가 적으로부터 전파방해를 받았을 때 후속시스템으로의 빠른 전환이 필요한 군용 시스템에서 매우 중요한 역할을 한다. 한편 여러 대역의 신호를 한 번에 AD 변환하려면 수신하고자 하는 신호의 반송파 주파수, 대역폭, 표본화 후의 중간주파수 그리고 보호 대역 등을 고려하여 표본화 주파수를 정하는 것이 중요하다. 이 논문에서는 GPS L1, GLONASS G1 및 G2 등의 GNSS 신호를 동시에 수신할 수 있는 표본화 주파수를 선택하고 이를 적용한 직접 RF 표본화 수신기를 설계한다. 또한 설계한 수신기를 상용 AD 변환기와 소프트웨어를 사용하여 구현한 후 실제 신호의 수신시험을 통해 수신 성능을 살펴본다.

• 전기전자학회논문지
• /
• 제17권2호
• /
• pp.145-150
• /
• 2013

본 논문에서 ICS(Interference Cancellation System) 중계기에서 간섭제거를 위한 새로운 CSS(Complex Signed-Signed) CMA(Constant Modulus Algorithm) 알고리즘을 제안한다. 중계기가 궤환 신호를 가질 때 CSS CMA 알고리즘은 궤환 경로로부터 간섭 신호를 제거하기 위한 디지털 신호 처리를 사용한 ICS 중계기에 대해 제안한다. 제안된 Complex Signed Signed CMA 알고리즘은 스텝 사이즈를 조절함에 따라 하드웨어 복잡도와 성능이 개선된다. 제안된 Complex Signed Signed CMA 알고리즘에서 스텝사이즈가 0.00043인 경우 수렴상태에서 평균 자승 에러는 기존 CMA 알고리즘보다 약 4dB정도 더 낮다. 그리고, 평균 자승 에러 -25dB를 기준으로 LMS(Least Mean Square)와 Signed LMS(Normalized Least Mean Square)보다 수렴회수가 1950 ~ 2150회 정도 줄어든다.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.969-972
• /
• 2000

[Fe II Fe III $BPLNP(OAc)_2](BPh_4)_2$ (1), a new model for the reduced form of the purple acid phosphatases, has been synthesized by using a dinucleating ligand, 2,6-bis[((2-pyridylmethyl)(6-methyl-2-pyridylmethyl)ami-no)methyl]-4-nitrophenol (HBPLNP) . Complex 1 has been studied by electronic spectral, NMR, EPR, SQUID, and electrochemical methods. Complex 1 exhibits two strong bands at 498 nm $(\varepsilon=$ 2.6 ${\times}10^3M-^1cm-^1)$ and 1363 nm $(\varepsilon=$ 5.7 ${\times}10^2M-^1cm-^1)$ in $CH_3CN.$ These are assigned to phenolate-to-FeIII and intervalence charge-transfer transitions, respectively. NMR spectrum of complex 1 exhibits sharp isotropically shifted resonances, which number is half of those expected for a valence-trapped species, indicating that electron transfer between FeⅡ and FeⅢ centers is faster than NMR time scale at room temperature. Complex 1 undergoes quasireversible one-electron redox processes. The $FeIII_2/FeIIFeIII$ and $FeIIFeIII/FeII_2$ redox couples are at 0.807 and 0.167 V ver-sus SCE, respectively. It has Kcomp = 5.9 ${\times}$10 1s(acetato) ligand combination sta-bilizes a mixed-valence FeIIFeIII complex in the air. Interestingly, complex 1 exhibits intense EPR signals at g = 8.56, 5.45, 4.30 corresponding to mononuclear high-spin FeⅢ species, which suggest a very weak magnetic coupling between the iron centers. Magnetic susceptibility study shows that there is a very weak antiferromag-netic coupling (J = $-0.78cm-^1$, H = $-2JS_1${\times}$S_2)$ between FeII and FeIII centers. Thus, we can suggest that complex 1 has a very weak antiferromagnetic coupling between the iron centers due to the electronic effect of the nitro group in the bridging phenolate ligand.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1166-1172
• /
• 1997

[FeⅢ(BLPA)DBC]BPh4, a new functional model for the catechol dioxygenases, has been synthesized, where BLPA is bis((6-methyl-2-pyridyl)methyl)(2-pyridylmethyl)amine and DBC is 3,5-di-tert-butylcatecholate dianion. The BLPA complex has a structural feature that iron center has a six-coordinate geometry with N4O2 donor set. It exhibits EPR signals at g=5.5 and 8.0 which are typical values for the high-spin FeⅢ (S=5/2) complex with axial symmetry. The BLPA complex reacts with O2 within a few hours to afford intradiol cleavage (75%) and extradiol cleavage (15%) products which is very unique result of all [Fe(L)DBC] complexes studied. The iron-catecholate interaction of BLPA complex is significantly stronger, resulting in the enhanced covalency of the metal-catecholate bonds and low energy catecholate to FeⅢ charge transfer bands at 583 and 962 nm in CH3CN. The enhanced covalency is also reflected by the isotropic shifts exhibited by the DBC protons, which indicate increased semiquinone character. The greater semiquinone character in the BLPA complex correlates well with its high reactivity towards O2. Kinetic studies of the reaction of the BLPA complex with 1 atm O2 in CH3OH and CH2Cl2 under pseudo-first order conditions show that the BLPA complex reacts with O2 much slower than the TPA complex, where TPA is tris(2-pyridylmethyl)amine. It is presumably due to the steric effect of the methyl substituent on the pyridine ring. Nevertheless, both the high specificity and the fast kinetics can be rationalized on the basis of its low energy catecholate to FeⅢ charge transfer bands and large isotropic NMR shifts for the BLPA protons. These results provide insight into the nature of the oxygenation mechanism of the catechol dioxygenases.

• 소음진동
• /
• 제1권2호
• /
• pp.121-128
• /
• 1991

In order to use viscoelastic materials efficiently for noise and vibration control, or th qualify newly developed materials, knowledge of the Young' s modulus and loss factor is essemtial. These material properties, the so-called complex Young' s modulus, are frequently treated as dynamic charicteristics because of their dependence upon the frequency. Many techniques have been developed and verified for measuring complex Young' s modulus of viscoelastic materials. Among them, the impedance method is preferable in order to obtain the frequency information in detail. In this method, a cylindrical or prismatic specimen is excited into longitudinal harmonic vibration at one end, the other being fixed, and the resulting force is measured at the driving or fixed end. The amplitude ratio of the two signals and phase angle between them are then used to compute the material properties using various mathematical models. In this paper, the impedance method is investigated theoretically and experimentally. A way to determine the specimen geometry which is most appropriate for the identification of complex Young' s modulus using the lumped mass model is presented and discussed. Then experimental results supporting the theoretical predictions are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.994-996
• /
• 1999

In this paper, we proposed complex demodulation method(CDM) to visualize the instantaneous frequency change of LF component and HF component of HRV signals, which represent the dynamics of sympathetic and parasympathetic (vagal) tone, respectively. As we know the range of the center frequencies of each autonomic tones, we could apply complex demodulation method. To simulate the heart rate variability signal, the IFPM model was adopted for generation of simulated cardiac event series. Then, we can visualize and access the dynamic changes of LF and HF component of autonomic tones in the time-frequency domain.

• 소음진동
• /
• 제9권1호
• /
• pp.60-69
• /
• 1999

In the first paper of this research$^{(1)}$. a new time series method. directional ARMAX (dARMAX) model-based approach. was proposed for rotordynamics identification. The dARMAX processes complex-valued signals, utilizing the complex modal testing theory which enables the separation of the backward and forward modes in the two-sided frequency domain and makes effective modal parameter identification possible. to account for the dynamic characteristics inherent in rotating machinery. In this second part. an evaluation of its performance characteristics based on both simulated and experimental data is presented. Numerical simulations are carried out to show that the method. a complex time series method. successfully implements the complex modal testing in the time domain. and it is superior in nature to the conventional ARMAX and the frequency-domain methods in the estimation of the modal parameters for isotropic and weakly anisotropic rotor systems. Experiments are carried out to demonstrate the applicability and the effectiveness of the dARMAX model-based approach, following the proposed fitting strategy. for the rotordynamics identification.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.377-380
• /
• 2000

In this paper, a new adaptive linearizer architecture with the predistorter is proposed. In the M.Ghaderi's paper, two analog predistorters and an envelope detector are used. Analog circuits for the analog predistorter and the envelope detector can cause imperfection and inaccuracy of the system and make circuits more complex. To solve those problems, most of processes including the predistortion are made by the DSP. The RLS algorithm is applied so that the errors between power amplifier output signals through the postdistorters and predistorted input signals can be converged to the global minimum.