• Journal of The Korean Association For Science Education
• /
• v.40 no.2
• /
• pp.113-126
• /
• 2020

In this study, we investigated science teacher's guidance of teaching practice in the perspective of the CHAT. Two science teachers working for schools affiliated with a college of education in Seoul took part in this study. Visiting the entire teaching practice, we observed the processes of guidance and the lessons and collected related materials. Semi-structured interviews were also conducted before, during and after teaching practice. All the data were analyzed by using the constant comparative method. The analyses of the results revealed that student guidance during the lessons was also important. And the curriculum orientation needed to be carried out before teaching practice. The division of labor with pre-service teachers relieved teachers of work burden. Teachers failed to guide assessment of students due to influences of community element such as students who were sensitive to grades. In both cases, teaching practice were so collaborative that those were valuable not only for pre-service teachers but also for teachers and students. Two teachers' activity system showed contradictions due to the lack of specific manuals for guidance and the lack of understanding of pre-service teachers. These contradictions brought about difficulties in their guidance, which in turn led to the difficulties experienced by pre-service teachers during teaching practice. They attempted to resolve contradictions in alternative ways and required standardized manuals for guidance, environments in which teachers could collaborate, and close connections with a college of education. Based on the results, we suggest some ways to improve teaching practice.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.40.3-41
• /
• 2017

Korea Astronomy and Space Science Institute The observation of particles and waves using a single satellite inherently suffers from space-time ambiguity. Recently, such ambiguity has often been resolved by multi-satellite observations; however, the inter-satellite distances were generally larger than 100 km. Hence, the ambiguity could be resolved only for large-scale (> 100 km) structures while numerous microscale phenomena have been observed at low altitude satellite orbits. In order to resolve those spatial and temporal variations of the microscale plasma structures on the topside ionosphere, SNIPE mission consisted of four (TBD) nanosatellites (~10 kg) will be launched into a polar orbit at an altitude of 700 km (TBD). Two pairs of satellites will be deployed on orbit and the distances between each satellite will be from 10 to 100 km controlled by a formation flying algorithm. The SNIPE mission is equipped with scientific payloads which can measure the following geophysical parameters: density/temperature of cold ionospheric electrons, energetic (~100 keV) electron flux, and magnetic field vectors. All the payloads will have high temporal resolution (~ 16 Hz (TBD)). This mission is planned to launch in 2020. The SNIPE mission aims to elucidate microscale (100 m-10 km) structures in the topside ionosphere (below altitude of 1,000 km), especially the fine-scale morphology of high-energy electron precipitation, cold plasma density/temperature, field-aligned currents, and electromagnetic waves. Hence, the mission will observe microscale structures of the following phenomena in geospace: high-latitude irregularities, such as polar-cap patches; field-aligned currents in the auroral oval; electro-magnetic ion cyclotron (EMIC) waves; hundreds keV electrons' precipitations, such as electron microbursts; subauroral plasma density troughs; and low-latitude plasma irregularities, such as ionospheric blobs and bubbles. We have developed a 6U nanosatellite bus system as the basic platform for the SNIPE mission. Three basic plasma instruments shall be installed on all of each spacecraft, Particle Detector (PD), Langmuir Probe (LP), and Scientific MAGnetometer (SMAG). In addition we now discuss with NASA and JAXA to collaborate with the other payload opportunities into SNIPE mission.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.493-498
• /
• 2012

Korean construction companies have maintained stable market share based on high technology and cost competitiveness although international construction market has been stalled due to increasing global economy uncertainties. However, Korean construction companies have relied heavily on the general types of projects in Middle East and Asia although the portion of different types of projects such as Build-Transfer-Operate (BTO), Build-Transfer-Lease (BTL), and Public-Private-Partnership (PPP) has been increasing in the market. When delivering huge projects requiring contractors deal with activities from project planning to operation, securing finance sources and profitability is deemed critical. Therefore, Korean construction companies need more attentions on the construction market supported by Multilateral Development Banks. However, Korean construction companies have not utilized effective strategies for the market entry and also government supportive policies are not useful enough to help construction companies. This study aims both to analyze the contract structure of Korean construction companies for presenting critical factors that need to be prepared and to suggest various methods that can be applied to support construction companies that have much interest in the Multilateral Development Banks. According to the results of study, it is important that Korean government provide structural information system, make a specialized organization, prevent over-heating among Korean construction companies, and collaborate with Official Development Agency. In addition, it appeared that the fairness and financial stability of project have recognized main advantages of the Multilateral Development Banks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.10-21
• /
• 2018

This study analyzes difficulties of enterprise activities in Chinese construction market by surveys on early entrants and interviews with experts. This study also suggests future strategy to enter the market by using inducement coefficient model. Korean construction companies in China are under heavy pressure to maintain requirement of licenses, despite recent deregulation. They are in dire predicament for market entry due to the Foreign Direct Investment System. It is almost impossible to participate in public projects and also it is not easy to do PPP projects. Therefore, Korean government should make more efforts to solve those issues through negotiations in FTA and GPA. For future expansion in Chinese construction market, it is highly recommended to boost cooperation models between Korea and China according to the empirical results of inducement coefficient model. Korean companies should collaborate with Chinese companies in some fields: smart city, environment and water treatment. Also, Korean government should support Korean companies by diplomatic means such as requesting for further opening of China's market. In GPA or GATS negotiation, Korean government should ask Chinese government that Korean companies can obtain order independently (without joint venture with Chinese companies) in China. Lastly, Korean construction companies should participate in construction projects ordered by international organizations such as ADB, AIIB.

• International Area Studies Review
• /
• v.15 no.2
• /
• pp.427-447
• /
• 2011

In global, there is an active movement to reduce the green house gas. Allowance and carbon tax are the one of effective alternatives to mitigate green gas effect. In addition, the clean development machinism(CDM) can be applied between the ANNEX 1 and developing countries. It could be an one good solution to reduce the GHG. In the Northern Asia, the CDM can be the one of the possible solution to reduce the GHG because the Japan has a responsibility to reduce GHG and the China and Korea have a room to supply CDM credit. It is suffice to say that if these three countries decide to collaborate, the new international carbon market can be established that can be the similar form of EU-ETS. It is clear that few barriers must be removed to launched such new form of carbon market. Protection of domestic technology, excessive financial request of business opportunities by CDM, and irrational needs of carbon credit that created by CDM, listed constraints define as an one single word, the national selfishness. Once it is cleared, there is high possibility that the Northern Asia CDM trading system can be launched.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.35-45
• /
• 2009

Emergency medical center(EMC) is the place for patients who need medical treatment immediately due to a disease, childbirth, or all sorts of accidents. Currently, most of EMCs use temporary beds because regular EMC beds cannot afford to serve all incoming patients. However, since it decreases the quality of service(QoS) of EMC patients and their guardians and efficiency of the EMC, some improvements are highly required to diminish the usage of temporary beds. The system duration time is one of the typical QoSs. This thesis proposes the information which is critical to make a better decision for cut down the number of temporary beds without sacrificing QoS of patients. The key point is to control the duration time of medical treatments for the consultation and hospitalization process, since it is the major reason of overcrowding in EMC and the usage of temporary beds. In this paper, we proposed an Arena simulation model reflecting real world substantially. Arena is one of the most widely accepted simulation softwares in the world. Using the developed model, we can obtain the optimal EMC operation parameters through simulation experiments. Optquest, included in the Arena, is used to make the developed simulation model collaborate with an optimization model. The results showed one can determine the set of optimal operation parameters decreasing the required number of temporary beds without deteriorating EMC patient's QoS.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.369-378
• /
• 2012

In France, there are many forms of organizations based on the intercommunal solidarity for city development and management. The purpose of the collaboration among Communes is to achieve high quality and well-equipped service-delivery system through co-operation of public services needed grand finances : water supply and sewage system and waste disposal system etc. The cooperation among French Communes and its effects, even though these were owing to the existing French local administration system, continued throughout regional co-management and social co-development process. This study suggested some characteristics and implications of the collaborative-style French new-town development and management organizations focused on the EPA, SAN and CA. First, the role of developmental corporation like EPA and its collaborative structure of decision-making are meaningful, because in these ways many related Communes could share a goal of new town development. Second, the way of new town corporation (SAN) is important in the sense of enabling the Communes to collaborate with each others while maintaining autonomy, so those are not simply state-directed objects, which was very difficult in the former French local administration system. Finally, transforming to CA (Communautes d'agglomeration:city community), EPA as an intercommunal corporation is possible to extend its purpose to the domain of regional planning including new town and periphery areas and change its position to a subject which can practice Commune's sustainable development according to stages of city's development and maturity. The most important implication of this study on urban development in Korea is that administrative consultative council or association among local governments and related authorities need to be established and effectively operate because multi-stakeholders could share a goal of urban development and management through that.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.69-80
• /
• 2015

This can be promoted collaboration environment for the system and the system is very important for competitiveness, it is equipped. If so, could work in collaboration with members of the organization to promote collaboration what factors? Organizational collaboration and cooperation of many people working, or worth pursuing common goals by sharing information and processes to improve labor productivity, defined as collaboration. Factors that promote collaboration are shared visions, the organization's principles and rules that reflect the visions, on-line system developments, and communication methods. First, it embodies the vision shared by the more sympathetic members are active and voluntary participation in the activities of the organization can be achieved. Second, the members are aware of all the rules and principles of a united whole is accepted and leads to good performance. In addition, the ability to share sensitive business activities for self-development and also lead to work to make this a regular activity to create a team that can collaborate to help the environment and the atmosphere. Third, a systematic construction of the online collaboration system is made efficient and rapid task. According to Student team and A corporation we knew that Cloud services and social media, low-cost, high-efficiency services could achieve. The introduction of the latest information technology changes, the members of the organization's systems and active participation can take advantage of continuing education must be made. Fourth, the company to inform people both inside and outside of the organization to communicate actively to change the image of the company activities, the creation of corporate performance is very important to figure. Reflects the latest trend to actively use social media to communicate the effort is needed. For development of systematic collaboration promoting model steps to meet the organizational role. First, the Chief Executive Officer to make a firm and clear vision of the organization members to propagate the faith, empathy gives a sense of belonging should be able to have. Second, middle managers, CEO's vision is to systematically propagate the organizers rules and principles to establish a system would create. Third, general operatives internalize the vision of the company stating that the role of outside companies must adhere. The purpose of this study was well done in collaboration organizations promoting factors for strategic alignment model based on the golden circle and collaboration to understand and reflect the latest trends in information technology tools to take advantage of smart work and business know how student teams through case analysis will derive the success factors. This is the foundation for future empirical studies are expected to be present.

• Asia pacific journal of information systems
• /
• v.18 no.3
• /
• pp.21-43
• /
• 2008

The task network which is formed of different individuals can be recognized as a social network. Therefore, the way to communicate with people inside or outside the network has considerable influence on their outcome. Moreover, the position on which a member stands in a network shows the different effects of the information systems supporting communication with others. In this paper, it is to be studied how personal CMC (computer-mediated communication) tools affect the mission that those who work for a network perform through diverse task networks. Especially, we focused on synchronicity of CMC. On this score, the perspective of Media Synchronicity Theory was taken that had been suggested by criticizing Media Richness Theory. It is the objective, from this perspective, to find which characteristics of networks make the value of IT supporting synchronicity high. In the research trends of social networks, there have been two traditional perspectives to explain the effect of network: embeddedness and diversity ones. These differ from the aspect which type of social network can provide much more economic benefits. As similar studies have been reported by various researchers, these are also divided into the bonding and bridging views which are based on internal and external tie, respectively, Size, density, and centrality were measured as the characteristics of personal task networks. Size means the level of relationship between members. It is the total number of other colleagues who work with a specific member for a certain project. It means, the larger the size of task network, the more the number of coworkers who interact each other through the job. Density is the ratio of the number of relationships arranged actually to the total number of available ones. In an ego-centered network, it is defined as the ratio of the number of relationship made really to the total number of possible ones between members who are actually involved each other. The higher the level of density, the larger the number of projects on which the members collaborate. Centrality means that his/her position is on the exact center of whole network. There are several methods to measure it. In this research, betweenness centrality was adopted among them. It is measured by the position on which one member stands between others in a network. The determinant to raise its level is the shortest geodesic that represents the shortest distance between members. Centrality also indicates the level of role as a broker among others. To verify the hypotheses, we interviewed and surveyed a group of employees of a nationwide financial organization in which a groupware system is used. They were questioned about two CMC applications: MSN with a higher level of synchronicity and email with a lower one. As a result, the larger the size of his/her own task network, the smaller its density and the higher the level of his/her centrality, the higher the level of the effect using the task network with CMC tools. Above all, this positive effect is verified to be much more produced while using CMC applications with higher-level synchronicity. Among the a variety of situations under which the use of CMC gives more benefits, this research is considered as one of rare cases regarding the characteristics of task network as moderators by focusing ITs for the operation of his/her own task network. It is another contribution of this research to prove empirically that the values of information system depend on the social, or comparative, characteristic of time. Though the same amount of time is shared, the social characteristics of users change its value. In addition, it is significant to examine empirically that the ITs with higher-level synchronicity have the positive effect on productivity. Many businesses are worried about the negative effect of synchronous ITs, for their employees are likely to use them for personal social activities. However. this research can help to dismiss the concern against CMC tools.