• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.549-554
• /
• 2006

The objective of this paper is to propose a system by means of which the utilization of radio frequency spectrum may be improved from the state of extreme inefficiency at the present time in Kazakhstan to a state of efficiency and equilibrium in the future. The main solutions to efficiently use radio frequency spectrum in Kazakhstan will be described in this paper. There are 'Spectrum Utilization, Spectrum Sharing and Reuse the Spectrum' in which the radio frequency can be propagated in wide range using smalt amount of spectrum, or broadcast several channels via one spectrum sharing. In order to embed these systems in practice it will be better to make modifications consider Government policy and geographical and social requirements.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.213-219
• /
• 2021

We describe a single-channel rubidium (Rb) radio-frequency atomic magnetometer (RFAM) as a receiver that takes magnetic signal resonating with Zeeman splitting of the ground state of Rb. We optimize the performance of the RFAM by recording the response signal and signal-to-noise ratio (SNR) in various parameters and obtain a noise level of 159 $fT{\sqrt{Hz}}$ around 30 kHz. When a resonant radiofrequency magnetic field with a peak amplitude of 8.0 nT is applied, the bandwidth and signal-to-noise ratio are about 650 Hz and 88 dB, respectively. It is a good agreement that RFAM using alkali atoms is suitable for receiving signals in the very low frequency (VLF) carrier band, ranging from 3 kHz to 30 kHz. This study shows the new capabilities of the RFAM in communications applications based on magnetic signals with the VLF carrier band. Such communication can be expected to expand the communication space by overcoming obstacles through the high magnetic sensitive RFAM.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.44-49
• /
• 2013

LED communication is a wireless communication technology to transmit information using visible light coming out from the LED(Light Emitting Diode). It is a technique that can overcome RF(Radio Frequency) communication problems that are frequency allocations, human body hazards, security vulnerabilities, and interference between electronic devices. As a technique that can be used as lighting and communications with using LED, LED communication is suitable for ubiquitous environment. This paper introduces the process of data transmission algorithm for LED communication systems algorithm using LED, PD(Photodiode), and MCU(Micro Controller Unit).

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.527-530
• /
• 2002

The frequencies for HAPS used in fixed wireless access are allocated in the millimeter wave bands. The systems using these frequencies can have a serious impact on the radio communication qualities due to rain. In this paper, we compare the specific rain attenuation using CM(combined) raindrop size distribution with those using different sevral raindrop size distributions for the frequency bands 28/48㎓. The rain attenuations using CM raindrop size distribution for the path between the earth and HAPS platform according to the elevation angle are described.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2021

The small radio frequency tracking radar is a tracking system with a radio frequency sensor that identifies a target through all-weather radio frequency signal processing for a target and searches, detects and tracks the target for the major target. In this paper, we describe the development of a board equipped with TMS320C6678 and XILINX FPGA (Field Programmable Gate Array), a high-speed multi-core DSP that acquires target information through all-weather radio frequency and identifies a target through real-time signal processing. We propose DSP-FPGA combination architecture for DSP and FPGA selection and signal processing, and also explain the design of SRIO for high-speed data transmission.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.79-85
• /
• 2006

We concern practical of utilizable frequency with wireless communication and broadcast technology. And, present that wireless application technology such of Ubiquitous sensor network, mobile or fixed wireless communication and wireless broadcast will require more efficiently using of frequency. In this paper, we studied Cognitive Radio that necessity of cognitive and intelligent technology in variable wireless environment and IEEE 802.22 standardization.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.102-107
• /
• 2012

In this paper, we presented interference scenarios and an evaluation methodology for the co-frequency radio interference between a multi-beam mobile satellite communication system and a mobile communication system in 2.1 GHz band. Radio interferences between these systems are calculated using a minimum coupling loss method and an assesment for minimum separation distances was conducted for coexistence of a mobile satellite system and a mobile system in the same geographical area.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.25-32
• /
• 2009

The advancements in the infusion of broadcasting and communication and the radio frequency identification technology have made the next generation mobile communication service technology be recognized as an important technology in many different fields and demanded systems of practical service using the technology. Designed in the study was a multimedia platform that would increase the utilization efficiency of limited frequency resources, which made an important part of the next generation mobile communication technology using the radio frequency identification technology, search for vacant frequencies not generating interfering signals to the old frequency users, and consider the growth of infused and complex services. In order to implement the platform, the investigator applied STI as a research model to maximize the functions of a service system and improve reliability. And also suggested IDMA of information required for platform building to maximize the functions of a service system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.58-71
• /
• 2019

This paper proposes architecture of a cognitive radio engine platform and the allowable frequency channel reasoning method that enables acquisition of the allowable channels for the military tactical network environment. The current military tactical wireless communication system is increasing need to secure a supplementary radio frequency to ensure that multiple wireless networks for different military wireless devices coexist, so that tactical wireless communication between the same or different systems can be operated effectively. This paper presents the allowable frequency channel reasoning method based on cognitive radio engine for realizing DSA(Dynamic Spectrum Access) as an optimal available frequency channel. To this end, a case-based allowable frequency channel reasoning method for cognitive radio devices is proposed through modeling of primary user's traffic status and calculation of channel occupancy probability. Also through the simulation of the performance analysis, changing rate of collision probability between the primary users' occupancy channel and the available channel acquisition information that can be used by the cognitive radio device was analysed.