• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.340-344
• /
• 1998

Failure mechanisms were investigated for the two layer thermal barrier coatings consisting of NiCrAlY bond coat and $ZrO_2$-8wt.% $Y_2O_3$ ceramic coating during cyclic oxidation. $Al_2O_3$ developed at the ceramic coating/bond coat interface first, followed by the Cr/Ni rich oxides such as $NiCr_2O_4$ and $Ni(Al, Cr)_2O_4$ during cyclic oxidation. It was observed that the spalling of ceramic coatings took place primarily within the NiCrAlY bond coat oxidation products or at the interface between the bond coat oxidation products and zirconia based ceramic coating or the bond coat. It was also observed that the fracture within these oxidation products occurred with the formation of $Ni(Cr, Al)_2O_4$ spinel or Cr/Ni rich oxides. It was therefore concluded that the formation of these oxides was a life-limiting event for the thermal barrier coatings.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.4
• /
• pp.147-152
• /
• 2006

Failure mechanisms of electron beam physical vapor deposited thermal barrier coatings(EB-PVD TBCs) that occur during thermal cyclic oxidation were investigated. The investigations include microstructural degradation of NiCrAIY bond coat, thermally grown oxides(TGOs) along the ceramic top coat-substrate interface and fracture path within TBCs. The microstructural degradation of the bond coat during cyclic oxidation created Al depleted zones, resulting in reduction of NiAl and ${\gamma}$-Ni solid solution phase. It was observed that the fracture took placed primarily within the TGOs or at the interfaces between TGOs and bond coat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.83-88
• /
• 1998

From the evaluation of physical properties such as springiness, gumminess, adhesiveness, chewiness and hardness by the texture analyzer, vegetable soybean lines with green seed-coat were best as compared with those with black, brown, mixed, and yellow seed-coats. A panel test evaluated on the basis of taste, sweetness, chewiness, and total scores also indicated that soybean lines with green seed-coat were the best. The total scores of panel test was decreased in the order of green > yellow> black> brown seed-coat colored soybean. The mean value of sucrose content obtained by HPLC analysis was highest in black seed-coat colored soybean, and followed by green, yellow, and brown soybeans. The highest sucrose content (8.22%) was observed in 180362, a soybean line with green seed-coat. The full-season type soybeans showed much higher sucrose content than summer types which are mainly cultivated on farmer's fields for vegetable purposes. The final 13 lines selected from 300 colored soybeans showed nearly the same panel scores as Miwongreen. However, these lines had a great deal of variation in sucrose content, and much higher readings in texture analysis than Miwongreen, especially in chewiness and hardness which were the most important properties in vegetable soybeans.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.1-9
• /
• 2016

PURPOSES : This study focuses on the evaluation of interface performance with varying surface texture and tack coat application in an asphalt overlay. METHODS : The evaluation is carried out in two phases: tracking test and interface bond strength test. Using an image processing tool, tracking test is conducted to evaluate the susceptibility of the tack coat material to produce excessive tracking during application. Using the pull-off test method, the bond strength test is performed to determine the ability of the interface layer to resist failure. RESULTS : Results show that the underseal application yields less tracking compared to other applications. However, the bond strength is barely within the minimum acceptable value. On the other hand, RSC-4 produces higher bond strength for all surface types, but the drying time is long, which produces excessive tracking. CONCLUSIONS : While underseal application may be suitable for a trackless condition, the bond strength is less appealing compared to the rest of the tack applications available. RSC-4 demonstrated a high and consistent bond strength performance, but more time is required for drying to avoid excessive tracking. Tack coat application and surface type combination produce varying results. Therefore, these should be considered when selecting suitable future tack coat application options.

• BMB Reports
• /
• v.39 no.1
• /
• pp.16-21
• /
• 2006

The coat protein (CP) of Papaya ringspot virus (PRSV) was analyzed for presentation of the antigenic peptide of animal virus, Canine parvovirus (CPV), in Escherichia coli (E. coli). The 45 nucleotides fragment coding for the 15-aa peptide epitope of the CPV-VP2 protein was either inserted into the PRSV-cp gene at the 5', 3' ends, both 5' and 3' ends or substituted into the 3' end of the PRSV cp gene. Each of the chimeric PRSV cp genes was cloned into the pRSET B vector under the control of the T7 promoter and transformed into E. coli. The recombinant coat proteins expressed from different chimeric PRSV-cp genes were purified and intraperitoneally injected into mice. All of the recombinant coat proteins showed strong immunogenicity and stimulate mice immune response. The recombinant coat proteins containing the CPV epitope insertion at the C terminus and at both N and C termini elicited ten times higher specific antisera in immunized mice compared with the other two recombinant coat proteins which contain the CPV epitope insertion at the N terminus and substitution at the C terminus.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.375-381
• /
• 2005

High temperature oxidation behavior of thermal barrier coating (TBC) system (IN738 substrate + NiCoCrAlY or NiAl bond coat with or without Pt + yttria stabilized zirconia) prepared by air plasma spray (APS) process has been studied in order to understand the effect of Pt addition to bond coat on the stability of TBC system. Specimens were oxidized in thermal cycling and isothermal oxidation test at $1100^{\circ}C$. The Pt addition in TBC system with NiCoCrAlY bond coat showed a longer life time compared to that without addition of Pt. Pt addition to TBC system is believed to help the formation of more stable thermally grown oxide, $Al_2O_3$, at the TBC/bond coat interface, leading to a longer lifetime of TBC system.

• Korean Journal of Plant Taxonomy
• /
• v.53 no.2
• /
• pp.102-109
• /
• 2023

The basic information of ovule and seed characteristics was investigated for five monotypic and endemic genera in the Korean peninsula as categorized by the Flora of Korea category. The carpels and seeds were sectioned with a rotary microtome. Mature seeds were coated with platinum using an ion sputter and observed using a scanning electron microscope. As a result, Abeliophyllum was found to be anatropous and a unitegmic ovule, with a slightly colliculate seed surface and exotestal seed coat type. The ovule of Coreanomecon was anatropous and bitegmic, having a distinct echinate seed surface, and exo-endotestal seed coat type with a prismatic crystal in the mesotesta. The ovule of Hanabusaya was anatropous and a unitegmic, with a long reticulate seed surface sculpture, and distinct exotestal seed coat type. In addition, a wing developed at the opposite side of the raphe bundle. Megaleranthis was an anatropous and bitegmic ovule, having a small pentagonal disk shape, a concave seed surface and exotestal seed coat type. Finally, Pentactina was also anatropous and a unitegmic ovule, reticulate seed sculpture, and endotestal seed coat type. These data will be proving to be a source of good information for securing bio-sovereignty in the near future.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.21-27
• /
• 2014

The objective of this study was to determine the effect of the MC1R genotypes of the Chikso (Korean brindle cattle) sires on the coat colors of their offspring. In this study, 15 Chikso sires with known MC1R genotypes were used for breeding in the Gangwon Province Livestock Research Center, the Chungbuk Institute of Livestock and Veterinary Research, and the Livestock Experiment Station, Jeonbuk Institute of Livestock and Veterinary Research from either 2011 or 2012 to 2013. There were 6 sires with $E^+E^+$ genotypes and 9 sires with $E^+e$ genotypes, and their coat colors were all whole brindle (more than 50 of the body). Among the 90 calves produced in 2011~2013 or 2012~2013 from the 15 sires, 50 (55.6%) of them were females and 40 (44.4%) of them were males. Coat colors of the offspring were determined when they reached over 6 months of age. Calves with whole brindle, part brindle, brown and black coat colors were 42 (48.3%), 11 (12.6%), 18 (20.7%) and 16 (18.4%), respectively. Ratio of calves with whole brindle coat color was higher than any other coat colors. Among the offspring with whole brindle color, 20 (41.7%) calves were female and 22 (51.3%) calves were male. By determining the MC1R genotypes of the dams and calves in this study along the family lines, and investigating other genes that may be involved in the coat colors of the Chikso, better breeding system may be established to increase the brindle coat color appearance in the future.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.325-329
• /
• 2011

The main objective of this study is to investigate the distribution of coat color among Ulleung Korean Native Brindle Cattle, and to identify basic genetic elements required for the fixation of coat color traits. 1. The distribution of coat color among Ulleung Korean Native Brindle Cattle was 24.3% yellow (67/276),13.0% black (36/276), 62.7% brindle (173/276). The frequency of Brindle coat color was slightly higher (66%, 105/159) among embryo transfer from outside than that of cows produced by embryo transfer from jurisdiction. 2. Investigation of coat color distribution in each sex group showed that the frequency of yellow coat color was lower in males (18.1%, 25/138) than in females (31.4%, 43/137). On the other hand, the frequency of brindle coat color was slightly higher among males (68.1%, 94/138) than in females (56.9%, 78/137). 3. Examination of Brindle coat color expression based on the intensity of black dots on the nose indicated that the expression of black coat color increase in proportion to the intensity of black dots.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.37-46
• /
• 2017

PURPOSES : A composite pavement utilizes both an asphalt surface and a concrete base. Typically, a concrete base layer provides structural capacity, while an asphalt surface layer provides smoothness and riding quality. This pavement type can be used in conjunction with rollercompacted concrete (RCC) pavement as a base layer due to its fast construction, economic efficiency, and structural performance. However, the service life and functionality of composite pavement may be reduced due to interfacial bond failure. Therefore, adequate interfacial bonding between the asphalt surface and the concrete base is essential to achieving monolithic behavior. The purpose of this study is to investigate the bond characteristics at the interface between asphalt (HMA; hot-mixed asphalt) and the RCC base. METHODS : This study was performed to determine the optimal type and application rate of tack coat material for RCC-base composite pavement. In addition, the core size effect, temperature condition, and bonding failure shape were analyzed to investigate the bonding characteristics at the interface between the RCC base and HMA surface. To evaluate the bond strength, a pull-off test was performed using different diameters of specimens such as 50 mm and 100 mm. Tack coat materials such as RSC-4 and BD-Coat were applied in amounts of 0.3, 0.5, 0.7, 0.9, and $1.1l/m^2$ to determine the optimal application rate. In order to evaluate the bond strength characteristics with temperature changes, a pull-off test was carried out at -15, 0, 20, and $40^{\circ}C$. In addition, the bond failure shapes were analyzed using an image analysis program after the pull-off tests were completed. RESULTS : The test results indicated that the optimal application rate of RSC-4 and BD-Coat were $0.8l/m^2$, $0.9l/m^2$, respectively. The core size effect was determined to be negligible because the bond strengths were similar in specimens with diameters of 50 mm and 100 mm. The bond strengths of RSC-4 and BD-Coat were found to decrease significantly when the temperature increased. As a result of the bonding failure shape in low-temperature conditions such as -15, 0, and $20^{\circ}C$, it was found that most of the debonding occurred at the interface between the tack coat and RCC surface. On the other hand, the interface between the HMA and tack coat was weaker than that between the tack coat and RCC at a high temperature of $40^{\circ}C$. CONCLUSIONS : This study suggested an optimal application rate of tack coat materials to apply to RCC-base composite pavement. The bond strengths at high temperatures were significantly lower than the required bond (tensile) strength of 0.4 MPa. It was known that the temperature was a critical factor affecting the bond strength at the interface of the RCC-base composite pavement.