• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.452-461
• /
• 2003

The effect of initial combined load on the lateral free vibration of arches is investigated. For the analysis, P-M interaction own for the arches are obtained. The arches are circular arches which have constant cross-section and simply supported. Also, the arches are subjected both radial uniform distributed load which results in an axial compression on the cross-section and end moments that cause uniform bending action at the same time. All analysis are performed by finite element method based on Kang and Yoo's curved beam theory.

• Steel and Composite Structures
• /
• 제37권5호
• /
• pp.533-549
• /
• 2020

Recently, Concrete-filled double skin steel tubular (CFDST) columns have proven an exceptional structural resistance in terms of strength, stiffness, and ductility. However, the resistance of these column members can be severely affected by the type of loading in which bending stresses increase in direct proportion with axial load and eccentricity value. This paper presents a non-linear finite element based modeling approach that studies the behavior of slender CFDST columns under biaxial loading. Finite element models were calibrated based on the outcomes of experimental work done by other researchers. Results from simulations of slender CFDST columns under axial loading eccentric in one direction showed good agreement with the experimental response. The calibrated models are expanded to a total of thirty models that studies the behavior of slender CFDST columns under combined compression and biaxial bending. The influences of parameters that are usually found in practice are taken into consideration in this paper, namely, eccentricity-to-diameter (e/D) ratios, slenderness ratios, diameter-to-thickness (D/t) ratios, and steel contribution ratios. Finally, an analytical study based on current code provisions is conducted. It is concluded that South African national standards (2011) provided the most accurate results contrasted with the Eurocode 4 (2004) and American Institute of Steel Construction (2016) that are found to be conservative. Accordingly, correction factors are proposed to the current design guidelines to provide more satisfactory results.

• 한국강구조학회 논문집
• /
• 제18권3호
• /
• pp.301-310
• /
• 2006

면외로 적절히 구속되어 있는 아치의 극한강도는 소성 휨모멘트와 면내 연구는 압축력을 받는 고정지점 포물선 아치의 면내 좌굴 거동과 강도에 관한 연구를 수행하고, 압축력과 휨모멘트를 받는 고정지점 포물선 아치로 연구를 확장하였다. 본 연구 결과 한계 세장비를 제안하여 아치의 좌굴 모드를 구분하는 방법을 제안하였으며, 직선기둥의 좌굴곡선을 이용하여 압축력을 받는 고정지점 포물선 아치의 극한하중을 평가하였다. 마지막으로 직선 부재의 보-기둥 연성식을 수정하여 고정지점을 갖는 포물선 아치에 적용하였다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.151-164
• /
• 2021

During the pipe forming process, a steel plate undergoes inelastic behavior multiple times under a load condition repeating tension and compression in the circumferential direction. It derives local reduction or increase of yield strength within the thickness of steel pipes by the plastic hardening and Bauschinger effect. In this study, a combined hardening model is proposed to effectively predict variations of yield strength in the circumferential direction of API-X65 and X70 steel pipes with relatively low t/D ratio during the forming process, which is expected to experience accumulated plastic strain of 2~3%, the typical Lüder band range in a low-carbon steel. Cyclic tensile tests of API-X65 and X70 steels were performed, and the parameters of the proposed model for the steels were calibrated using the test results. Bending-flattening tests to simulate repeated tension and compression during pipe forming were followed for API-X65 and X70 steels, and the results were compared with those by the proposed model and Zou et al. (2016), in order to verify the process of material model calibration based on tension-compression cyclic test, and the accuracy of the proposed model. Finally, parametric analysis for the yield strength of the steel plate in the circumferential direction of UOE pipe was conducted to investigate the effects of t/D and expansion ratios after O-forming on the yield strength. The results confirmed that the model by Zou et al. (2016) underestimated the yield strength of steel pipe with relatively low t/D ratio, and the parametric analysis showed that the t/D and expansion ratio have a significant impact on the strength of steel pipe.

• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.379-389
• /
• 2018

In this research, the explicit closed-form local buckling solution of steel plates in contact with concrete, with both loaded and unloaded edges elastically restrained against rotation and subjected to eccentric compression is presented. The Rayleigh-Rize approach is applied to establish the eigenvalue problem for the local buckling performance. Buckling shape which combines trigonometric and biquadratic functions is introduced according to that used by Qin et al. (2017) on steel plate buckling under uniform compression. Explicit solutions for predicting the local buckling stress of steel plate are obtained in terms of the rotational stiffness. Based on different boundary conditions, simply yet explicit local buckling solutions are discussed in details. The proposed formulas are validated against previous research and finite element results. The influences of the loading stress gradient parameter, the aspect ratio, and the rotational stiffness on the local buckling stress resultants of steel plates with different boundary conditions were evaluated. This work can be considered as an alternative to apply a different buckling shape function to study the buckling problem of steel plate under eccentric compression comparing to the work by Qin et al. (2018), and the results are found to be in consistent with those in Qin et al. (2018).

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.135-149
• /
• 2017

The prediction of the actual ultimate capacity of confined concrete columns requires partial confinement utilization under eccentric loading. This is attributed to the reduction in compression zone compared to columns under pure axial compression. Modern codes and standards are introducing the need to perform extreme event analysis under static loads. There has been a number of studies that focused on the analysis and testing of concentric columns. On the other hand, the augmentation of compressive strength due to partial confinement has not been treated before. The higher eccentricity causes smaller confined concrete region in compression yielding smaller increase in strength of concrete. Accordingly, the ultimate eccentric confined strength is gradually reduced from the fully confined value $f_{cc}$ (at zero eccentricity) to the unconfined value $f^{\prime}_c$ (at infinite eccentricity) as a function of the ratio of compression area to total area of each eccentricity. This approach is used to implement an adaptive Mander model for analyzing eccentrically loaded columns. Generalization of the 3D moment of area approach is implemented based on proportional loading, fiber model and the secant stiffness approach, in an incremental-iterative numerical procedure to achieve the equilibrium path of $P-{\varepsilon}$ and $M-{\varphi}$ response up to failure. This numerical analysis is adapted to assess the confining effect in rectangular columns confined with conventional lateral steel. This analysis is validated against experimental data found in the literature showing good correlation to the partial confinement model while rendering the full confinement treatment unsafe.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.235-245
• /
• 2007

선체의 갑판부와 선저부 그리고 해양구조물의 기본적인 구조는 보강판이다. 보강판넬은 한쪽방향으로 위치한 보강재 혹은 종/횡 방향으로 복잡하게 위치한 구조를 이루고 있으며, 후자의 모델을 그릴리지 구조라고 부른다 선체구조설계 단계에서 선박의 종강도 평가는 가장 중요한 항목이다. 일반적으로, 극심한 해상상태에 놓인 선박의 선저부에는 호깅조건에 의해 발생되는 횡모멘트에 기인하여 압축하중이 작용하게 되며, 이와 동시에 수압하중 작용으로 인한 국부휭모멘트가 작용된다. 본 논문에서는, 구조해석 결과의 검증을 위해서 여러 가지 해석프로그램 및 현재 사용되고 있는 선급룰과의 비교를 하여 횡하중의 영향에 따른 압축최종강도에 대해 분석하고, 여러 가지 설계변수를 변화하여, 각각의 영향을 검토하고, 최종적으로 조합하중 조건에서의 횡하중의 영향에 대해서 분석하였다. 본 연구에서 얻어진 결과들은 최종한계상태설계법에 기반을 두고, 조합하중이 작용하는 선체보강판의 구조강도 거동에 대해서 하중성분에 대한 관계를 고찰하였다.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.819-825
• /
• 2006

본 연구의 목적은 휨과 전단에 지배받는 철근콘크리트 보에서 아치작용에 의한 전단기여성분을 평가하기 위한 새로운 해석 모델의 적용성을 검증하기 위한 것이다. 새로운 모델은 전단력은 휨모멘트의 변화율이라는 관계식을 기초로, 분산트러스 이상화 기법을 이용하여 횡단면에서 베르누이(Bernoulli) 휨 평면으로부터 전단변형적합조건을 새롭게 유도하였으며, MCFT와 분산트러스 이상화를 통해 전단흐름에 의한 복부전단요소의 전단곡률을 일치시키는 전단변형적합조건을 수립하였다. 전단변형적합조건을 이용하면, 보 전단거동은 타이드아치작용과 보작용의 두 성분으로 수치적 분해 될 수 있다. 이러한 분리 접근법의 유효성은 기존 문헌에 수록된 활용 가능한 실험 자료를 통해 검증하였다. 수행 결과 실제 측정 전단강도와 비교하였을 때 복부가 분담하는 전단강도는 훨씬 일정하며, 역학적 복부철근비와 훌륭한 선형 상관관계에 있는 것으로 나타났다. 새로운 해석 모델은 철근콘크리트 부재의 전단 거동에 영향을 미치는 각 변수나 메커니즘을 합리적으로 설명할 수 있는 모델이라고 할 수 있겠다.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.129-144
• /
• 2013

Load-carrying capacity of combined members consisted of inner and sleeved tubes subjected to axial compression was investigated in this paper. Considering the initial bending of the inner tube and perfect elasto-plasticity material model, structural behavior of the sleeved member was analyzed by theoretic deduction, which could be divided into three states: the elastic inner tube contacts the outer sleeved tube, only the inner tube becomes plastic and both the inner and outer sleeved tubes become plastic. Curves between axial compressive loads and lateral displacements of the middle sections of the inner tubes were obtained. Then four sleeved members were analyzed through FEM, and the numerical results were consistent with the theoretic formulas. Finally, experiments of full-scale sleeved members were performed. The results obtained from the theoretical analysis were verified against experimental results. The compressive load-lateral displacement curves from the theoretical analysis and the tests are similar and well indicate the point when the inner tube contacts the sleeved tube. Load-carrying capacity of the inner tube can be improved due to the sleeved tube. This paper provides theoretical basis for application of the sleeved members in reinforcement engineering.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.79-91
• /
• 2005

본 논문에서는 프리스트레스를 이용한 가시설 공법(IPS)에 적용되는 띠장의 거동의 해석 및 설계절차에 대한 연구를 수행하였다. 띠장에 초기장력이 도입되는 구조계는 탄성지반위에 놓인 보이론에 의하여 부재력이 산출되고, 토압에 의한 부재력은 장력을 부정정력으로 취하여 부정정 구조해석을 통하여 띠장의 축력 및 휨모멘트를 계산하였다. 지반은 압축력 전담요소, 케이블은 인장력 전담요소를 사용하여 등분포 토압 및 편토압을 받는 띠장의 전산해석을 수행하였다. 기존의 가시설 설계에 적용되는 토압을 적용하여 IPS 띠장설계를 실시하였고, 긴장력과 설계토압에 의한 축력과 휨모멘트를 계산하여 축응력과 휨응력을 도출하고 합성응력검토를 수행하였다.