• Journal of the Korean Society for information Management
• /
• v.35 no.2
• /
• pp.115-139
• /
• 2018

Due to the value and the importance of preservation of disaster web records, to build disaster archives is globally becoming a national challenge. This study proposes a acquisition methods based on the issue life cycle model for collecting disaster web records. We firstly analyzed web records acquisition status, methods and period of domestic and foreign disaster archives. In addition, the issue life cycle model was derived by collecting and analyzing the disaster issues in the last 10 years. As the results of the analysis, the issue life cycle model was divided into the sudden type and periodic type according to the characteristics of the disaster. In conclusion, this study propose a method to collect web records according to each model and verify its applicability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.20-29
• /
• 2014

Density is applied both three major macroscopic traffic variables (traffic volume, speed, and density) and two measures of effectiveness (MOE) for level of service (LOS) on highway (density and V/C). Especially, it is known for the most accurate MOE on evaluating the LOS of highway. Despite such importance, there is a lack of study on density relatively than other variables for its difficulty of measurement. Existing density estimation methods have some limitations such as density values of same traffic flow vary with collecting time. In this study, we researched actual density measuring method with panoramic image, after each CCTV images in the Sapaesan Tunnel on Seoul Ring Expressway are matched into one panoramic image. Analysis through the Central Limit Theorem shows that density of 24 1 km-images, which means 24 second, applies traffic situation well. That is to say that reasonable density value regardless of collecting time, and practical density which represents actual traffic flow can be taken in case of measuring density by suggested collecting cycle.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.193-198
• /
• 2005

According to the ISO 14040(1997), Life Cycle Assessment is not the tool only focusing on the emissions from the manufacturing processes of a product, but the tool also expressing environmental adverse impact quantitatively through products entire life cycle (i.e. raw material acquisition, manufacturing, transportation, use, and end-of-life stage). Because the LCA for EMUs(Electrical Multiple Units), however, requires astronomical time and cost for collecting big amount of data. it is inevitable to bring in the simplified LCA methodology, In this study, we introduced standardized methodology of LCA in the world, and found appropriate S-LCA methodology for EMUs. Furthermore, we recommended how to evaluate the environmental impact of EMUs in detail and precisely, using the S-LCA.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.1849-1876
• /
• 2022

Wireless Sensor Network (WSN) is considered as an integral part of the Internet of Things (IoT) for collecting real-time data from the site having many applications in industry 4.0 and smart cities. The task of nodes is to sense the environment and send the relevant information over the internet. Though this task seems very straightforward but it is vulnerable to certain issues like energy consumption, delay, throughput, etc. To efficiently address these issues, this work develops a cross-layer model for the optimization between MAC and the Network layer of the OSI model for WSN. A high value of duty cycle for nodes is selected to control the delay and further enhances data transmission reliability. A node measurement prediction system based on the Kalman filter has been introduced, which uses the constraint based on covariance value to decide the scheduling scheme of the nodes. The concept of duty cycle for node scheduling is employed with a greedy data forwarding scheme. The proposed Duty Cycle-based Greedy Routing (DCGR) scheme aims to minimize the hop count, thereby mitigating the energy consumption rate. The proposed algorithm is tested using a real-world wastewater treatment dataset. The proposed method marks an 87.5% increase in the energy efficiency and reduction in the network latency by 61% when validated with other similar pre-existing schemes.

• Journal of Korean Elementary Science Education
• /
• v.33 no.2
• /
• pp.306-321
• /
• 2014

This study aims to analyze difficulties that pre-service elementary teachers experience in investigating the life cycle of a common cabbage butterfly in person. As difficulties they face during the process of this research, they pointed out collecting eggs, observing molting, creating environments for a breeding cage, feeding, building a breeding cage, and making butterfly specimens. Out of all the environmental difficulties related to their school fields, they pointed out a difficulty of time management most of all, followed by placing a breeding cage in the classroom and the lack of microscopes for observation. In regard to difficulties related to their evaluations on students' activities, they found it difficult to evaluate students' activity with the life cycle of an insect in the aspect of knowledge and even to set evaluation criteria. Besides, many of them responded that it would be appropriate to evaluate a research on the life cycle of an insect through a portfolio or an observation journal. In regard to difficulties in terms of teachers' knowledge, they found it difficult to understand insect molting, metamorphoses, complete metamorphoses, incomplete metamorphoses, the structure of an insect body, and how to distinguish a female insect from a male one. In regard to the application of class models, they knew it is important for students to have various experiences through direct observation, so the experience-based learning model was proper for the process of observing the life cycle of a common cabbage butterfly. However, they found it difficult for students to observe each stage of the life cycle in person.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2010

Collecting all failures during life cycle of vehicle is not easy way because its life cycle is normally over 10 years. Warranty period can help gathering failures data because most customers try to repair its failures during warranty period even though small failures. This warranty data, which means failures during warranty period, can be a good resource to predict initial reliability and permanence reliability. However uncertainty regarding reliability prediction remains because this data is censored. University of Wuppertal and major auto supplier developed the reliability prognosis model considering censored data and this model introduce to predict reliability estimate further "failure candidate". This paper predicts reliability of telecommunications system in vehicle using the model and describes data structure for reliability prediction.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1350-1358
• /
• 2008

Recently the study related to life cycle cost analysis of railway structure consisted of a complex is proceeded covering several range, which is considering the methodology of efficiency and rationalization for maintenance and analysing long-time behavior of the structure of looking at standpoint from asset management and safety. But LCCA(life cycle cost analysis) of railway structure was almost impossible as there were not anything datum for maintenance plan, such as maintenance periods related to each of components(painting and corrosion of steel, and cracking of elements, etc)and maintenance proportion, despite of its 100-year history. According, for collecting data related to railway truss bridge, bridge record cards and testing safety papers, and researching question, etc are surveyed and classified for LCC Analysis. Especially, LCC assessment on the side of assets-maintenance considering about initial cost, maintenance cost, and indirect cost is constructed. Maintenance period and complementary measure rate are very important in maintenance. To decide maintenance period, Baysian updating method is applied.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2000

Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2009

The EPCglobal leading the development in RFID standards proposed Event Cycle Specification (ECSpec) and Event Cycle Reports (ECReports) for the standard about RFID middleware interface. ECSpec is a specification for filtering and collecting RFID tag data and is treated as a Continuous Query (CQ) processed during fixed time intervals repeatedly. ECReport is a specification for describing the results after ECSpec is processed. Thus, it is efficient to apply Query Indexing technique designed for the continuous query processing. This query index processes ECSpecs as data and tag events as queries for efficiency. In logistics environment, the similar or same products are transferred together. Also, when RFID tags attached to the products are acquired, the acquisition events occur massively for the short period. For these properties, it is inefficient to process the massive events one by one. In this paper, we propose a technique reducing similar search process by considering tag events which are collected by the report period in ECSpec, as a range query. For this group processing, we suggest a queuing method for collecting tag events efficiently and a structure for generating range queries in the queues. The experiments show that performance is enhanced by the proposed methods.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.3
• /
• pp.33-42
• /
• 2020

Operational energy is the energy that is used during the occupancy stage of building life cycle. It is associated with relatively longer proportion of infrastructure's service life and can constitute 80-90% of the total energy. Assessing the energy use in buildings is essential since they are significant contributors to energy demand. In this regard, energy performance of buildings has become the focus of many regulations. This paper aimed to review the regulations about the energy performance of buildings during their operational stage in Korea. For energy efficient operation program for existing buildings, governments should implement policies and support voluntary programs that rely on collecting and managing building performance data and using this data to inform public and private-sector operation and maintenance strategies. Implementing these policies and programs requires tools and processes for collecting, curating, managing, analyzing, and publishing this data. Energy assessment tool, that is a data resource management tool that enables to assess energy use across the entire portfolio of buildings, is also required.