• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.532-538
• /
• 1998

한국산 천연베릴을 잉요하여 온도구배융제환류법에 의해 에메랄드($3BeO{\cdot}Al_2O_3{\cdot}6SiO_2:Cr^{3+}$) 단결정이 성장되었다. 리튬-몰리브데늄-바나디움 산화물계 융제는 $(MoO_3+V_2O_5)/Li_2O$, 와 $V_2O_5-Li_2O$를 서로 다르게 용융한 2종류의 융제를 혼합하여 제조하였다. 융제의 최적 조성은 산화몰리브데늄.바나디움에 대한 산화리튬의 몰비($(MoO_3+V_2O_5)/Li_2O$)가 3몰이었고 융제첨가제는 Li2O량에 대하여 $K_2O$ 또는 $Na_2O$를 0.2mole% 이내로 치환하였다. 베릴원료의 용융 농도는 융제량에 대하여 3~10% 함량이었고, $Cr_2O_3$ 발색제는 베릴량에 대하여 1%이었다. 융액은 용융, 성장, 회수 블록으로 나뉘어진 3지대 온도구배 결정성장로에서, $1100^{\circ}C$와 $1000^{\circ}C$ 사이의 안정상태에서 연속적으로 순환되도록 하였다. 에메랄드 단결정은 성장지대에서 950~$1000^{\circ}C$ 구간에서 1일 1회 2시간동안 열진동 처리하였을 때 미소핵의 생성이 억제된 대형 단결정을 성장시킬 수 있었다. 육각주상 에메랄드 단결정의 우선성장방향은 c(0001) 바닥면이었고, m(1010) 기둥면에 수직이었다.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1356-1361
• /
• 2004

High temperature superconducting coated conductor has a structure of ///. The buffer layer consists of multi-layer, this study reports the deposition method and optimal deposition conditions of YSZ(Yttria-stabilized zirconia) layer which plays a important part in preventing the elements of substrate from diffusing into the superconducting layer. YSZ layer was deposited by DC reactive sputtering technique using water vapor for oxidizing deposited elements on substrate. To investigate optimal thickness of YSZ film, four YSZ/CeO$_2$/Ni samples with different YSZ thickness(130 nm, 260 nm, 390 nm, and 650 nm) were prepared. The SEM image showed that the surface of YSZ layer was getting to be rougher as YSZ layer was getting thicker and the growth mode of YSZ layer was columnar grain growth. After CeO$_2$ layer was deposited with the same thickness of 18.3 nm on each four samples, YBCO layer was deposited by PLD method with the thickness of 300 nm. The critical currents of four samples were 0, 6 A, 7.5 A, and 5 A respectively. This shows that as YSZ layer is getting thicker, YSZ layer plays a good role as a diffusion barrier but the surface of YSZ layer is getting rougher.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.220-229
• /
• 1992

The degree of purification and the macrostructure of high purity aluminium were studied through the alternate stirring method in order to improve the nonuniformity of solute concentration in the unidirectional stirring method. The $2^3$ factorial design was done to examine the effects of experimental factors more qualitatively. In the relatively low stirring speed of 1500 rpm with alternate stirring mode, the uniform solute profile and refined grain structure were obtained due to strong washing effect and turbulent fluid flow. It was induced by the transition of the momentum boundary layer by alternation of the stirrer. It was concluded from this study that the alternate stirring mode was more effective to obtain the uniformity of solute even in the stirring speed of 1500 rpm. But the degree of purification decreased below the critical alternating period. When 2N(99.8wt.%) aluminium was used as the starting material the morphology of solid-liquid showed the cellular shape and the columnar grains were inclined to the direction of rotation. This inclined grain growth resulted from the difference of relative velocities of solid and liquid. The inclined angle was increased as the stirring speed increased and solidification proceeded. In the case of 4N aluminium, there was no inclined grain growth and it was confirmed from the macrostructure and SEM work that the morphology of solid-liquid interface was planar. From the factorial design, it was found that the alternate stirring mode showed poorer purification effect than that of unidirectional stirring mode at low speed(500 rpm). In addition, the factor that had the most significant effect on the degree of purification was the stirring speed.

• 한국주조공학회지
• /
• 제23권5호
• /
• pp.276-285
• /
• 2003

In the undercooled melt of $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy, the solidification behavior including nucleation and growth of crystals at the micrometer level has been observed in-situ by use of a confocal scanning laser microscope combined with an infrared image furnace. The $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy specimens were cooled from the liquid state to glass transition temperature. 575 K, at various cooling late under a helium gas flow. According to the cooling rate, the morphologies of the solidification front are changed among various types, irregular jog like front, columnar dendritic front, cellular grain, star like shape jog and fine grain, etc. The velocities of the solid-liquid interface are measured to be $10^{-5}{\sim}10^{-8}$ m/s which are at least two orders higher than the theoretical crystal growth rates. Combining the morphologies observed in terms of cooling rates and their solidification behaviors, we conclude that phase separation takes place in the undercooled molten $Pd_{40}Cu_{30}Ni_{10}P_{20}$ alloy. The continuous cooling transformation (CCT) diagram was constructed from solidification onset time at various linear cooling conditions with different rate. The CCT diagram suggests that the critical cooling rate for glassy solidification is about 1.5 K/s, which is in agreement with the previous calorimetric findings.

• 한국분말재료학회지
• /
• 제28권3호
• /
• pp.216-220
• /
• 2021

The effect of tert-butyl alcohol (TBA) as a freezing solvent on the pore structure of a porous tungsten body prepared by freeze-drying is analyzed. TBA slurries with a WO3 content of 10 vol% are prepared by mixing with a small amount of dispersant and binder at 30℃. The slurries are frozen at -25℃, and pores are formed in the frozen specimens by the sublimation of TBA during drying in air. After hydrogen reduction at 800℃ and sintering at 1000℃, the green body of WO₃ is completely converted to porous W with various pore structures. Directional pores from the center of the specimen to the outside are observed in the sintered bodies because of the columnar growth of TBA. A decrease in pore directionality and porosity is observed in the specimens prepared by long-duration drying and sintering. The change in pore structure is explained by the growth of the freezing solvent and densification.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.255-262
• /
• 2003

본 논문에서는 FBAR(film bulk acoustic wave resonator) 필터 응용을 위해 Al 하부전극 상에서 RF magnetron sputtering 기술을 이용한 ZnO 박막 증착 및 공정온도가 ZnO 결정성장에 미치는 영향에 대한 연구결과를 발표한다 ZnO 박막의 압전특성은 FBAR 소자의 공진특성을 결정하는 가장 중요한 요소이고 압전성은 증착된 ZnO박막의 c축 우선배향성의 정도에 의해 결정된다는 사실을 고려한다면 ZnO 결정성장에 미치는 공정온도에 관한 연구는 매우 의미 있는 일이다. 본 실험을 통하여 ZnO 박막의 성장특성은 상온에서부터 35$0^{\circ}C$까지의 실험조건에서 c축 우선배향성의 정도에 따라 RF power에 관계없이 온도를 2개의 임계온도에 의해 나눠진 3개의 온도구간으로 구분할 수 있었다. 결과적으로 20$0^{\circ}C$ 이하의 공정온도에서는 주상형 결정립을 가진 c축 우선배향의 ZnO 박막을 얻을 수 있었다. 이렇게 얻은 ZnO박막을 사용하여 FBAR 다층박막 구조를 구현하였다.

• 한국정보통신학회논문지
• /
• 제10권9호
• /
• pp.1663-1670
• /
• 2006

펄스 전기증착법에 의해 단결정 Fe 박막을 n-Si(111) 기판위에 직접 성장시켰다. CV 분석 을 통해 $Fe^{2+}n-Si(111)$ 계면은 쇼트키 장벽 형성에 따른 다이오드 특성을 가진다는 사실을 알 수 있었다. 또한 인가 전압에 따른 전기용량의 변화를 보여주는 Mott-Schottky chottky(MS) 관계식을 이용하여 전해질 내에서 n-Si(111) 기판의 flat-band potential(EFB)을 조사하였으며, 0.1M $FeCl_2$ 전해질 내에서 EFB와 산화-환원 전위는 각각 -0.526V 과 -0.316V 임을 알 수 있었다. Fe/n-Si(111) 계면반응 시, Fe 증착 초기 단계에서의 핵 형성과 성장 운동학은 과도전류 특성을 이용하여 조사하였으며, 과도전류 특성을 통해 Fe 박막의 성장모드는 "instantaneous nucleation and 3-dimensional diffusion limited growth"임을 알 수 있었다. 주파수가 300Hz, 최대 전압이 1.4V인 펄스 전압을 이용하여 n-Si(111) 기판위에 Fe를 직접 전기 증착 시켰으며, 형 성 된 Fe 박막은 단결정 ${\alpha}-Fe$로 Si 기판위에 ${\alpha}-Fe(110)/Si(111)$의 격자 정합성을 가지고 성장하였음을 XRD 분석을 통해 확인하였다.

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.56-62
• /
• 2003

졸-겔법을 이용하고 금속 나프테네이트를 출발원료로 사용하여 $SrTiO_3$(100), $LaA1O_3$(100) 및 MgO(100) 기판 위에 에피탁샬 $Bi_4Ti_3O_{12}$ 박막을 제조하였다. 코팅된 전구막은 $500^{\circ}C$에서 10분간 전열처리 하였고, $750^{\circ}C$에서 30분간 최종 열처리를 행하였다. 박막의 결정화도는 X-선회절 분석법 ($\theta$-2$\theta$ 스캔과 $\beta$ 스캔)으로 조사하였고, 표면 미세구조와 거칠기를 field emission-scanning electron microscope와 atomic force microscope를 이용하여 각각 분석하였다. MgO(100) 기판 위에 제조한 박막은 모든 기판 중에서 가장 낮은 결정화도와 면내 배향성을 보였다. 가장 낮은 결정화도와 배향성을 보인 MgO(100) 기판위의 박막은 침상 형태로 성장한 반면, 결정성과 배향성이 좋은 $LaA1O_3$(100)과 $SrTiO_3$(100) 기판위의 박막들은 원형의 입자 성장 형태를 보이고 있었다.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.97-102
• /
• 2012

The microstructure and tensile properties of Al-Mn/Al-Si hybrid aluminum alloys prepared by electromagnetic duocasting were investigated. Only the Al-Mn alloy showed the typical cast microstructure of columnar and equiaxed crystals. The primary dendrites and eutectic structure were clearly observed in the Al-Si alloy. There existed a macro-interface of Al-Mn/Al-Si alloys in the hybrid aluminum alloys. The macro-interface was well bonded, and the growth of primary dendrites in Al-Si alloy occurred from the macro-interface. The Al-Mn/Al-Si hybrid aluminum alloys with a well-bonded macro-interface showed excellent tensile strength and 0.2% proof stress, both of which are comparable to those values for binary Al-Mn alloy, indicating that the strength is preferentially dominated by the deformation of the Al-Mn alloy side. However, the degree of elongation was between that of binary Al-Mn and Al-Si alloys. The Al-Mn/Al-Si hybrid aluminum alloys were fractured on the Al-Mn alloy side. This was considered to have resulted from the limited deformation in the Al-Mn alloy side, which led to relatively low elongation compared to the binary Al-Mn alloy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.55.1-55.1
• /
• 2010

Cost efficient and large area deposition of superior quality $Al_2O_3$ doped zinc oxide (AZO) films is instrumental in many of its applications including solar cell fabrication due to its numerous advantages over ITO films. In this study, AZO films were prepared by a highly efficient rotating cylindrical dc magnetron sputtering system using AZO target, which has a target material utilization above 80%, on glass substrates in argon ambient. A detailed analysis on the electrical, optical and structural characteristics of AZO thin films was carried out for solar cell application. The properties of films were found to critically depend on deposition parameters such as sputtering power, substrate temperature, working pressure, and thickness of the films. A low resistivity of ${\sim}5.5{\times}10-4{\Omega}-cm$ was obtained for films deposited at 2kW, keeping the pressure and substrate temperature constant at 3 mtorr and $230^{\circ}C$ respectively, mainly due to an increase in carrier mobility and large grain size which would reduce the grain boundary scattering. The increase in carrier mobility with power can be attributed to the columnar growth of AZO film with (002) preferred orientation as revealed by XRD analysis. The AZO films showed a high transparency of>87% in the visible wavelength region irrespective of deposition conditions. Our results offers a cost-efficient AZO film deposition method which can fabricate films with significant low resistivity and high transmittance that can find application in thin-film solar cells.