Abstract
Density is applied both three major macroscopic traffic variables (traffic volume, speed, and density) and two measures of effectiveness (MOE) for level of service (LOS) on highway (density and V/C). Especially, it is known for the most accurate MOE on evaluating the LOS of highway. Despite such importance, there is a lack of study on density relatively than other variables for its difficulty of measurement. Existing density estimation methods have some limitations such as density values of same traffic flow vary with collecting time. In this study, we researched actual density measuring method with panoramic image, after each CCTV images in the Sapaesan Tunnel on Seoul Ring Expressway are matched into one panoramic image. Analysis through the Central Limit Theorem shows that density of 24 1 km-images, which means 24 second, applies traffic situation well. That is to say that reasonable density value regardless of collecting time, and practical density which represents actual traffic flow can be taken in case of measuring density by suggested collecting cycle.
거시적인 3대 교통변수(교통량, 속도, 밀도)와 고속도로 서비스 수준의 효과척도(밀도, 교통량 대 용량비) 모두 해당되는 변수는 밀도이다. 특히 도로의 서비스 수준을 평가함에 있어 가장 정확하고 우수한 효과척도로 알려져 있다. 이러한 중요성에도 불구하고 측정방법의 어려움으로 인해 타 변수에 비해 밀도를 활용한 연구가 상대적으로 부족하였다. 기존 밀도추정방법의 경우 측정시각에 따라 동일한 교통류의 밀도값이 변화하는 등의 한계가 있다. 본 연구에서는 서울외곽순환고속도로 사패산 터널 내부의 CCTV 영상을 정합하여 파노라마 영상을 제작한 후, 제작된 파노라마 영상을 이용하여 실제 밀도를 측정하는 방법을 연구하였다. 중심극한정리를 이용하여 분석한 결과, 1 km 사진 24개(혹은 24초)를 이용하여 밀도를 측정하면 당시 교통상황을 잘 반영할 수 있었다. 즉, 본 연구에서 제시한 밀도 수집 주기를 준수하여 수집한 구간영상으로 밀도를 측정할 경우 측정시각에 관계없이 평균적인 밀도값을 측정할 수 있으며, 현실 교통류를 대변하는 현실적인 밀도를 취득할 수 있다.