• Journal of Magnetics
• /
• 제18권2호
• /
• pp.202-206
• /
• 2013

In this paper, the MFL (magnetic flux leakage) signals of complex defects on the underground gas pipeline are analyzed and their depths are estimated. Since closely-located defects (complex defects) affect each other, accelerate the progress of defection, and are finally combined to one (cluster), it's meaningful to differentiate complex defects from single defects by analyzing their characteristics. Various types of complex defects are characterized and analyzed by defining the safety distance for interference. 26 artificial defects are carved on the pipeline simulation facility (PSF) to analyze the characteristics of complex defect and demonstrate the accuracy of the proposed complex defect estimation. The proposed method shows average length error of 5.8 mm, average width error of 15.55 mm, and average depth error of 8.59%, respectively.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.114-122
• /
• 2024

Irradiation-induced defects and the precipitates in the wrapper material of the Indian Fast Breeder Test Reactor (FBTR), SS 316 are analyzed using the synchrotron source-based Angle Dispersive X-Ray Diffraction (ADXRD) technique with X-rays of energy 17.185 keV (wavelength ~0.72146 Å). The differences and similarities in the high displacement damage samples as a function of dpa (displacement per atom) and dpa rate in the range of 2.9 × 10^-7- 9 × 10^-7 dpa/s are studied. Ferrite and M₂₃C₆ are commonly observed in the present set of high displacement damage 40-74 dpa SS 316 samples irradiated at temperatures in the range of 400-483 ℃. Also, the dislocation density has increased as a function of the irradiation dose. The X-ray diffraction peak profile parameters quantified such as peak shift and asymmetry show that the irradiation-induced defects are sensitive to the dpa rate-irradiation temperature combinations. The increase in yield strength as a function of displacement damage is also correlated to the dislocation density.

• 한국치위생학회지
• /
• 제18권3호
• /
• pp.347-358
• /
• 2018

Objectives: The purpose of this study is to identify the association between oral health status and pulmonary ventilatory defects. Methods: The 6th (2013-2015) National Health and Nutrition Examination Survey data was used. The study subjects were those aged 40-79 who had pulmonary function examination. Complex samples general linear model analysis, Complex samples cross-tabulation analysis, and Complex samples logistic regression analysis were conducted. Results: In terms of restrictive ventilatory defects, the study subjects (8.3%) who recognized that their oral health status was bad outnumbered those who recognized that their oral health status was good (6.1%) (p<0.05). Many of the study subjects who experienced difficulty in biting, chewing and/or speech, and who had an unhealthy periodontal had restrictive ventilatory defects and obstructive ventilatory defects (p<0.05). The association between oral health status and pulmonary ventilatory defects was analyzed. The findings showed that those who had unhealthy periodontal had a 1.33 times higher probability of pulmonary ventilatory defects than those who had a healthy periodontal (p<0.05). After taking into account general characteristics (age, sex, incomes, education, and smoking) of the subjects, the association between oral health status and pulmonary ventilatory defects was analyzed. The result found that only in cases where one experienced dental caries was an association with pulmonary ventilatory defects found. In other words, those who had dental caries showed a 0.73 times higher probability of pulmonary ventilatory defects than those who had no dental caries (p<0.05). Conclusions: Based on the findings of this research, oral health status was found to be associated with pulmonary ventilatory defects. To improve oral health, it is necessary to provide life-cycle stages based oral health education. Therefore, it is required to develop an oral health education program and develop a national oral health policy.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.109-119
• /
• 2016

When manufactured parts undergo large deformations during the manufacturing process, the global specifications of a part based on the concept of tolerance zone defined in the ISO 1101 standard [1] enable one to control the part's global defects. However, the extent of this tolerance zone is too large when the objective is to minimize local defects, such as hollows and bumps. Therefore, it is necessary to address local defects and global defects separately. This paper refers to the ISO 10579 standard [2] for flexible parts, which enables us to define a stressed state in order to measure the part by straightening it to simulate its position in the mechanism. The originality of this approach is that the straightening operation is performed numerically by calculating the displacement of a cloud of points. The results lead to a quantification of the global defects through various simple models and enable us to extract local defects. The outcome is an acceptable tolerance solution. The procedure is first developed for the simple example of a steel bar with a rectangular cross section, then applied to an industrial case involving a complex 3D surface of a turbine blade. The specification is described through ISO standards both in the free state and in the straightened state.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.44-48
• /
• 2011

Maxillary defects are inherently complex because they generally involve more than one midfacial component. In addition, most maxillary defects are composite in nature, and often require bony support, as well as a mucosal lining for reconstruction. Therefore, midfacial bone and soft tissue defects present a unique challenge because they require a complex arrangement of tissues in a relatively limited space. This might be difficult to achieve only with free osteocutaneous flaps. The use of bone grafts allows greater flexibility in a reconstruction but is limited by graft resorption. We report a case of a patient reconstructed with a lateral arm free flap, iliac bone graft, sagital split ramus osteotomy for the reconstruction of a right maxillary defect zygomatico-maxillary defect caused by a zygomatico-maxillary malignant tumor resection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.959-962
• /
• 1988

This paper describes an automatic visual inspection system for fabric defects based on pattern recognition techniques. The inspection for fabric defects can be separated into three sequences of operations which are the detection of fabric defects[1], the classification of figures of fabric defects, and the classification of fabric defects. Comparing projections of defect-detected images with the predefined complex, the classification accuracy of figures of fabric defects was found to be 95.3 percent. Employing the Bayes classifier using cluster shade in SGLDM and variance in decorrelation method as features, the classification accuracy of regional figure defects was found to be 82.4 percent. Finally, some experimental results for line and dispersed figures of fabric defects are included.

• 한국환경복원기술학회지
• /
• 제23권3호
• /
• pp.91-104
• /
• 2020

This study was conducted to analyze the characteristics of defects according to the type of block and spatial type by quantitatively examining defects occurring in block pavement in apartment complex. According to the research results, depending on the type of block, defects have occurred 1,394.3ea/100㎡ in interlocking paver blocks, 464.8ea/100㎡ in clay brick paver blocks, and 235.1ea/100㎡ in shot blasted paver blocks. By space type, the defects were occurred 1,576.0ea/100㎡ on the access road paved by interlocking paver blocks and the defects were found 1,139.6ea/100㎡ in interlocking paver blocks, 235.1ea/100㎡ in shot blasted paver blocks, and 797.1ea/100㎡ in clay brick paver blocks, on the sidewalk. Also the defects are occurred 455.6ea/100㎡ on the resting space and 403.2ea/100㎡ on the gym space paved by clay brick paver blocks. Through the size analysis of the defects in the block paver, in the case 'peeling', the largest volume of 2,539.0㎣ on the sidewalk paved with shot blasted paver blocks, and 'Subsidence' occurred at the widest area of 2,096.0㎠ on the sidewalk where interlocking paver block was constructed. The difference in defect occurrence according to the type of block is considered to be influenced by the block production process, and the space type is considered to be caused the difference in the occurrence of defects according to the cause of construction and the usage pattern of residents. This study conducted a survey on defects in block and analyzed the defect characteristic according to paver material and space type. Base on this, it is judged that it can be used as an efficient basic data for material replacement, improvement, paver planning and construction in the future.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.94-101
• /
• 2009

Complex Products may present more than one type of defects and these defects are not always of equal severity. These defects are classified according to their seriousness and effect on product quality and performance. Demerit systems are very effective systems to monitoring the different types of defects. So, classical demerit control chart used to monitor counts of several different types of defects simultaneously in complex products. S.M. Na et al.(2003) proposed the Demerit-CUSUM for the improvement of the demerit control chart performance and Nembhard, D. A. et al.(2001) and G.Y Cho et al.(2004) developed a Demerit control chart using the EWMA technique and evaluated the performance of the control chart. In this paper, we present an effective method for process control using the Demerit-CUSUM with fast initial response. Moreover, we evaluate exact performance of the Demerit-CUSUM control chart with fast initial response, Demerit-CUSUM and Demerit-EWMA according to changing sample size or parameters.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.52-57
• /
• 2020

In this study attempted to prevent defects due to blow holes among defects of sand casting products. It was intended to reduce the defect rate by reducing the blow hole of the inner surface. Currently, expectations and requirements for the quality level of non-ferrous aluminum casting in the casting industry are increasing. In addition, the shape is complex and the shrinkage precision is required. Among them, the test prototype is expensive to manufacture the mold, and the production time is also long, and the product is manufactured by sand casting. At this time, the highest defect rates are defects caused by shrinkage defects, surface defects, and blow holes.. At this study, the manufacturing time was shortened by using the shape of the fluid movement path in advance. Also, it is possible to reduce defects due to blow holes.

• Archives of Reconstructive Microsurgery
• /
• 제18권1호
• /
• pp.1-8
• /
• 2009

Purpose: The perforator flaps have established their role in the reconstruction of various soft tissue defects. For the last five years, we have extensively used anterolateral thigh (ALT) flap for the reconstruction of the complex tissue defects of the hand and upper extremity and report the clinical results and our experiences with the versatile applications of this flap. Materials and Methods: From March 2003 through May 2008, 119 free ALT perforator flaps were transferred for reconstruction of the complex tissue defects of the elbow, forearm, wrist and hand after crushing or degloving injuries as well as severe scar contractures. There were 95 females and 24 males. The mean age of the patients was 37 years and mean size of the flap was 170 $cm^2$. In 20 cases, the flap was vascularized by septocutaneous and in 99 cases by musculocutaneous perforators. Intra-muscular dissection length averaged 3.4 cm. The total length of pedicle averaged 8.4 cm and the average arterial diameter was 0.84 mm. End-to-end arterial anastomosis was performed in 103 cases and end-to-side in 16 cases. Results: Flap survival rate was 98.3%(117/119) and there were 6 cases of partial necrosis. Donor site was closed primarily in 41 cases and skin grafts were applied in 78 cases. Conclusion: The reliability and versatility of ALT flap makes it one of the foremost choices for the reconstruction of complex tissue defects of the upper extremity.