• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.289-293
• /
• 2002

This study was conducted to investigate changes of pH, meat color, cooking loss, shear force and sensory evaluation on Hanwoo meat fed with supplemental fig fermentation(SFF) during storage period. A total of 10 Hanwoo bulls were subjected to one of two treatment diets (control and 10% SFF) from live weight of 400kg far 6 months. After slaughter, longissimus muscles were removed, zipper-wrapped and stored at 4$\^{C}$ for 21 days. The pH, meat color, cooking loss, shear force and sensory evaluation of the samples were measured at 1, 3, 9, 15, 21 days of storage. There were no differences in pH, meat objective color(Hunter L, a and b) and cooking loss (%) of longissimus muscles between control and SFF treatment during storage. Shear force values of longissimus muscle from SFF treatment showed lower level in 1, 3 and 9 days and tended to decrease during storage. No differences in odor and appearance of sensory evaluation were observed between control and SFF treatment during storage. The taste induced by SFF was increased(f<0.05) at 1, 3 and 9 days of storage. These results indicate that the SFF may improve meat quality of Hanwoo during storage.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2004

This study was conducted to investigate novel genetic variations of MCIR^*3 allele. In general, white spotting or white belt on a black backgroud in pigs is determined by the E$^p$ allele at the MCIR/Extention locus. E$^p$ shares a frameshift mutation with the E$^{D2}$ allele for dominant black color. An oligonucleotide primer set was designed to amplify complete coding sequence of the porcine MCIR gene. The MCIR coding sequences obtained from five breeds those were Landrace(white). Yorkshire(white), Hampshire(belt), Berkshire(spot) and Jeju native black pigs(black), were used for this study. A multiple sequence alignment of the MCIR coding region using Clustal W was performed. The total length of the MCIR coding sequence ranged from 963 to 966 base pairs(bp) among the selected breeds. The sequence analysis of the complete coding region of MCIR was revealed that Hampshire and Jeju native black pig have 3 cytosines deletion and Birkshire has 2 cytosines deletion at codon 23(nt68) in Extention loci. Besides the finding, there were three different missense mutations and a frameshift mutation in the MCIR coding region.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.315-319
• /
• 2008

Glow-light tetra, Hemigrammus erythrozonus is a teleost belonging to Characidae. The natural habitate of this fish is the wild in the Essequibo river, Guyana and South America. The oogenesis of glow-light tetra was investigated by light microscopy to compare with those of other families. A pair of ovary was located between swim bladder and intestines. The ovary was of white color and ellipsoidal shape with the major axis 11 mm and the minor axis 4 mm. Cytoplasm of oogonia was basophilic and many nucleoli were located at inside of nuclear membrane. In primary oocytes, yolk vesicles were distributed only in the marginal area and egg envelope was not formed on the outside of an egg. In secondary oocytes, the egg envelope was formed and yolk vesicles in the cytoplasm were increased than the earlier stage. The amount of basophilic substance was decreased. In case of matured egg, thickness of egg envelope and size of egg were increased, basophilic substance was distributed in only around the egg envelope. The yolk vesicles were changed to yolk mass in accordance with development. In conclusion, the oogenesis of glow-light tetra, Hemigrammus erythrozonus was characterized by the increase in cell size, the formation and accumulation of yolk, and the decrease of basophilia a in the cytoplasm. The oogenesis of glow-light tetra seems to share common patterns in Characidae, teleost and have a similar pattern with other teleost.

• Journal of the HCI Society of Korea
• /
• v.13 no.3
• /
• pp.17-33
• /
• 2018

Humans process aesthetic functions of objects such as form, size, color, and texture through vision, while at the same time observe them with a symbolic function by a new psychological interpretation based on their past experience. Therefore, it is more important to study and understand the thoughts and psychological influences of how humans perceive with their eyes than what humans simply look with them. With this research purpose in the background, this study will demonstrate in detail the cognitive characteristics of analog and digital images as a symbolic function with a "formative" point of view. Five hypotheses were established, which were proven through the following tests: smartphone, most frequently used in our daily lives, is simplified to a two-dimensional line drawing form, which is set to instances where the R(radius) is applied to the horizontal line of the two-dimensional form of smartphone, where Run-in-R(radius) is applied, and R(radius) rounding is applied to the edges of those shapes. The shapes were combined to form 12 pairs, which was used in a test to the test subjects. As a result, some human characteristics were observed; in specific, some helped prove objectively how humans perceived analog and digital images as psychologically stronger as a symbolic function. If people's thoughts and feelings gained through such study could be stored in database as one value and be provided to product designers, I believe it could be developed into design form as a basic emotional design that consumers desire.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.58-63
• /
• 2020

This paper proposes the method for improving the localization accuracy of the mobile robot based on the stereo camera. To restore the position information from stereo images obtained by the stereo camera, the corresponding point which corresponds to one pixel on the left image should be found on the right image. For this, there is the general method to search for corresponding point by calculating the similarity of pixel with pixels on the epipolar line. However, there are some disadvantages because all pixels on the epipolar line should be calculated and the similarity is calculated by only pixel value like RGB color space. To make up for this weak point, this paper implements the method to search for the corresponding point simply by calculating the gap of x-coordinate when the feature points, which are extracted by feature extraction and matched by feature matching method, are a pair and located on the same y-coordinate on the left/right image. In addition, the proposed method tries to preserve the number of feature points as much as possible by finding the corresponding points through the conventional algorithm in case of unmatched features. Because the number of the feature points has effect on the accuracy of the localization. The position of the mobile robot is compensated based on 3-D coordinates of the features which are restored by the feature points and corresponding points. As experimental results, by the proposed method, the number of the feature points are increased for compensating the position and the position of the mobile robot can be compensated more than only feature extraction.

• Conservation Science in Museum
• /
• v.27
• /
• pp.39-56
• /
• 2022

The purpose of this project was to improve the stability of a pair of leather socks for use on snowy days in the collection of the National Museum of Korea (Namsan1567) by conducting conservation treatment and restoring the socks to their original form for use in research and exhibition. Leather socks are referred to in ancient documents with names combining the word "mal" for socks with a term indicating their material (e.g., pimal, meaning leather socks; nokpimal, meaning deer leather socks; jangpimal, meaning roe deer leather socks, or lipimal, meaning racoon dog leather socks) and are mentioned mostly in connection with Jeju Island. Related documents include the Seungjeongwon ilgi (Daily Record of the Grand Secretariat), Injaeilnok (Diary of Injae Jo Geukseon), and Hamel's Journal and a Description of the Kingdom of Joseon. Extant examples of ancient leather socks display the same form as beoseon (traditional Korean socks) and are made of either leather or a combination of leather and fabric. It is likely that such leather socks were worn on Jeju Island to protect the feet from the cold. A condition survey of the leather socks was first conducted to establish a plan for their conservation treatment. Since the socks were in rather poor condition, it was decided to identify their original form through an investigation of relics and pertinent previous studies. The socks were cleaned in consideration of results of the condition survey, and the missing parts around the necks of the socks were reinforced in a reversible manner using counting stitches with cloth dyed to match the original color. Since the bottoms of the socks had lost much of their original form due to deterioration and disintegration in the leather, supports were made and inserted inside the socks to help retain their shape. Through these processes, the structure and characteristics of the socks and the techniques used in their production could be analyzed, their condition was stabilized, and their original form was recovered.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.234-240
• /
• 2008

Anthocyanin synthesis in strawberry (Fragaria x ananassa cv Maehyang) begins approximately 26 days postflowering and continued throughout fruit ripening. A set of cDNA clones encoding the anthocyanin biosynthetic enzymes were isolated from strawberry. A pair of primers were designed for polymerase chain reaction (PCR) through the comparison of the nucleotide sequences of homologous genes from diverse plants. Reverse transcriptase-PCRs were performed using cDNA synthesized from ripe fruit total RNA and the primers corresponding to each gene. Eight genes of the anthocyanin pathway were cloned and confirmed by sequencing to code for phenylalanine ammonia lyase (PAL), 4-cummarate CoA ligase (4CL), chalcone synthase (CHS), chalcone isomerase (CHI), flavanone-3-hydroxylase (F3H), dihydroflavonol 4-reductase (DFR), anthocyanidine synthase (ANS), UDP-glucose:flavonoid-3-O-glucosyl-transferase (UFGT). Northern analyses showed that the corresponding genes were differentially expressed during the fruit development process. All genes except PAL were predominantly expressed in fruit. Expression of PAL, DFR and ANS was detected 10 days postflowering at the early stage of fruit development, declined for a while and sharply increased 22 days postflowering then showed a peak 34 days postflowering. The other genes, however, were not expressed up to 22 or 30 days postflowering when the initial fruit ripening events occur at the time of initiation of anthocyanin accumulation. The onset of anthocyanin synthesis in ripening strawberry coincides with a coordinated induction of the anthocyanin pathway genes, suggesting the involvement of regulatory genes. We propose that at least two different regulatory mechanisms playa role in the biosynthesis of anthocyanin during color development of strawberry.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.96-105
• /
• 2007

A pair of maroon clownfishes with an indonesian native, reared in recirculation culture system to develope its aquaculture techniques. Courtship, spawning behavior, egg developments and rearing of the maroon clownfish larvae were documented. The larval development were described with illustrative figures. The spawning was occurred 8 times between Feburary and August 2004. The gravid female spawned during 15:00-20:00. The male mainly took care of the eggs supplying oxygen by water currents using their pectoral fins, anal fin and mouth. The fertilized eggs were separative-adhesive and oval in shape, and $1.99{\pm}0.03\;mm$ in longer diameter and $0.88{\pm}0.03\;mm$ in shorter diameter. The fertilized eggs were in deep-orange color. Cleavage occurred in 30 minutes after fertilization, and the egg reached 2 cells stage in 1 hour 10 minutes after fertilization at $27.0^{\circ}{\pm}0.5^{\circ}C$. The embryo was formed in 23 hours 40 minutes after fertilization. Hatching began in between $120{\pm}2$ hours and $150{\pm}12$ hours after fertilization at $27.0^{\circ}C$ in the incubator. Total length (TL) of the newly hatched larvae was 3.22 mm with mouth and anus opened. Ten days after hatching, mean TL of the larvae were 6.21 mm with 28 dorsal fin rays, 17 anal fin rays and 28 caudal fin rays. Nineteen days after hatching, mean TL of the larvae were 9.34 mm. At this stage the larva had three white bands on the body, and they began to feed on commercial diet.

• Fiber Technology and Industry
• /
• v.2 no.4
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2022

Earthenware horn cups with horse head decorations were excavated from Tomb No. 7 of Bokcheon-dong, Dongraegu, Busan Metropolitan City. Made of earth in the shape of a horn, these cups are considered to have been used to drink alcohol or beverage. Large numbers of earthenware horn cups of various shapes were excavated from tombs located in the old territories of Silla and Gaya. A pair of earthenware horn cups were excavated from Tomb No. 7, and the two cups are almost identical in overall shapes and manufacturing techniques despite different sizes. Conservation treatment was carried out for the bigger one of the two horn cups this time. There are two cracks toward the horse head decorations around the mouth with missing parts observed. The chest of the horse touches the ground with one side decorating the horse head and the other side facing the conical mouth of the horn cup. It is in the U shape, striking a balance based on two legs attached behind. The surface of the horn cup was made with a potter's wheel, and the connection to the horse head has traces of cutting and trimming. The horse head is expressed realistically with its features including the ears, eyes, nose, and mouth well apprehended and its color is grey This study intended to investigate manufacturing techniques of the artifact by examining its internal structure through the condition survey in a non-destructive way. CT imaging was used to figure out its manufacturing techniques and to diagnose its condition, and accordingly the scientific conservation treatment was conducted to stabilize the artifact. The precise diagnosis on conservation condition found that there are two chips in the spout with their cracks extended. One of the chips is connected with separation added to the crack. The material which has been used for connection in the past was collected for the infrared spectroscopic analysis, which was identified to be nitrocellulose resin for the connection. Therefore, this conservation treatment focused on removing the old material and preventing the spread of cracks. Before conservation treatment, the condition survey and scientific examination for the artifact were carried out to secure data about the earthenware horn cup with horse head decorations(Treasure). Based on them, effective plans for its conservation treatment was sought for and then existing adhesive was safely removed, and restoration material was selected to take into account its reversibility. In addition, the conservation treatment according to optimal methodologies was conducted through the consultation meeting with experts.