• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.145-152
• /
• 2021

Purpose: During the treatments of cancer patients with a linear accelerator (LINAC) using photon beams with energies ≥8 MV, the components inside the LINAC head get activated through the interaction of photonuclear reaction (γ, n) and neutron capture (n, γ). We used spectroscopy and measured the dose rate for the LINAC in operation after the treatment ended. Methods: We performed spectroscopy and dose rate measurements for three units of LINACs with a portable high-purity Germanium (HPGe) detector and a survey meter. The spectra were obtained after the beams were turned off. Spectroscopy was conducted for 3,600 seconds, and the dose rate was measured three times. We identified the radionuclides for each LINAC. Results: According to gamma spectroscopy results, most of the nuclides were short-lived radionuclides with half-lives of 100 days, except for ⁶⁰Co, ⁶⁵Zn, and ¹⁸¹W nuclides. The dose rate for three LINACs obtained immediately in front of the crosshair was in the range of 0.113 to 0.129 µSv/h. The maximum and minimum dose rates measured on weekends were 0.097 µSv/h and 0.092 µSv/h, respectively. Compared with the differences in weekday data, there was no significant difference between the data measured on Saturday and Sunday. Conclusions: Most of the detected radionuclides had half-lives <100 days, and the dose rate decreased rapidly. For equipment that primarily used energies ≤10 MV, when the equipment was transferred after at least 10 minutes after shutting it down, it is expected that there will be little effect on the workers' exposure.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.4
• /
• pp.51-60
• /
• 2021

Purpose: Tuberculosis(TB) care unit in public health center should be carefully considered to be re-designed as an infection safety environment for both patient and healthcare workers. So, for the enhancement, this study analyses the facility requirements for co-using the screening clinic as a TB and other respiratory disease care unit. Methods: Not only screening clinic facility guidelines from "A Study for Standard Triage Design and Construction Document" but also the guidelines of TB care and related medical facility are reviewed; KDCA, CDC, ECDC and WHO as a TB care, and FGI and NHS for facility. The facility requirements are summarized space, approach, and mechanical requirement in order. By comparing the summary and screening clinic facility guidelines, supplementations are proposed for TB care unit setting. Results: The result of this study shows that both the space program and mechanical requirement of the screening clinic and that of TB care unit are almost identical and could be share, which include direct airflow or negative air pressure in an exam room. To increase functional and economical efficiency, however, it is necessary to consider a multi-functional negative pressured room, So care process may be re-designed based on a room type; face-to-face room or glass wall inbetween. Implications: The facility guidelines for TB care unit of a public health center should be developed to build a safe environment for infection control by reflecting its medical plan and budget.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.36 no.2
• /
• pp.85-100
• /
• 2023

Objectives: To evaluate stress patterns and coping abilities in women with infertility by conducting in-depth interviews. Methods: Ten women with infertility who visited the Korean Medicine Hospital and provided consent after being informed of the purpose and method of the study were selected after meeting the inclusion/exclusion criteria. They were requested to complete a preliminary questionnaire developed by the researchers, the Infertility Stress Scale, and the Korean version of the Fertility Problem Inventory (FPI). Subsequently, each participant was interviewed individually. Results: The preliminary questionnaire was used to evaluate sensitivity to each type of infertility-related stress and ability to express and resolve it. Among all infertility stress types, the largest proportion, accounting for an average of 47.5±26.95%, was that felt by the patient herself. Considering stress awareness intensity, the stress felt by the patient was the highest, with an average score of 4.30±0.64. Relative stress sensitivity due to infertility was the highest, with an average score of 3.90±0.94. Compared with general work stress, the average ability to relieve stress related to problems with spouses was the highest, with a score of 2.50±1.20. The average Infertility Stress Scale score was 2.88±1.35 and FPI score was 2.87±2.52. Conclusions: The highest stress scores were observed for the following items: meaning of children, need for parenthood, and stress due to the diagnosis of infertility. The lowest stress scores were allocated to the item concerning relationships with friends and co-workers. Based on the in-depth interviews conducted after the survey, stress in women with infertility may be classified as emotional, physical, and economic. Thus, the requirement for providing appropriate psychological and emotional support depending on the stress type in addition to general medical treatment for infertility treatment was confirmed.

• Korea Journal of Hospital Management
• /
• v.27 no.4
• /
• pp.36-55
• /
• 2022

Purpose: This study explores the diffusion factors of corporate entrepreneurship among members of medical institutions. Methodology/Approach: The study explores the case of Granum Sinapis Center at Seoul St. Mary's Hospital, the first medical institution to establish a support organization for "innovation and start-up" as well as examines the changes in individual perceptions of participants in the institution's in-house contest. Among the 140 participants in the 2nd Contest held in 2022, seven participants were selected for interview in consideration of their job occupation and years of service. In-depth interviews were conducted for each individual. Findings: The participants applied for the contest under the direct and indirect influence of co-workers as well as compensatory factors. An individual's corporate entrepreneurial characteristics can be innate or acquired. The participants of the in-house contest had a positive experience in contrast to the existing organizational culture. The results reveal that emotional support from top and middle managers, along with the role of dedicated departments, can affect innovative behavior. Practical Implications: Contest participants reported personal growth, improved job satisfaction, and a change in perception of the organizational culture; they expressed their willingness to recommend. The results confirm the need to support such systems and shift focus to managerial (emotional) support and dedicated resources for developing individual entrepreneurship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.161-162
• /
• 2020

Major advanced ports around the world are preparing for environmental regulations such as increased efficiency of ports and low emission of pollutants in ports by utilizing fourth industrial technologies and ICT technologies such as AI, big data, self-driving cars and connected cars. It is also investing in developing fully unmanned terminals to solve the problem of workforce reduction caused by avoidance of 3D industries. However, the introduction of advanced technology is being delayed in domestic ports, which has led to a drop in port efficiency. In addition, port safety accidents have also occurred frequently, seriously affecting port marketing. Thus, the characteristics and types of each container terminal in Korea were analyzed and the factors for introducing autonomous cooperative driving were classified into five section factors and 15 division factors. Hierarchically classified factors will be surveyed on workers working in shipping lines, port construction, container terminals and related ministries.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2009

The purpose of this research was to investigate consumers' perceptions of foods that are most compatible with traditional Korean liquors. The study participants were a total of 402 customers who visited traditional Korean bars. Thirty-eight percent of the participants drank alcohol once or twice a week, and overall, 79% drank with friends or co-workers. Forty-three percent spent 30,000-40,000 won on alcoholic drinks, and half of them frequently drank distilled Soju whereas 27% drank beer. Those who drank traditional Korean liquor chose to do so because they viewed it as good for their health and the beverage was tasty. Participants selected Yakju/Baekseju (47.5%), Bokbunjaju (21.1%), and Takju/Makgeoli (8.2%) as the most compatible Korean traditional liquors with Korean traditional foods. The most compatible foods with Yakju were identified as Haemulpajeon (11.8%), Dubukimchi (9.8%), and Bossam/Suyuk/Pyeonyuk (7.5%). Bokbunjaju was viewed as a good match with Jangeogui (8.1%), Hunjeori (6.5%), and Saengseonhoe (6.4%). The respondents perceived Deodeokgui (6.7%), Saengseonhoe (5.9%), and Dubukimchi (5.6%) as the most compatible foods with Yakju with mushrooms. Chengju was viewed as a good pairing with Eomuktang (9.2%), Altang/Maeuntang (7.2%), and Saengseonhoe (6.8%). The respondents thought Takju went well with Haemulpajeon (17.7%), Dubukimchi (14.2%), and Kimchijeon (11.7%). And finally, Altang/Maeuntang (11.8%), Samgyeopsalgui (8.7%), and Honghaptang/Jogaetang (8.1%) were mentioned as the most compatible foods with distilled Soju.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.293-301
• /
• 2024

Purpose: Ministry of Environment statistics reveals more than 132 fire·explosion accidents in South Korea between 2014 and 2023. Among them, fire and/or explosion accidents are very impactive in their scale and consequence. This study aims to suggest a new method of reasonable way to calculate the ventilation rate of indoor facility handling hazardous chemicals based on their inflammability. Method: A new method to calculate the ventilation rate is based on the physicochemical properties of the chemicals handled, which is more reasonable compared with the current regulation based only on the floor area of the facility. Result: Considering the physicochemical properties, 178 chemicals based on their inflammability were studied and 168(94%) met the criteria for the current regulation. Some materials have been shown to require too much or too little ventilation rate. Conclusion: Through this study, a reasonable method of calculating the required ventilation rate was proposed. This should be applied to ensure the safety of workers to deal chemicals.

• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.14-23
• /
• 2023

The electric vehicle market is developing rapidly around the world. Also, parts of electric vehicles require precision.In order to produce high-precision motor cores,Press equipment must also have good precision. Drive motor cores are an important technology for electric vehicles. It uses a large high-speed press to mass-produce drive motor cores. Because it's a large high-speed press, there are many reasons why the precision is not good. One of the causes is vibration and noise. Recently, as environmental demands have become stricter, regulations on noise and vibration have been strengthened. It is important for press machines to reduce vibration first for sound insulation and dust proofing. This is because the "breakthrough" phenomenon occurs in the press. Dynamic precision is the precision under the load of the press, Design considering strain and stiffness shall be made. Vibration and noise may occur due to SPM of high-speed press,And vibration and noise can cause structural deformation of the press. Structural deformation of the press can affect the precision of the product.Noise and vibration also cause problems for workers and work environments. Problems with vibration and noise occur during press processing, and vibration and noise lead to damage to the mold or defects in the product. Reliability in high-quality technology must be secured with low noise and low vibration during press processing. Modular shape and deformation energy effects were analyzed through finite element analysis. In this study, a study on vibration and noise countermeasures was conducted through finite element analysis of a large high-speed press.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.17.1-17.6
• /
• 2023

The current 52-hour workweek in South Korea consists of 40 hours of regular work and 12 hours of overtime. Although the average working hours in South Korea is declining, it is still 199 hours longer than the Organisation for Economic Co-operation and Development average of 1,716 hours per year. In view to this, the South Korean government has now proposed to reform the workweek, mainly intending to increase the workweek to 69 hours when the workload is heavy. This reform, by increasing the labor intensity due to long working hours, goes against the global trend of reducing work hours for a safe and healthy working environment. Long working hours can lead to increased cerebrovascular and cardiovascular diseases, industrial accidents, mental health problems, and safety accidents due to lack of concentration. In conclusion, the Korean government's working hour reform plan can have a negative impact on workers' health, and therefore it should be thoroughly reviewed and modified.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.55-61
• /
• 2024

In this paper, in order to study the relationship between the safety culture of highway management agencies and disaster reduction activities (BCMS), a measurement tool was identified through previous research on safety culture, and the validity of the measurement tool was confirmed through exploratory factor analysis. I want to check. The subjects of the study were workers belonging to disaster reduction activity management system certification organizations among highway management organizations. The highway management agencies are the Korea Expressway Corporation, which manages the functional continuity of national highways nationwide, and 8 of the 21 private road agencies that manage the functional continuity of the highways. The safety culture measurement tool is an indicator that measures safety culture factors, and is reorganized by the researcher based on survey items from previous studies, with management/manager safety values and attitudes, safety communication, safety education and training, and safety regulations/management system as subfactors. A total of 24 questions were comprised of the survey tool. As a result of the study, the result of exploratory factor analysis was that the safety culture scale was extracted into four factors based on theoretical grounds, and the total cumulative variance was 80.360%. When checking the questions for each factor, it was found that all the questions loaded on the factor that was originally intended to be measured. Factor 1 is management, factor 2 is safety, and factor 3 is communication., Factor 4 was named education. Number of questions: 4 management questions, 3 safety questions, communication It consisted of 4 questions and 2 education questions.