• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.301-308
• /
• 2014

Three-dimensional integration technology results in area savings, platform power savings, and an increase in performance. Through-silicon via (TSV) assembly and manufacturing processes can potentially introduce defects. This may result in increases in manufacturing and test costs and will cause a yield problem. To improve the yield, spare TSVs can be included to repair defective TSVs. This paper proposes a new built-in self-test feature to identify defective TSV channels. For defective TSVs, this paper also introduces dynamic self-repair architectures using code-based and hardware-mapping based repair.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2006

Quadrature amplitude modulation-spread spectrum (QAM-SS) and code division multiplexing (CDM) are multi-level modulation schemes with high performance but they cause a large peak-average power ratio (PAPR). Therefore, this paper proposes a novel modulation scheme for high-rate transmission which follows a sequence of CDM-mapping-CDM not only to correct the above-mentioned problem but also offer a high flexibility in obtaining arbitrary multilevel modulation with very low implementation complexity and high performance.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.12-21
• /
• 1996

The trellis shaping is the method of selecting a minimum weight sequence from an equivalent class of possible transmitted sequences. It is perforemed by searching through the trellis diagram of a shaping convolutional code Cs. A shaping gain of the order of 1dB may be obtained with a simple 4-state shaping code. But when the rellis shaping is applied to multi-dimensional constellation, the shaping gain is decreased and the transmission delay is increased, which make it difficult to apply the trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping algorithm is used for the mapper in the proposed trellis shaping. The simulatio result shows that the proposed trellis shaping is better than coventional trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping on multi-dimensional costellation with respect to shaping gain and transmission delay. And the constellation expansion ratio (CER) and the capacity of transmitted injformation are identical to those of conventional trellis shaping on multi-dimensional constellation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.281-286
• /
• 2003

Since National Geographic Information System was started, paper maps have been made with computer aided editing of digital map, instead of etching map-size negative film. Automated paper mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. Therefore, in this study we try to analyze correlation of the digital map feature code and the 1/5,000 topographic map specifications which is necessary for paper mapping automatization using digital map Ver.2.0, and try to develop fundamental modules which will play a core role in automated paper mapping system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.321-328
• /
• 2004

Since National Geographic Information System was started, topographic maps have been made with computer aided editing of digital map, instead of etching map-size negative film. topographic mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. On the basis of the previous study for analyzing correlation between the digital map feature code and the 1/5,000 topographic map specifications and trying to develop fundamental modules which will play a core role in topographic mapping system, in this study, we apply some 1/5,000 digital maps Ver.2.0 to topographic mapping system have implemented and try to analyze the result.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.322-331
• /
• 2016

Image compression is an essential technique for saving time and storage space for the gigantic amount of data generated by images. This paper introduces an adaptive source-mapping scheme that greatly improves bit-level lossless grayscale image compression. In the proposed mapping scheme, the frequency of occurrence of each symbol in the original image is computed. According to their corresponding frequencies, these symbols are sorted in descending order. Based on this order, each symbol is replaced by an 8-bit weighted fixed-length code. This replacement will generate an equivalent binary source with an increased length of successive identical symbols (0s or 1s). Different experiments using Lempel-Ziv lossless image compression algorithms have been conducted on the generated binary source. Results show that the newly proposed mapping scheme achieves some dramatic improvements in regards to compression ratios.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.43-49
• /
• 2016

This paper presents the design and implementation of virtual aquarium by generating 3D models of fishes that are colored by viewers in an aim to create interaction among viewers and aquarium. The virtual aquarium system is composed of multiple texture extraction modules, a single interface module and a single display module. The texture extraction module recognize the QR code on the canvas to get information of the predefined mapping table and then extract the texture data for the corresponding 3D model. The scanned image is segmented and warp transformed onto the texture image by using the mapping information. The extracted texture is transferred to the interface module to save on the server computer and the interface module sends the fish code and texture information to the display module. The display module generates a fish on the virtual aquarium by using predefined 3D model with the transmitted texture. The fishes on the virtual aquarium have three different swimming methods: self-swimming, autonomous swimming, and leader-following swimming. The three different swimming methods are discussed in this paper. The future study will be the implementation of virtual aquarium based on storytelling to further increase interactions with the viewer.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.224-235
• /
• 2014

Recently, Productivity of the construction industry has been decreasing than other industries. Because of this, BIM is being spread in the construction industry. However, quality criteria for BIM data is insufficient. Regulation information is an important factor for initial architectural design evaluations. However, building code and related regulation are numerous. National building code structure in Korea is much more complex than other countries. The purpose of this study is to suggest the typology method of building code and apply to real regulations. To achieve this purpose, the authors have extracted required information to from original regulation for code checking and suggested mapping methods between extracted information and information of IFC scheme. In addition, the authors have represented EXPRESS-G diagram for extracting information from IFC scheme and suggested code checking method through stair case. Output of this study can be used as a base line data for automated code checking system based on open BIM. Automated code checking system will be utilized in architectural design evaluations and supported to increase design quality. It can be used to mount in SEUMTER that is the construction administration system of Ministry of Land, Infrastructure and Transport (MOLIT).

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.261-267
• /
• 2001

In this paper, we have illustrated implementations and there results of network attacks and detections. We consider two attacks, smurf attach and network mapping attack, which are one of the typical intrusions using the ICMP The NFR/sup TM/ is used to capture all of our interesting packets within the network traffic. We implement the smurf and network mapping attacks with the UNIX raw socket, and build the NFR's backend for it's detection. The N-Code programming is used to build the backend. The implementing results show the possibility of preventing illegal intruding to network systems.