• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.981-992
• /
• 2004

In this paper, we develop the noninformative priors for the common scale parameter in the inverse gaussian distributions. We developed the first and second order matching priors. Next we revealed that the second order matching prior satisfies a HPD matching criterion. Also we showed that the second order matching prior matches alternative coverage probabilities up to the second order. It turns out that the one-at-a-time reference prior satisfies a second order matching criterion. Some simulation study is performed.

• Korean Circulation Journal
• /
• 제52권12호
• /
• pp.853-864
• /
• 2022

A retrospective observational study is one of the most widely used research methods in medicine. However, evidence postulated from a single data source likely contains biases such as selection bias, information bias, and confounding bias. Acquiring enough data from multiple institutions is one of the most effective methods to overcome the limitations. However, acquiring data from multiple institutions from many countries requires enormous effort because of financial, technical, ethical, and legal issues as well as standardization of data structure and semantics. The Observational Health Data Sciences and Informatics (OHDSI) research network standardized 928 million unique records or 12% of the world's population into a common structure and meaning and established a research network of 453 data partners from 41 countries around the world. OHDSI is a distributed research network wherein researchers do not own or directly share data but only analyzed results. However, sharing evidence without sharing data is difficult to understand. In this review, we will look at the basic principles of OHDSI, common data model, distributed research networks, and some representative studies in the cardiovascular field using the network. This paper also briefly introduces a Korean distributed research network named FeederNet.

• 한국임상보건과학회지
• /
• 제3권1호
• /
• pp.276-289
• /
• 2015

Purpose. To efficiently manage hospitals, this study aims to analyze the general characteristics, common-type balance sheet, common-type profit and loss statement and financial ratio of a tertiary general hospital and use the results as basic data for future hospital development by comprehending causes for problems and analyzing hospital management. Methods. By using information about a tertiary general hospital, located in A Metropolitan City, provided through Alio (www.alio.go.kr), a public organization information provider, Health Insurance Review & Assessment Service, and Ministry of Health and Welfare, this study used data during 3 years(2011 to 2013) by analyzing the general characteristics, common-type balance sheet, common-type profit and loss statement, industrial mean ratio and financial ratio of hospitals. Results. This study came to the following conclusions through the general characteristics, common-type balance sheet, common-type profit and loss statement, industrial mean ratio, financial ratio, circular chart and ROI by analyzing the data from 2011 to 2013. Conclusions. Overall, A Tertiary General Hospital showed an increase in fixed cost due to the construction of J Hospital and even in the size of capital and assets. It also showed an increase in medical profit, but the increase of its medical cost was higher, resulting in a financial loss. Especially, this hospital showed a slight decrease in net profit, featuring a reduction in inventory turnover. When the management of A Tertiary General Hospital was predicted based on such features, this hospital is expected to improve its profit structure through the opening of J Hospital, and it is necessary for this hospital to increase and sustain the turnover rate of inventories accumulated by managing them better.

• KIEAE Journal
• /
• 제9권2호
• /
• pp.37-42
• /
• 2009

Eco-village is emerging as one of housing styles in the modern age. The common space in Eco-village uses environment-friendly materials while residents appear to aspire to a community. The common space in Eco-village offers a place of interchange and interaction for both visitors and residents as a transit area connecting dwelling units. It also forms the sense of community and serves as a space that builds friendly relations among residents. However, there seems to be a lack of research compare to its various roles and importance for this common space, which is an significant factor in establishing Eco-village plans. The purpose of this study is to provide research data by creating a layout drawing of Eco-village and reveal the characteristics of space boundary and practical use of common space through case studies on villages. This will serve as actual data in designing common space which would correspond to the purpose of Eco-village planning.

• 한국항공우주학회지
• /
• 제42권3호
• /
• pp.191-198
• /
• 2014

본 연구는 유체-고체 연성 해석이 활발히 진행되고 있는 고체로켓의 3차원 연소실 상경계면 형상에 대해 정보 전달 기법 중 하나인 공통세분 기법의 적용을 목적으로 수행되었다. 본 기법은 불일치하는 경계면간 정보 전달에도 보존성과 정확도를 동시에 만족시킬 수 있다는 장점을 갖는다. 기법 구현은 상경계면에 공통표면을 구성하고 특정 오차를 최소화 시키는 최소화 내삽법을 적용하는 과정으로 수행되었다. 이를 바탕으로 다양한 다차원 상경계면 형상에서 연속 및 불연속 함수를 이용한 정보 전달 실험을 수행하였고, 다른 기법들과 해석 결과를 비교하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.911-923
• /
• 2014

Ad hoc cognitive radio wireless sensor networks allow secondary wireless sensor nodes to recognize spectrum opportunities and transmit data. Most existing protocols proposed for ad hoc cognitive radio wireless sensor networks require a dedicated common control channel. Allocating one channel just for control packet exchange is a waste of resources for channel-constrained networks. There are very few protocols that do not rely on a common control channel and that exchange channel-negotiation control packets during a pre-allocated time on the data channels. This, however, can require a substantial amount of time to access the channel when an incumbent is present on the channel, where the nodes are intended to negotiate for the data channel. This study examined channel access delay on cognitive radio wireless sensor networks that have no dedicated common control channel.

• 한국IT서비스학회지
• /
• 제12권3호
• /
• pp.311-321
• /
• 2013

In the community of software engineering, diverse modeling languages are used for representing all relevant information in the form of models. Also many different models such as business model, business process model, product models, interface models etc. are generated through software life cycles. In this situation, models need to be integrated for enterprise integration and enhancement of software productivity. Researchers propose rebuilding models by a specific modeling language, using a intemediate modeling language and using common reference for model integration. However, in the current approach it requires a lot of cost and time to integrate models. Also it is difficult to identify common objects from several models and to update objects in the repository of common model objects. This paper proposes software model integration using metadata model based on Linked data. We verify the effectiveness of the proposed approach through a case study.

• 대한치과기공학회지
• /
• 제33권3호
• /
• pp.211-218
• /
• 2011

Purpose: The purpose of the study was a quantitative evaluation of common errors in digital impression procedure using CEREC$^{(R)}$ AC system. Methods: Two-hundreds digital impression data comprising 174 inlays, 26 onlays by CEREC$^{(R)}$ AC in-office CAD/CAM system were obtained from a dental clinic. One evaluator assessed errors of the digital impression data and divided into five categories of errors: inappropriate scanner positioning (ISP), improper handling with a scanner (IHS), irregular powder arrangement (IPA), improper cavity preparation (ICP), and insufficient scanned data (ISD). Results: The most common errors were IPA(21%), and ISP and ISD were followed by 17% respectively. IHS was found in 14.5% of all digital impression data. ICP comprising only 6.5% was the rarest. Conclusion: Most errors were due to inaccurate manipulation with an intraoral scanner or improper cavity preparation for scanning. A deliberate manipulation to prevent common errors mentioned may deliver an optimal result in the digital impression procedure.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권8호
• /
• pp.3539-3542
• /
• 2015

Background: Retrospective data on 165 patients who presented with a parotid mass and underwent surgery in our clinics during 2000-2009 were examined. The obtained data (demographic data, surgical procedures, histopathological diagnoses) were compared to similar studies to make contributions to the literature. Materials and Methods: Patients were classified according to their histopathological diagnosis. Surgical procedures and patient follow-up were clarified. The results are presented as means and standard deviations. Results: Of the 165 masses, 134 (81.3%) were benign and 31 (18.7%) were malignant. Pleomorphic adenoma was the most common benign tumour (79 patients, 59%). Lymphoma and adenoid cystic carcinoma were equally common and were the most common malignant parotid gland tumours (both 6 patients, 19.3%). The most frequent surgical procedure was superficial parotidectomy (92 patients, 55.7%), and the most commonly encountered surgical complication was facial paralysis (12 patients, 7.2%). Conclusions: Our data are generally in line with the literature but lymphoma was more common than in most previous reports. Although the number of cases was low, the high incidence of parotid gland lymphoma was remarkable.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.101-105
• /
• 2011

In most shipbuilding company, cutting procedure is proceed by cutting machine which run by CNC(Computer Numerical Code) data. In our cutting process, all CNC data is created by our nesting post processor system automatically. Among them, in case that cutting piece in the remnant plate, our system creates only one piece CNC data. Because remnant plate is not typical shape, and ship designers don't know remnant plate shape and quantity. In can happen some merit and good point if we modify 1:1 piece NC data by shorten cutting path, reducing cutting time or re-arrangement piece. For modifying cutting data, outside workers have to call to ship designer or have to go to NC control room where control the CNC system and cutting machine. It makes stop work process, and it waste time. In this paper, we introduce a program that can modify and replace 1:1 NC data with continuous or common NC data automatically.