• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.907-910
• /
• 1998

In this paper, we present a comparative performance analysis of several blocking artifact reduction algorithms. For the performance analysis, we propose a block boundary region classification algorithm which classifies each horizontal and vertical block boundary into four regions using brightness change near the block boundary. The PSNR performance of each algorithm is compared. The MSE according to each block boundary region is also compared. Experimental results show that the wavelet transform based blocking artifact reduction algorithms have better performance over the other methods.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.431-439
• /
• 2018

Less mature nuclear reactor technologies are characterized by a greater uncertainty due to insufficient detailed design information, operational data, cost information, etc., but the expected performance characteristics of less mature options are usually more attractive in comparison with more mature ones. The greater uncertainty is, the higher economic risks associated with the project realization will be. Within a comparative evaluation of less and more mature nuclear reactor technologies, it is necessary to apply economic risk measures to balance judgments regarding the economic performance of less and more mature options. Assessments of any risk metrics involve calculating different characteristics of probability distributions of associated economic performance indicators and applying the Monte-Carlo method. This paper considers the applicability of statistical risk measures for different economic performance indicators within a trial case study on a comparative evaluation of less and more mature unspecified LWRs. The presented case study demonstrates the main trends associated with the incorporation of economic risk metrics into a comparative evaluation of less and more mature nuclear reactor technologies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.917-920
• /
• 2006

This paper reports a comparative study for performance evaluation guidelines for bridge bearings. Guidelines for bridge bearings such as KS, EN1337, AASHTO LRFD, and Japanese code were analyzed. In addition, fatigue tests of elastomeric bearing are being conducted for allowable shear deformation and compressive stress. Based on literature survey and tests, the innovative concept of performance evaluation guidelines for bridge bearings is suggested.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.101-120
• /
• 2020

Purpose - The buyer's right to withhold performance is a useful and important self-help remedy to protect himself from the seller's breach of contract, and it is also the coercive means to induce the seller to perform his part of contract. However, the buyer's exercise of such a right often exposes himself to the risk of breaching the contract. This is generally due to his ignorance when he is entitled to the right and also uncertainties inherent in the law. Therefore, the purpose of this paper is to examine what the requirements should be fulfilled before the buyer exercises the right for the seller's actual breach of contract. Design/methodology - In order to achieve the purposes of the study, it executes a comparative study of the rules as to the requirements for the buyer's right to withhold performance for the seller's actual non-performance under the CISG and the CESL. It mainly focuses on performance due, the seller's non-performance, the buyer's readiness to perform and the requirement of notice. Findings - The main findings of this comparative study can be summarized as follows: Although the CISG has no expressive provision for the buyer's general right to withhold performance for the seller's actual non-performance, it may be inferred from the general principles the CISG underlies, synallagmatic nature of the contract. In addition, it can be drawn by analogy from relevant provisions of the CISG. On the other hand, the CESL expressively provides that the buyer has a general right to withhold performance where the seller fails to tender performance or perform the contract. Therefore, it seems that the position of CESL is rather easier and more apparent to allow the buyer to withhold performance for the seller's non-performance. Originality/value - Most of the existing studies on the right to withhold performance under the CISG have centered on the right to withhold performance for an anticipatory breach of contract. On the other hand, there have been few prior studies on the right to withhold performance for the actual nonperformance during a contractual period of performance. Therefore, this paper examined the requirements for the buyer's right to withhold performance under the CISG and the CESL in a comparative way for the seller's actual breach of obligation. In this conclusion, it may provide practical and legal considerations and implications for business people who are not certain about the right to withhold performance.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.794-804
• /
• 2022

Transformer models have had a great impact on natural language processing (NLP) in recent years by realizing outstanding and efficient contextualized language models. Recent studies have used transformer-based language models for various NLP tasks, including Persian named entity recognition (NER). However, in complex tasks, for example, NER, it is difficult to determine which contextualized embedding will produce the best representation for the tasks. Considering the lack of comparative studies to investigate the use of different contextualized pretrained models with sequence modeling classifiers, we conducted a comparative study about using different classifiers and embedding models. In this paper, we use different transformer-based language models tuned with different classifiers, and we evaluate these models on the Persian NER task. We perform a comparative analysis to assess the impact of text representation and text classification methods on Persian NER performance. We train and evaluate the models on three different Persian NER datasets, that is, MoNa, Peyma, and Arman. Experimental results demonstrate that XLM-R with a linear layer and conditional random field (CRF) layer exhibited the best performance. This model achieved phrase-based F-measures of 70.04, 86.37, and 79.25 and word-based F scores of 78, 84.02, and 89.73 on the MoNa, Peyma, and Arman datasets, respectively. These results represent state-of-the-art performance on the Persian NER task.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.1-12
• /
• 2020

To assess the performance and characteristics of colored building-integrated photovoltaic (BIPV) modules, a comparative assessment of empirical performance was conducted on colored BIPV modules (gray, blue, and orange) and general BIPV module. These modules were installed on the south-facing slope (30°) for comparative assessment through a field test. Monitoring data were collected every 10 min from December 20, 2019 to January 21, 2020 and used to performance and characteristics analysis. Performance ratio and module efficiency were utilized during performance indexing for comparative assessment. For general BIPV modules, the operational efficiency was analyzed at 16.63%, whereas for colored BIPV modules, 13.70% (gray), 15.12 % (blue), and 14.49% (orange) were analyzed. It was discovered that the efficiency reduction caused by transmission losses owing to the application of colored cover glasses were 17.74% (gray), 9.05% (blue), and 9.86 % (orange), under field testing conditions. These values turned on an additional 7% reduction in efficiency for gray BIPV modules, compared to the degradation resulting from transmission drop (gray: 10.87%, blue: 8.99%, and orange: 9.02%) calculated using the efficiency of each module in standard test conditions (STC). Performance ratio analysis resulted in the following values: 0.92 for general BIPV modules, and 0.85 (gray), 0.91 (blue), and 0.91 (orange) for colored BIPV modules. As demonstrated by the above results, modules with a colored cover glass may differ in their operational performance depending on their color, unlike general modules. Therefore, in addition to the performance evaluation under STC, additional factors of degradation require consideration through field test.

• Fashion, Industry and Education
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2016

This study examined the comparative advantage of manmade textile (MMT) industries in the United States (US) and South Korea (SK). The Revealed Comparative Advantage (RCA) framework was used to assess the MMT industries' performance in both countries from 2004 to 2013. With the recent ratification of the United States-South Korea Free Trade Agreement (KORUS FTA), it is important to understand the current state of these industries. Using UN Comtrade export data, the RCA index values were calculated and analyzed for 27 MMT commodities, three aggregate groups, and the whole industry. It was found that SK had a consistent comparative advantage for the whole industry. Furthermore, SK had a larger number of products with a comparative advantage. The research findings indicate that the MMT industry in SK is likely to outperform the US following the complete ratification of the KORUS FTA.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.397-399
• /
• 2004

Generally microkernel has properties of Portability, reusability and scalability. In particular microkernel technique has been applied to development of real time kernel on embedded system because life cycle of micro processor is shortened. In this paper we study Properties of micro kernel and Comparative Performance of Nucleus and ${\mu}ITRON$ based on microkernel.

• IE interfaces
• /
• v.9 no.2
• /
• pp.191-202
• /
• 1996

A variety of approaches on performance evaluation modeling have appeared in the technical literature for flexible manufacturing systems(FMS) which can be evaluated only through computer simulation. This study represents a comparative approach for FMS performance evaluation modeling based on reliability, availability and maintainability, and life cycle cost. The methodology proposed in this research includes the following three-step generative approaches. First, a static model to find the initial system configuration is considered under the assumption that the system availability is given as one (failure and maintenance are not considered), and in second step, a stochastic simulation is proposed to serve as a performance evaluation model for FMS with stochastic failure and repair time. In the last step, we developed a simulation modeling using a simulator, FACTOR/AIM to consider a variety of performance factors and dynamic behavior of FMS. Also the applicability and validity of the proposed approaches has been tested and compared through the results of a sample problem using computer programs and procedures developed in each step.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.226-229
• /
• 2009

Housing Performance Grade Indication System is one of the advanced system which operate globally in three countries. Housing Performance Grade Indication System of the Japan and Korea has points of similarity and distinction according to special situations of own condition and government. The purpose of a study is how characteristics have points of view about background, composition and an outline of the system, indication standard and method, the situation of issue, making progress direction and what is the clear differences. Also, it is to obtain hints for making progress direction of domestic Housing Performance Grade Indication System. The method of study is in parallel with literature survey, also collection through visiting to researcher, operation company, evaluation institution, housing company of the Japan. and to use data as a result of international workshop on November 2008. Because domestic research team is studying about making system and evaluation, revision, this study will make use this data.