• 제목/요약/키워드: combined road

검색결과 207건 처리시간 0.019초

수면방해에 대한 복합소음의 종류와 S/N비의 영향 (Effect of Type and S/N Ratio of Combined Noise Sources on Sleep Disturbance)

  • 이평직;심명희;전진용
    • 한국소음진동공학회논문집
    • /
    • 제19권9호
    • /
    • pp.960-966
    • /
    • 2009
  • The World Health Organization(WHO) has reported the sleep disturbance as one of the adverse effects of noise. And the effect of combined noise sources on human have been investigated because community noises are seldom heard and are concurrent. Therefore, the effects of combined noise source and its S/N ratio on sleep disturbance were investigated; as a single noise source, road traffic noise was selected, and construction and movie noise were combined with road traffic noise. Tests for sleep disturbance were conducted in bedrooms and the effect on each subjects' sleep was evaluated by questionnaire. The results showed that the rate of awakening increased slightly only when the SPL of construction noise was 10 dB higher than that of road traffic noise. It was also found that the sleep disturbance was affected by the type of combined noise sources and its S/N ratio.

제방겸용도로 건설에 따른 제방 안정성 해석에 관한 연구 (A Study on the Stability of Embankment Due to the Construction of Embankment Combined Use Road)

  • 김성남;이영우
    • 한국도로학회논문집
    • /
    • 제10권3호
    • /
    • pp.109-118
    • /
    • 2008
  • 본 연구에서는 현재 실존하는 제방을 대상으로 제방겸용도로 건설에 따른 안정성의 변화를 살펴보기 위해 건설단계별로 도로건설을 위한 성토 후, 겸용도로 건설 후 도로를 주행하는 차량에 의한 교통하중이 재하될 경우로 구분하여 안정성 변화를 분석하였다. 연구결과 겸용도로 건설을 위한 성토 후와 교통하중(DB-24)을 적용하였을 경우 모두 일반적인 안전율 기준인 1.3을 상회하고 있어 겸용도로 건설에 따른 제방의 안전은 확보되는 것으로 분석되어 제방겸용도로의 건설은 부지 확보 비용 절감을 위해 건설이 가능할 것으로 판단된다. 그러나 겸용도로의 건설로 인해 제방의 안전율 감소 현상이 발생하기 때문에 안정성에 대한 사전 검토가 충분히 이루어져야 할 것이다. 특히 안전율 감소가 가장 큰 경우는 비정상류 상태의 수위상승의 경우로 분석되어 하천제방과 같이 수위변화가 빈번한 경우에는 비정상류 해석으로 설계하는 것이 바람직하며 제내지의 사면경사는 기존제방과 동일한 1:2의 경사를 유지하도록 설계하는 것이 필요할 것으로 판단된다. 또한, 교통하중에 의한 안전율 감소현상도 발생하는 것으로 분석되어 겸용도로 건설 후 주행차량의 하중제한 등 유지 관리에도 지속적인 관심을 기울여야 할 것으로 판단된다.

  • PDF

다중카메라와 레이저스캐너를 이용한 확장칼만필터 기반의 노면인식방법 (Road Recognition based Extended Kalman Filter with Multi-Camera and LRF)

  • 변재민;조용석;김성훈
    • 로봇학회논문지
    • /
    • 제6권2호
    • /
    • pp.182-188
    • /
    • 2011
  • This paper describes a method of road tracking by using a vision and laser with extracting road boundary (road lane and curb) for navigation of intelligent transport robot in structured road environments. Road boundary information plays a major role in developing such intelligent robot. For global navigation, we use a global positioning system achieved by means of a global planner and local navigation accomplished with recognizing road lane and curb which is road boundary on the road and estimating the location of lane and curb from the current robot with EKF(Extended Kalman Filter) algorithm in the road assumed that it has prior information. The complete system has been tested on the electronic vehicles which is equipped with cameras, lasers, GPS. Experimental results are presented to demonstrate the effectiveness of the combined laser and vision system by our approach for detecting the curb of road and lane boundary detection.

전력밀도함수를 이용한 노면형상 생성에 관한 연구 (Generation of Road Surface Profiles with a Power Spectral Density Function)

  • 김광석;유완석
    • 한국자동차공학회논문집
    • /
    • 제5권1호
    • /
    • pp.136-145
    • /
    • 1997
  • To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

  • PDF

도로교통소음과 철도소음 복합노출지역에서의 성가심 반응 (Study on the Annoyance Response in the Area Exposed by Road Traffic Noise and Railway Noise)

  • 고준희;장서일;손진희;이건
    • 한국소음진동공학회논문집
    • /
    • 제20권2호
    • /
    • pp.172-178
    • /
    • 2010
  • The multiple regression analysis and path analysis in each dominant area of noise source are conducted to analyze the relationship between dependent variables like annoyance and independent ones such as noise and non-noise factors. The multiple regression analysis shows that impact of noise factors is the highest to annoyance in dominant areas of road traffic and railway noise. Meanwhile, impact of non-noise factors such as sensitivity and satisfaction of environment on annoyance is also high in these areas. The path analysis result for multivariate analysis between various independent and dependent variables is similar to that of the multiple regression analysis. However, noise factor is the greatest factor influent on annoyance in the dominant areas of the combined noise, and relationship between annoyance and sensitivity is the highest in combined area exposed to road traffic noise and railway noise.

도로배수 취약구간의 개선방안에 대한 연구 (A study of Improvement on the Road Drainage Poor Site)

  • 이만석;김흥래;이경하;강민수;송민태
    • 한국도로학회논문집
    • /
    • 제13권2호
    • /
    • pp.125-131
    • /
    • 2011
  • 본 연구는 도로 운영시 강우로 인하여 발생하는 배수 취약구간에 대하여 현장 조사를 통하여 도로 배수 취약구간의 발생 원인을 과학적이고 구체적으로 규명하는데 목적이 있다. 도로 배수 취약구간의 발생 원인을 규명하기 위하여 배수취약구간에 대한 기존 연구결과 및 현황 자료를 검토하였으며, 도로 노면 배수시설과 도로 인접지 배수시설에 대한 취약구간을 조사 및 분석한 결과, 시공 및 기타의 원인으로 발생한 배수 취약구간이 45.7%, 도로의 기하구조가 원인이 된 배수 취약구간은 32.3%, 도로의 수리 수문의 원인은 22.0%로 분석되었으며, 분석된 원인 별 개선 방안으로서 i)시공 및 기타 부분에서는 토사측구의 재료 변경, 단면의 크기 상향 및 수리학적 근거를 바탕으로 한 용량의 산정을, ii)도로의 기하구조 측면에서는 편경사 및 종단선형을 고려한 합성경사의 도출 및 범위 산정과 종단 오목부 구간의 배수구조물 적정 간격의 제시를, iii)도로의 수리 수문 측면에서는 1분단위 강우강도식의 사용과 노면 강우의 부등류 흐름 해석 기법의 적용과 선형 배수방식에 따른 도로 노면 강우의 신속배제를 개선 방안으로 제안하였다.

랜덤 포레스트와 칼라 코렐로그램을 이용한 도로추출 (Road Extraction Based on Random Forest and Color Correlogram)

  • 최지혜;송광열;이준웅
    • 제어로봇시스템학회논문지
    • /
    • 제17권4호
    • /
    • pp.346-352
    • /
    • 2011
  • This paper presents a system of road extraction for traffic images from a single camera. The road in the images is subject to large changes in appearance because of environmental effects. The proposed system is based on the integration of color correlograms and random forest. The color correlogram depicts the color properties of an image properly. Using the random forest, road extraction is formulated as a learning paradigm. The combined effects of color correlograms and random forest create a robust system capable of extracting the road in very changeable situations.

노인용 보행보조기의 안전성 향상을 위한 노면 상태 및 기울기 추정 (Estimation of Road Surface Condition and Tilt Angle to Improve the Safety of Mobility Aids for the Elderly)

  • 박기동;김종화;최진규
    • 대한임베디드공학회논문지
    • /
    • 제17권3호
    • /
    • pp.149-155
    • /
    • 2022
  • This paper proposes a method for estimating the road surface condition and tilt angle using an inertial measurement unit (IMU) to improve the safety in the use of mobility aids for the elderly. The measurements of the accelerometers of the IMU usually include the accelerations caused by not only the gravitational force but also linear and rotational motions. Thus, the gravitational accelerations are first extracted using several physical constraints and then incorporated into the Kalman filter to estimate the tilt angle. In addition, because the magnitudes of the accelerations produced by the rotational motions (roll and pitch motions) vary with the road surface condition, a criterion based on such accelerations is presented to classify the condition of the road surface. The obtained road surface condition and tilt angle are finally combined to provide the safety information (e.g., safe, warning, and danger) for the user to improve the walking safety. Experiments were carried out and the results showed that the proposed method can provide the condition of the road surface, the tilt of the road surface, and the safety information correctly.

SAR 영상에서 MRF 기반 도로 검출에 관한 연구 (A Study on Road Detection Based on MRF in SAR Image)

  • 김순백;김두영
    • 융합신호처리학회논문지
    • /
    • 제2권2호
    • /
    • pp.7-12
    • /
    • 2001
  • 본 논문에서는 스페클 노이즈를 포함하는 SAR 영상에서 도로망과 같은 선형 구조를 검출하기 위하여 하이브리드 특징 검출 방법을 사용하였다. 먼저 국소적으로 이웃한 영역에 대하여 평균 밝기 비율 또는 통계적 특성을 고려하여 국소적 에지를 검출하였고, 도로에 대한 많은 정보를 위하여 양 검출기로부터 검출된 응답을 결합하였으며, 결합된 에지 세그먼트 중 도로에 일치하는 세그먼트를 결정하고, 연결하여 완전한 도로망을 검출하였다. 본 논문에서 도로망의 검출 방법으로 도로에 대한 일반적인 사전 지식을 MRF 모델로 정의하고, 제안한 세그먼트의 상호 작용 포인터 프로세서에 의한 에너지 함수를 최적화하여 도로망을 검출하였다.

  • PDF

연료전지를 이용하는 비도로용 자동차를 위한 전력변환시스템에 관한 연구 (A Study on the Power Conditioning System for the Fuel Cell Powered Off-Road Vehicle)

  • 강호현;김왕래;최우진;전희종
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2005년도 전력전자학술대회 논문집
    • /
    • pp.343-346
    • /
    • 2005
  • In this paper a power conditioning system suitable for the fuel cell powered off-road vehicle is proposed. The proposed system employs a Proton Exchange Membrane Fuel Cell stack combined with boost converter, a super capacitor module combined with hi-directional buck-boost converter, a 4-quadrant DC chopper and a permanent magnet DC motor. The momentary overload condition occurring during the motor starting is handled by the energy stored in the supercapacitor module. Also, the regenerative energy can be stored in the supercapacitor module by operating the system in either buck or boost mode. This capability gives the system designer the higher flexibility in designing the system and assures the lower cost of the system. The validity and feasibility of the proposed system is proven by the computer simulation.

  • PDF