• 한국표면공학회지
• /
• 제45권3호
• /
• pp.106-110
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition where incident vapor flux arrives at non-normal angles. It has been known that tilting the substrate changes the properties of the film, which is thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer TiN films by cathodic arc deposition. TiN films have been deposited on cold-rolled steel sheets and stainless steel sheet. The deposition angle as well as substrate temperature and substrate bias was changed to investigate their effects on the properties of TiN films. TiN films were analyzed by color difference meter, scanning electron microscopy, nanoindenter and x-ray diffraction. The color of TiN films was not much changed according to the deposition conditions. The slanted and zigzag structures were observed from the single and multilayer films. The relation between substrate tilting angle (${\alpha}$) and the growth column angle (${\beta}$) followed the equation of $tan{\alpha}=2tan{\beta}$. The indentation hardness of TiN films deposited by OAD was low compared with the ones prepared at normal angle. However, it has been found that $H^3/E^2$ ratio of 3-layer TiN films prepared at OAD condition was a little higher than the ones prepared at normal angle, which can confirm the robustness of prepared films.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2453-2459
• /
• 2014

Five novel cyanine dyes containing julolidine and indole moieties were synthesized. Several color compensating films for plasma display panels (PDP) were prepared using these dyes. The spectroscopic and physicochemical properties of the synthesized dyes in both solution and film state were evaluated. For each color compensating film, the optimum ratio of dye to binder was determined on the basis of transmittance, half band width, and photo-stability of the color compensating film. The five synthesized dyes showed sharp absorption peaks near 590 nm (orange light) and had molar extinction coefficients above $1{\times}10^5M^{-1}cm^{-1}$. The melting point of the dyes was above $200^{\circ}C$ and photo-stability of the color compensating films was improved by introducing substituents at the 5th position on the indole derivatives.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.40-43
• /
• 2016

Transparent color coating films were fabricated on a glass substrate by using sol-gel hybrid binder and organic dye. Sol-gel hybrid binder coating film fabricated with PTMS of 0.03 mole showed a very high pencil hardness of 9 H. As the withdrawal speed increased from 1.0 mm/s to 5.0 mm/sec, The yellowness ($b^*$) of coating glass also gradually increased. The transmittance of yellow color coating glass was 82.6% and the haze of coating glass was 0.35%. Red and blue color coating glasses also showed the high transmittance of 62.4% and 80.6% respectively. The surface hardness of color coating films was 6 H.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.403-408
• /
• 2021

Various surface colors are predicted and implemented using the interference color generated by controlling the thickness of nano-level diamond like carbon (DLC) thin film. Samples having thicknesses of up to 385 nm and various interference colors are prepared using a single crystal silicon (100) substrate with changing processing times at low temperature by plasma-enhanced chemical vapor deposition. The thickness, surface roughness, color, phases, and anti-scratch performance under each condition are analyzed using a scanning electron microscope, colorimeter, micro-Raman device, and scratch tester. Coating with the same uniformity as the surface roughness of the substrate is possible over the entire experimental thickness range, and more than five different colors are implemented at this time. The color matched with the color predicted by the model, assuming only the reflection mode of the thin film. All the DLC thin films show constant D/G peak fraction without significant change, and have anti-scratch values of about 19 N. The results indicate the possibility that nano-level DLC thin films with various interference colors can be applied to exterior materials of actual mobile devices.

• 한국포장학회지
• /
• 제3권2호
• /
• pp.3-16
• /
• 1996

This study was investigated to the effect of oxygen barrier of four different packaging films of the shelf life of proessed meat product by the simulated distribution test and storage test. The microbial growth, pH, VBN content, TBA value, color change and sensory evaluation were compared during the 2-month storage period at 4, 10, $20^{\circ}C$ after finished the simulated distribution test. The oxygen transmission rates ($cc/m^2$ day) were BF001: 27,88; BF003; 12.30;NY; 77.98; EVOM; 0.41 respectively. The packaging films were not effected on the changes of pH, VBN content, TBA value and color during the storage period. The aerobic microbial growth was increased only at $20^{\circ}C$ in the order of growth rate in the following films;NY > BF001 > BF003 > EVOH. Therefore, the microbial growth was affected significantly by the properties of oxygen barrier off packaging films and it should be an indicator of establishing the shelf life processed meat product.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.361-366
• /
• 2010

목적: Hollow Cathode Discharge방법을 이용한 HCD 이온플레이팅 장비를 제작하였고, 이 장비를 이용하여 stainless steel 위에 TiN 박막을 질소 가스양을 변화하면서 코팅하였으며, 이때 TiN 박막의 미세색상변화를 분석하였다. 방법: 질소 가스에 대한 TiN박막의 미세색상변화를 광학적으로 관찰하기 위해 분광복사계와 분광광도계를 사용하였고, 질소 가스에 대한 TiN 박막의 성분 변화를 알기위해 XPS로 분석하였다. 결과: 질소가스 120 sccm의 TiN 박막의 CIE 색좌표는 (0.382, 0.372)로 은색과 금색의 혼합색으로 나타나고 질소 가스양이 증가함에 따라 x, y값 둘다 조금씩 커져 금색이 점점 진해지는 것을 알 수 있었다. 또한 분광광도계에 의한 TiN 박막의 반사율에 있어서 질소 가스양이 증가함에 따라 550 nm 파장근처에서의 반사율의 기울기가 대체적으로 점점 커지는 것을 알 수 있었다. 그리고 XPS를 사용하여 Ti scan 한 결과, $N_2$ 성분에서 유래된 458 eV의 조그마한 피크는 조금씩 더 들어가며 TiN 성분에서 유래된 455 eV의 큰 피크는 약간씩 커지는 것을 볼 수 있었다. 결론: 질소 가스양이 120 sccm인 TiN 박막에서는 표면에 있는 TiC 성분과 표면과 내부에 존재하는 $N_2$, TiN 성분으로 인해 은색과 금색의 혼합색으로 나타났으나, 질소 가스양이 증가함에 따라 TiN 성분이 다른 성분에 비해 점점 많아져 금색이 점점 진해진 것으로 유추할 수 있었다.

• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.259-264
• /
• 1997

To improve freshness of onion(Allium cepa), it was packed with various packaging films and stored at 5$^{\circ}C$ until 52 days. During the storage, internal gas composition, weight loss, spout ratio, decay ratio, surface color were determined. The used packaging films are two-perforated LDPE (control), LDPE, CPP/OPP/PE, Nylon/PE and Ag-zirconium filled LDPE. Onions were prepared by peeling or dipping in GFSE(grape fruit seed extract) and packed under vacuum or atmosphere with the selective films. Anaerobic condition was shown in the Nylon/PE package after 4 days and, thus weight loss, sprout ratio and color were considerably poor. All onions in the vacuum package after 15 days were spouted. Onions in CPP/OPP/PE and functional film(Ag-zirconium filled LDPE) package showed aerobic respiration until 52 days. Thus, the quality of onions in these packages was superior to the control.

• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.23-27
• /
• 2008

In this work, poly(diallyldimethylammoniumchloride) (PDDAC) and meso-tetrakis(4-carboxyphenyl)porphyrin were considered to produce the self-assembly fabrication films. This method is based on the layer-by-layer (LbL) deposition produced by the electrostatic attraction between positively charged PDDAC and negatively charged porphyrin ions. The result of multilayer fabrication was discussed with the level of color strength (K/S). K/S spectra of the fabricated multilayer films showed gradual increase behaviors. In addition, the color photo images of the fabricated multilayer films showed that PDDAC and porphyrin were successfully attracted by electrostatic self-assembly forces.

• 한국표면공학회지
• /
• 제31권3호
• /
• pp.133-141
• /
• 1998

Stainless is widely used for various purposes due to its good corrosion resistance. There has been much research to produce the color stainless steel by several methods. In this experiment, TixN films have been deposited on the SUS304 substrate by the DC magnetron sputtering system and the color and texture of the films as a function of coating conditions has been studies. The TixN films showed a (111) preferred orintation in bias-free conditions. The texture of coated later was changed from (111) to (200) to (2200 with a change of the bias from -1000V to -3000V. When the bias is low, coated elements have low energy. Therefore, the texturct (111) of low surface energy. The mobility of atoms was increased with the increase of the blas and texture was changed to the other plane. Non-etched specimens all exhibited strong (111) texture. This result shows that (111) is a loose plane and of non-etched specimens all exhibited. High growing velocity of (111) of especially was main texture of Non-etched specimens. Low working pressure($4\times10^{-3}$torr) was more effective than figh working pressure ($6\times10^{-3}$torr) for the gold color of $Ti_xN$ film. L and b were increased and a was decreased with the increase of bias voltage. Accordingly, We obtained the near gold color of $Ti_xN$ film(L;92, a;1~1.5 b:24~29.50. As a result of reflectance. And as the bias increased, the reflectance was proportional to the increasing bias voltage, but we took the top reflectance when the bias voltage was -200V.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권2호
• /
• pp.165-173
• /
• 1996

We prepared polythiophene and poly(3-methylthiophene) films, known as conducting polymer, by electrochemical method. Polythiophene and poly(3-methylthiophene) films were doped and undoped dopant for the studing the understanding of doping mechanism and possible application to the color change switch. We observed that the anodic, cathodic wave and absorption spectra were slightly changed during doping and undoping process in polythiophene. It shows that doping and undoping process were showed some difference by the appearance and disappearance of polaron and bi-polaron. In the relation of the peak of oxidative current density and potential sweep rate of cyclic voltammograms, the amount of dopant in polythiophene film was homogeneously increased at low scan rate. This also can be applied to the poly(3-methlythiophene).