• Title/Summary/Keyword: columnar growth

Search Result 123, Processing Time 0.028 seconds

catalyst-free 유기금속 화학증착법을 이용한 InN nanorods의 성장

  • Kim, Min-Hwa;Hong, Yeong-Jun;Jeong, Geon-Uk;Park, Seong-Hyeon;Lee, Geon-Hun;Mun, Dae-Yeong;Jeon, Jong-Myeong;Kim, Mi-Yeong;Lee, Gyu-Cheol;Yun, Ui-Jun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.126-126
    • /
    • 2010
  • 본 연구에서는 catalyst-free 유기금속 화학증착법 (MOCVD)를 이용하여 사파이어 (0001)면 위에 직접 InN nanorods를 성장하였다. InN 박막의 성장에서 TMIn과 $NH_3$를 전구체로 사용하였으며, 캐리어 가스로는 질소를 사용하였다. 성장 전, 기판에 $1100^{\circ}C$에서 3분간 nitridation 처리를 거친 후 온도를 낮춰 $630{\sim}730^{\circ}C$의 온도범위 에서 InN 박막을 성장하였다. 이때 $710^{\circ}C$의 온도에서 박막은 columnar growth의 특성을 보였으며 동일조건에서 80분간 성장시킨 결과 InN nanorods가 성장되었다. 성장시킨 InN nanorod는 X-선 회절 측정법, 주사 전자 현미경 그리고 투과 전자 현미경을 이용하여 그 특성을 분석하였다. 투과 전자 현미경을 통한 분석결과 지름이 150~200 nm이며 그 길이는 수 ${\mu}m$인 InN nanorod가 성공적으로 성장되었음을 확인하였다. 또한 X-선 회절 측정법과 주사 전자 현미경을 통한 분석에서 이들 nanorods가 대부분 c 방향으로 수직하게 정렬되어 있음을 확인하였다. 또한 Ti/Au (120/80 nm)를 전극으로 사용하여 개개의 nanorod의 전기적 특성을 분석한 결과 linear한 I-V특성이 관찰되었으며 비저항은 평균적으로 $0.0024\;{\Omega}cm$ 이었다. transfer 특성의 측정결과 -50V까지 게이트 전압을 인가하여도 드레인 전류의 변화는 매우 적어 doping level이 상당히 높다고 예상가능하다. 또한 mobility는 $133\;cm^2/Vs$로 도출되었다.

  • PDF

A Study on the Debinding Process of High Purity Alumina Ceramic Fabricated by DLP 3D Printing (DLP 3D 프린팅으로 제작된 고순도 알루미나 세라믹 탈지 공정 연구)

  • Lee, Hyun-Been;Lee, Hye-Ji;Kim, Kyung-Ho;Ryu, Sung-Soo;Han, Yoonsoo
    • Journal of Powder Materials
    • /
    • v.27 no.6
    • /
    • pp.490-497
    • /
    • 2020
  • The 3D printing process provides a higher degree of freedom when designing ceramic parts than the conventional press forming process. However, the generation and growth of the microcracks induced during heat treatment is thought to be due to the occurrence of local tensile stress caused by the thermal decomposition of the binder inside the green body. In this study, an alumina columnar specimen, which is a representative ceramic material, is fabricated using the digital light process (DLP) 3D printing method. DTG analysis is performed to investigate the cause of the occurrence of microcracks by analyzing the debinding process in which microcracks are mainly generated. HDDA of epoxy acrylates, which is the main binder, rapidly debinded in the range of 200 to 500℃, and microcracks are observed because of real-time microscopic image observation. For mitigating the rapid debinding process of HDDA, other types of acrylates PETA, PUA, and MMA are added, and the effect of these additives on the debinding rate is investigated. By analyzing the DTG in the 25 to 300℃ region, it is confirmed that the PETA monomer and the PUA monomer can suppress the rapid decomposition rate of HDDA in this temperature range.

Bias Voltage Dependence of Magnetic Tunnel Junctions Comprising Double Barriers and CoFe/NiFeSiB/CoFe Free Layer (CoFe/NiFeSiB/CoFe 자유층을 갖는 이중장벽 자기터널접합의 바이어스전압 의존특성)

  • Lee, S.Y.;Rhee, J.R.
    • Journal of the Korean Magnetics Society
    • /
    • v.17 no.3
    • /
    • pp.120-123
    • /
    • 2007
  • The typical double-barrier magnetic tunnel junction (DMTJ) structure examined in this paper consists of a Ta 45/Ru 9.5/IrMn 10/CoFe7/$AlO_x$/free layer/AlO/CoFe 7/IrMn 10/Ru 60 (nm). The free layer consists of an $Ni_{16}Fe_{62}Si_8B_{14}$ 7 nm, $Co_{90}Fe_{10}$ (fcc) 7 nm, or CoFe $t_1$/NiFeSiB $t_2$/CoFe $t_1$ layer in which the thicknesses $t_1$ and $t_2$ are varied. The DMTJ with an NiFeSiB-free layer had a tunneling magnetoresistance (TMR) of 28%, an area-resistance product (RA) of $86\;k{\Omega}{\mu}m^2$, a coercivity ($H_c$) of 11 Oe, and an interlayer coupling field ($H_i$) of 20 Oe. To improve the TMR ratio and RA, a DMTJ comprising an amorphous NiFeSiB layer that could partially substitute for the CoFe free layer was investigated. This hybrid DMTJ had a TMR of 30%, an RA of $68\;k{\Omega}{\mu}m^2$, and a of 11 Oe, but an increased of 37 Oe. We confirmed by atomic force microscopy and transmission electron microscopy that increased as the thickness of NiFeSiB decreased. When the amorphous NiFeSiB layer was thick, it was effective in retarding the columnar growth which usually induces a wavy interface. However, if the NiFeSiB layer was thin, the roughness was increased and became large because of the magnetostatic $N{\acute{e}}el$ coupling.

Structural properties of Pd-barium zirconate dense membrane synthesized by dual sputtering method (동시 증착 스퍼터링 공정에 의해 증착된 Pd-barium zirconate membrane의 구조분석)

  • Byeon, Myeong-Seop;Kang, Eun-Tae;Cho, Woo-Seok;Kim, Jin-Ho;Hwang, Kwang-Taek
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.22 no.1
    • /
    • pp.19-24
    • /
    • 2012
  • Barium zirconate exhibits good thermo-chemical stability and proton conduction at high temperatures, but shows poor electron conductivity. Therefore, for high efficiency of hydrogen separation, a very thin and dense Pd-Barium zirconate membrane has to be coated on a porous substrate. A thin and dense Pd-Barium zirconate membrane was successfully synthesized on a porous substrate by means of dual sputtering method. The structural and chemical features of the $BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membranes sputtered at $300^{\circ}C$ and $400^{\circ}C$ were investigated by X-ray diffractometry, and it was found that a well-crystallized membrane, Pm-3m space group of $BaZrO_3$, was synthesized. The surface and cross-sectional morphologies of membrane were assessed by SEM (scanning electron microscopy) and TEM(transmission electron microscopy) of the surface and of cross sections. The cross sectional observation of Pd-$BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membrane by dual sputtering shows that the coating is quite dense with columnar structure.

Effect of composition on the structural and thermal properties of TiZrN thin film (TiZrN 박막의 조성이 구조적 특성 및 열적 특성에 미치는 영향)

  • Choi, Byoung Su;Um, Ji Hun;Seok, Min Jun;Lee, Byeong Woo;Kim, Jin Kon;Cho, Hyun
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.31 no.1
    • /
    • pp.37-42
    • /
    • 2021
  • The effect of chemical composition on the structural and thermal properties of TiZrN thin films was studied. As the Zr fraction in the deposited TixZr1-xN (x = 0.87, 0.82, 0.7, 0.6, and 0.28) increased, microstructural changes consisted of reduction in the grain size and a gradual transition from columnar structure to granular structure were observed. In addition, it was also confirmed that a gradual crystal phase transition from TiN to TiZrN has occurred as the Zr fraction increased up to 0.4. After heat treatment at 900℃, Ti0.82Zr0.18N and Ti0.7Zr0.3N layers were converted to a form in which rutile phase TiO2 and TiZrO4 oxides coexist, while Ti0.6Zr0.4N layer was converted to TiZrO4 oxide. Among the five compositions of TiZrN films, the Ti0.6Zr0.4N showed the best high temperature stability and produced a significant enhancement in the thermal oxidation resistance of Inconel 617 through suppressing the surface diffusion of Cr caused by thermal oxidation of the Inconel 617 substrate.

A study of the crystallinity and microstructure of the $Si_{1-X}Ge_X$ alloys deposited on the $SiO_2$at various temperatures ($SiO_2$위에 증착된 $Si_{1-X}Ge_X$합금의 증착온도 변화에 따른 결정성 및 미세구조에 관한 연구)

  • Kim, Hong-Seung;Lee, Jeong-Yong;Lee, Seung-Chang;Gang, Sang-Won
    • Korean Journal of Materials Research
    • /
    • v.4 no.4
    • /
    • pp.416-427
    • /
    • 1994
  • The changes of crystallinity and microstructure and the $Si_{1-x}Ge_x/Sio_2$ interfaces of $Si_{1-x}Ge_x$ alloys deposited on amorphous $SiO_{2}$ were studied as a function of deposition temperature. The crystallinity, microstructure, and compositional uniformity of $Si_{1-x}Ge_x$ alloys deposited on the SiOl at different temperature were investigated by X-ray diffraction and transmission electron microscopy. And $Si_{1-x}Ge_x/Sio_2$ interface were investigated by high-resolution transmission electron microscopy. The $Si_{0.7}Ge_{0.3}/Sio_2$ films were deposited on amorphous $SiO_{2}$ at $300^{\circ}C,400^{\circ}C,500^{\circ}C,600^{\circ}C,$ and $700^{\circ}C$ by Si-MBE. In the film deposited at $300^{\circ}C$, only amorphous phase were observed. In the film deposited at $400^{\circ}C$, both amorphous and polycrystalline films were observed. Both phases were deposited simultaneously, but, at initial film growth, amorphous phase prevailed over polycrystalline phase. As the film thickness increased, the fraction of polycrystalline phase increased. At $500^{\circ}C$, thin amorphous layer was observed at lOnm from $SiO_{2}$ surface. In the films deposited at higher than $600^{\circ}C$, only crystalline phase were observed. Polycrystalline films had columnar structure. Compositional uniformity for deposited films were good regardless of deposition temperature. The interfaces of $Si_{1-x}Ge_x/Sio_2$ were flat, whatever polycrystal or amorphous was deposited on $SiO_{2}$.

  • PDF

Ultrastructural Changes in the Mantle of the Equilateral Venus, Gomphina veneriformis (Bivalvia: Veneridae) Exposed to TBTCl (TBTCl 노출에 의한 대복, Gomphina veneriformis (Bivalvia: Veneridae) 외투막의 미세구조적 변화)

  • Park, Jung-Jun;Kim, Seok-Ryel;Park, Myoung-Ae;Lee, Jung-Sick
    • The Korean Journal of Malacology
    • /
    • v.27 no.3
    • /
    • pp.213-221
    • /
    • 2011
  • Equilateral venus, Gomphina veneriformis exposed to tribultyltin chloride (TBTCl) for 36 weeks was showed ultrastructural changes of the mantle. The fine mantle had 4-folds and its epidermal layer consisted of simple columnar epithelial cells and ciliated cells and secretory cells. Inner and outer epidermal layer covered connective tissue. The mantle exposed to TBTCl at 12 weeks was decreased cilia in the inner epidermal layer, and observed extension of the hemolymph sinus and destruction of the septum. At 20 weeks, it revealed vacuole formation and pycnosis in the cytoplasm, and scattered muscular fiber. After 28 weeks of exposure, the mantle revealed partially degenerative changes in the epidermal layer. In the ciliated cells, basal body was isolated from the cilia and rootlet complex and basal foot were scattered. The sarcolemma had debris fiber. At 36 weeks, it observed degenerative cells that it revealed disappearance of the cilia, atrophic nucleus, poorly membrane and destruction of the cresternae in the mitochondria, and increasing heterophagosome. The outer epithelial cell had necrotic nuclus, numeous lysosome and disappearance of the microvilli. Therefore, results of this study suggested that chronical TBTCl exposure in the Gomphina veneriformis induced the disorders of shell growth and physiological function with histopathological changes of the mantle.

Foregut Cyst Communicated with Esophagus, Lined by Bronchial Mucosa -A case report and embryologic base of its maldevelopment- (식도(食道)와 연결(聯結)되고 기관지점막(氣管枝粘膜)으로 덮힌 Foregut낭종(囊腫) -증례보고(症例報告) 및 그 이상생성(異常生成)의 발생학적(發生學的) 고찰(考察)-)

  • Chang, Jae-Chun;Jho, Kil-Ho;Hwang, Mi-Soo
    • Journal of Yeungnam Medical Science
    • /
    • v.1 no.1
    • /
    • pp.139-144
    • /
    • 1984
  • A case of foregut cyst communicated with esophagus and lined by bronchial mucosa is reviewed and its embryologic base of maldevelopment is discussed. It is not always easy to distinguish between digestive and respiratory cyst in mediastinum. There is whole range of intermediate between a cyst with ciliated and one with squamous or columnar mucosa. Origin of this dysembryoplasia is difficult to determine when one consider that the esophagus is covered with ciliated epithelium until the eleventh week of fetal life and that ciliated growth are found on its wall until the sixth month of the fetal life. And we concluded, general agreement is that cysts which have gastric epithelium in whole or in part, represent a distinct type and should be classified as (gastro) enteric cyst, mediastinal cyst containing cartilage were considered definitely as respiratory(bronchial or bronchogenic) cyst.

  • PDF

Notes on Powdery mildew of Ailanthus altissima caused by Phyllactinia corylea (Pers.) Karst (Phyllactinia corylea (Pers.) Karst에 의(依)한 가중나무 흰가루병(病))

  • Kim, Ki Chung
    • Journal of Korean Society of Forest Science
    • /
    • v.4 no.1
    • /
    • pp.9-13
    • /
    • 1965
  • Powdery mildew of Ailanthus altissima Sw. was first reported by J.S. Park in Korea, 1961. According to his report, this disease was found on the leaves of this tree species collected in Jeongup, 1957, and in Taejon, 1958. He described morphological characters of this pathogen and described also that the causal fungus may be closely related with Phyllactinia corylea. This disease which appears dusty grayish yellow molds under surface of leaves was collected again by the author in Kwangju, 1962. The present works were undertaken to make clear the species of causal fungus by means of the morphology and pathogenecity. According to the following results, the pathogen was identified as Phyllactinia corylea (Pers.) Karst. Morphological characters of the fungus Mycelia persistent or more or less evanescent; matured conidia solitary, aseptate, short-clavate to clavate to clavate, hyaline or yellowish, granulate, $44.6-89.2{\times}9.3-24.2{\mu}$, average $64.8-17.8{\mu}$ in size; conidiophores elongate clavate or columnar, hyaline, 2-3 septate, $122.8-346.0{\times}3.7-7.4{\mu}$, average $208.8{\times}6.3{\mu}$; per-thecia usually scattered, rarely gregarious, dark brown to black, depressed globose to globose, $223.2-297.6{\mu}$, average $267.8{\mu}$ in diameter; appendages 12-19, usually 15 in number, hyaline, straight, needle-shaped, sharply pointed at the apex and bulbous at the base, aseptate, $93.0-310.0{\times}5.0-8.0{\mu}$, average $173.3{\times}6.4{\mu}$ in size; asci elongate ellipsoidal to broadly clavate, hyaline, more or less stalked, 8-13 in number, $68.5-76.6{\times}26.1-34.2{\mu}$, average $71.4{\times}29.0{\mu}$ in size; ascospores 2-4, usually 2 in number, hyaline or yellowish, aseptate, ellipsoidal or ovate, $27.7-34.2{\times}14.7-17.9{\mu}$, average $25.5{\times}13.9{\mu}$ in size. Pathogenicity of the fungi In order to make clear the species of the fungus and the pathogenic differences of Phyllactinia fungi which are collected around the contaminated area and seemed to be related to Ailanthus powdery mildew, some inoculation experiments were performed. 1. Cross inoculation to several tree species with their pathogen: Tested materials; Phyllactinia in question on Ailanthus altissima Sw. Ph. fraxini (DC.) Homma. On Alnus firma S. et Z. Ph. moricola (P. Henn.) Homma on morus alba L. According to the results of the experiments, the reactions were all negative with the exception of the original hosts of tested fungi. 2. Inoculation to Picrasma ailanthoides Planch. : The appearance of symptom on the leaves of P. ailanthoides is not distinct, but more or less mycelial growth. Therefore, under the optimal condition in glass chamber, it may be possible to success artificially.

  • PDF

Preparation and Pervaporative Alcohol Dehydration of Crystallographically b/c-axis Oriented Mordenite Zeolite Membranes (결정학적으로 b/c-축 방향으로 배향된 모데나이트 제올라이트 분리막의 제조 및 투과증발 알코올 탈수 거동)

  • Kim, Young-Mu;Lee, Du-Hyoung;Kim, Min-Zy;Cho, Churl-Hee
    • Membrane Journal
    • /
    • v.28 no.5
    • /
    • pp.340-350
    • /
    • 2018
  • In the present study, crystallographically b- and c-axis oriented mordenite zeolite membranes were prepared and their pervaporative ethanol dehydration was investigated. The seed layer with a high coverage grew to be c-axis oriented dense layer, while the seed layer with a low coverage grew to be b-axis oriented layer. This phenomenon could be explained by the evolutionary selection growth mechanism. The b-axis grown membrane with 8-membered rings showed a high separation factor of above 1000 and a considerable total flux of around $0.2kg/m^2h$. The c-axis grown, columnar structured membrane with 8- and 12-membered rings showed a low separation factor of less than 200 and a relatively high total flux of around $0.25kg/m^2h$. The high performance of b-axis grown membrane was due to the relatively small opening of 8-membered rings. Water molecules can freely permeate through the openings, but ethanol molecules, difficultly. Therefore, in the present study, we introduced a new method to control crystallographic orientation of mordenite membrane by changing seeding amount of needle-like crystals, and elucidated that b-axis oriented mordenite membrane showed better performance than c-axis grown mordenite membrane.