• International Journal of Contents
• /
• 제8권3호
• /
• pp.42-51
• /
• 2012

Korea has entered into the Post Catching-up era and the necessity of new innovation strategy in response is being raised. This study argues the necessity of new innovation strategy and discusses the issue of co-ordination between R&D and Human Resource for that as the key factor. From empirical analysis, there seems to be restricted inflow of outstanding human resources to manufacturing sectors and lowering effectiveness of major even with the improved compatibility between major and job. Especially, it is severe in the industries with high R&D investment. It can be interpreted as an incoordination of the technological innovation efforts from the aspect of R&D investment with human resource utilization from the aspect of new human resource. The analytical result and interpretation suggests that there should be more active improvement on the co-ordination between innovative manufacturers' efforts and human resource utilization, in order to keep sustainable development.

• 논리연구
• /
• 제21권2호
• /
• pp.231-268
• /
• 2018

비트겐슈타인은 5.542에서 "A는 p라고 믿는다"가 "'p'는 p라고 말한다"의 형식으로 되어 있으며, "여기서 중요한 것은 어떤 한 사실과 어떤 한 대상 사이의 짝짓기가 아니라, 사실들의 대상들 사이의 짝짓기를 통한 그 사실들 간의 짝짓기"라고 주장한다. 그렇다면 "'p'는 p라고 말한다"는 정확하게 무엇을 뜻하는가? "사실들의 대상들"에서 "사실들"과 "대상들"은 무엇이며, 왜 여기에서는 두 가지 짝짓기가 문제되는가? 또한 "논리-철학 논고"에서 명제적 태도 진술은 뜻 있는 명제인가 아닌가? 더 나아가 비트겐슈타인은 러셀의 판단 이론을 어떻게 비판하고 있는가? 이 글에서 나는 비트겐슈타인 자신이 해명한 사고의 개념과 또 이와 관련된 램지의 언급을 바탕으로 이 물음들에 대해 대답하고자 한다. 한편 "A는 p라고 믿는다"와 같은 명제적 태도 진술은 어떤 경우에는 뜻 있는 명제이지만, 어떤 경우에는 "논리-철학 논고"의 유아론과 깊은 관련이 있다. 그렇기 때문에 "논리-철학 논고"에서 모든 명제적 태도 진술이 뜻 있는 명제라는 주장과 모든 명제적 태도 진술이 무의미하다는 주장은 둘 다 옳지 않다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.363-372
• /
• 2008

In this paper, knowledge-based approach using Support Vector Machines (SVMs) are used for estimating the coordinated zonal settings of a distance relay. The approach depends on the detailed simulation studies of apparent impedance loci as seen by distance relay during disturbance, considering various operating conditions including fault resistance. In a distance relay, the impedance loci given at the relay location is obtained from extensive transient stability studies. SVMs are used as a pattern classifier for obtaining distance relay co-ordination. The scheme utilizes the apparent impedance values observed during a fault as inputs. An improved performance with the use of SVMs, keeping the reach when faced with different fault conditions as well as system power flow changes, are illustrated with an equivalent 265 bus system of a practical Indian Western Grid.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2012년도 춘계 학술대회 논문집
• /
• pp.207-225
• /
• 2012

한국이 탈추격에 진입하였으며 이에 대응한 새로운 기술혁신전략이 필요하다고 제기되고 있는데, 본 연구에서는 이를 산업연관표에 기반한 산업별 생산방식 변화 등의 분석을 통하여 확인하며, 산업별 인력 구성의 변화를 중심으로 새로운 기술혁신전략을 모색하였다. 인력양성과 활용의 측면을 중심으로 한 학습과정(leaning process)이 R&D 등 혁신노력과 성공적으로 조응될 때 기대한 혁신성과가 실현될 수 있음을, 28산업분류 수준에서 대학 전공의 일에서의 유용성과 R&D투입간 조응성을 통하여 분석하고, 이러한 사항이 국가수준의 혁신정책에 통합되어야 함을 제시하였다.

• 복식문화연구
• /
• 제18권5호
• /
• pp.942-959
• /
• 2010

The Realization of Ubiquitous is achieved by magic mirror and it is required more concrete study to realize it's functionality. Especially its function of professional fashion co-ordinator for managing the appearance could be of further use. The Objective of this Study is to establish RFID chip data base to put into a computer for making use of the functionality of the magic mirror aiming at suggesting the available information on the total fashion co-ordination. I sought firstly the code with binary system determining the criteria of accessories to be input in a RFID chip. Secondly, as the image with cloth is an important element for the total fashion co-ordination, desired co-ordination among the emphasis, harmony, character, season and accent can be made selectable classifying into a limit element and a common element to extract the codes. Thirdly, necessary conditions were given to the generated codes using Visual C++ program of Microsoft and the extracted codes as per groups were compared and analyzed.

• 전기저널
• /
• 10호통권118호
• /
• pp.26-29
• /
• 1986

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4367-4385
• /
• 2016

With millions of people across the globe suffering from Parkinson's disease (PD), an objective, confirmatory test for the same is yet to be developed. This research aims to develop a system which can assist the doctor in objectively saying whether the patient is normal or under risk of PD. The proposed work combines the eye-hand co-ordination behaviour with the DaTscan images in order to determine the risk of this disorder. Initially, eye-hand coordination level of the patient is assessed through a hardware module. Then, the DaTscan image is analysed and used to extract certain geometrical parameters which shall indicate the presence of PD. These parameters are then finally fed into a Multi-Layer Perceptron Neural Network using Levenberg-Marquardt (LM) Back propagation training algorithm. Experimental results indicate that the proposed system exhibits an accuracy of around 93%.

• 건축사
• /
• 제3권8호통권8호
• /
• pp.49-52
• /
• 1968

• 기술사
• /
• 제19권2호
• /
• pp.34-42
• /
• 1986

These brief studies and reports of the use of exposed aggrigate precast concrete in practice are combined with a description of some notable co-ordination such as shop drawing, manufacturing and erection in the field construction. Above mentioned exposed aggrigate P. C. means architectural P. C. which was used to the VOTRAKON site in Riyadh, Saudi Arabia. Fabricated P. C. on the site without autoclaving and steam curing plant had been successfully carried out on this project-core building, conference room and others. The project designed by HOPE/VTN international INC. which is located in San Diego, California U.S.A. stands for vocational training and related support facilities contract. We had to submit shop drawings showing complete information for fabrication and installation of P. C. unit reinforcement. Also we should be indicated member dimension and cross section, location size and type of necessary for erection. We can delineate the following characteristic results. One of the most important things how to handle exposed aggrigate P.C. unit as specified was quality assurance and co-ordination for shop drawing, manufacturing and erection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.159-162
• /
• 2002

A software, called touch-one, is developed about the determination of short-circuit values and protective co-ordination in power system. The used solution algorithm reviewed intensively, and the protective co-ordination determination technique presented by using the circuit-breaker's current-limitation characteristic. The protective coordination concerns the behaviour of two devices placed in series in an electrical network, with a short-circuit downstream circuit-breaker. It has two basic principles: First, discrimination which is an increasing requirement of low voltage electrical distribution systems. Second, which is less well known: cascading, which consists of installing a device, whose breaking capacity is less than the three-phase short-circuit current at its terminals and helped by main circuit-breaker. With this software, we can construct a electric-power system which is reliable and economic according to user's purpose.