• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.21-30
• /
• 2004

In Ad-Hoc network, the cluster structure enables effective use of multiple channels, reduces the number of control messages, and increase the scalability of network, Also, it is employed for reducing the number of broadcast messages in an Ad-Hoc network. With the consideration of these advantages, it is desirable that a cluster structure keeps a few clusters in the network, Generally, the cluster formation scheme based on connectivity yields fewer clusters than the other schemes. However, the connectivity based scheme may yield even more clusters than the other schemes according to the network topology. In this paper, a cluster formation scheme dividing the cluster formation into two phases is proposed. In the first phase, the lowest connectivity host in neighborhood initiates the cluster formation. Then, an adjustment procedure for affiliating a lot of the lowest connectivity hosts is employed. In the second phase, the hosts which were not affiliated to the first phase clusters are grouped into one or more clusters through criterions of connectivity and host ID. As a result, the proposed scheme yields a fewer clusters compared with existing other schemes in fully distributed method. The simulation results proves that our scheme is better than LIDCP(3) and HCCP(3).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.4
• /
• pp.19-41
• /
• 2007

This research has a goal which is suggesting the way of constructing 'Cluster' which mean scheming the commencement of an enterprise in an early stage. Now it is reorganized into a IT industry structure 'Time-to market growth' is burst as a big issue. in that point, this research analyze the core success factor which is drawing from the existing IT industrial complex, and then it will be used to draw up to the 'Idealistic growth-support Cluster' on the basis of it, we pulled out various issues about the Corporate in the early stage of its growth. Therefore, this research is focused on presenting the ideal network(net) by considering the Network that organizations and business in Cluster or the network including the factors linked organizations and business in Cluster. therefore, this research carried out three big analysis. from the case investigation we pulled out the core growth factor, and then we approached the analysis of net structure for making application to Network Analysis. and then we analyzed that the characteristics of the Network after measuring by on the basis of analyzing core growth factor. and especailly, this research carried out the Core analysis for recognition of Core- support-frame by base Centrality Test on the net which is composed of growth support organizations at each Business. Judging from this, we can help to make full use of resources for the network analysis in Cluster and establish the Network Strategy by Structure comparison between the structure of industry-Cluster and ideal Business-support networks on the basis of the analysis from the Core-success-factor

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.255-260
• /
• 2020

In this study, we developed a method of improving the surface-enhanced Raman spectroscopy (SERS) response characteristics by depositing a nanoporous Ag metal thin film through cluster source sputtering after forming a pyramidal texture structure on the Si substrate surface. A reactive ion etching (RIE) system with a metal mesh inside the system was used to form a pyramidal texture structure on the Si surface without following a complicated photolithography process, unlike in case of the conventional RIE system. The size of the texture structure increased with the RIE process time. However, after a process time of 60 min, the size of the structure did not increase but tended to saturate. When the RF power increased from 200 to 250 W, the size of the pyramidal texture structure increased from 0.45 to 0.8 ㎛. The SERS response characteristics were measured by depositing approximately 1.5 ㎛ of nanoporous Ag metal thin film through cluster sputtering on the formed texture structure by varying the RIE process conditions. The Raman signal strength of the nanoporous Ag metal thin film deposited on the Si substrate with the texture structure was higher than that deposited on the general silicon substrate by up to 19%. The Raman response characteristics were influenced by the pyramid size and the number of pyramids per unit area but appeared to be influenced more by the number of pyramids per unit area. Therefore, further studies are required in this regard.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1306-1311
• /
• 2020

In this study, we proposed an anti-reflective nano-structure to improve the photoresponsivity of AlGaN UV photodiode that can be used as a receiver in a solar blind UV optical communication system. The anti-reflective nano-structure was fabricated by forming Ni nano-clusters on SiO2 film followed by etching the underneath SiO2 film. A sample with the anti-reflective nano-structure exhibited lower surface reflection along with less dependency on the wavelength in comparison with a sample without the nano-structure. Finally, a UV photodiode was fabricated by applying an anti-reflective structure produced by heat-treating a 2 nm-thick Ni layer. The photodiode fabricated with the proposed nano-structure exhibited noticeable improvement in the photoresponsivity at the wavelength range from 240 nm to 270 nm in comparison with the same photodiode with a SiO2 film without the nano-structure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.6-6
• /
• 1992

Ionized cluster beam deposition (ICBD) technique has been employed to fabricate high-purity crystalline polyimide (PI) film. The pyromellitic dianhydride (PMDA) and oxydianiline (ODA) were deposited using dual ICB sources, Fourier trans forminfraredspectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), and Transmission electron microscopy (TEM)study show that the bulk and surface chemical properties and the crystalline structure are very sensitive to the ICBD conditions such as cluster ion acceleration voltage and ionization voltage, At optimum ICBD conditions, the PI films have a maximum imidization, negligible impurities(∼1% isoimide), and a good crystalline structure probably due to the high surface migration energy and surface cleaning effect. These characteristics are superior to those of films deposited by other techniques such as colvent cast, vapowr deposition, or sputtering techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.41-47
• /
• 2012

MANET has vulnerable structure on security owing to structural characteristics as follows. MANET consisted of moving nodes is that every nodes have to perform function of router. Every node has to provide reliable routing service in cooperation each other. These properties are caused by expose to various attacks. But, it is difficult that position of environment intrusion detection system is established, information is collected, and particularly attack is detected because of moving of nodes in MANET environment. It is not easy that important profile is constructed also. In this paper, conformal predictor - support vector machine(CP-SVM) based intrusion detection technique was proposed in order to do more accurate and efficient intrusion detection. In this study, IDS-agents calculate p value from collected packet and transmit to cluster head, and then other all cluster head have same value and detect abnormal behavior using the value. Cluster form of hierarchical structure was used to reduce consumption of nodes also. Effectiveness of proposed method was confirmed through experiment.

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.473-481
• /
• 2015

In this study, we propose a clustering algorithm to enhance the performance of wireless sensor and actuator networks (WSANs). In each cluster, a multi-level hierarchical structure can be applied to reduce energy consumption. In addition to the cluster head, some nodes can be selected as intermediate nodes (INs). Each IN manages a subcluster that includes its neighbors. INs aggregate data from members in its subcluster, then send them to the cluster head. The selection of intermediate nodes aiming to optimize energy consumption can be considered high computational complexity mixed-integer linear programming. Therefore, a heuristic lowest energy path searching algorithm is proposed to reduce computational time. Moreover, a channel assignment scheme for subclusters is proposed to minimize interference between neighboring subclusters, thereby increasing aggregated throughput. Simulation results confirm that the proposed scheme can prolong network lifetime in WSANs.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.5
• /
• pp.482-486
• /
• 1992

Ion-molecule reactions of acetylene and mixed acetylene-ammonia cluster ions are studied using an electron impact time-of-flight mass spectrometer. The present results clearly demonstrate that $(C_2H_2)_n^+$ cluster ion distribution represents a distinct magic number of n=3. The mass spectroscopic evidence for the enhanced structural stabilities of $[C_6H_4{\cdot}(NH_3)_m]^+$ (m=0-8) ions is also found along with the detection of mixed cluster $[(C_2H_2)_n{\cdot}(NH_3)_m]^+$ ions, which gives insight into the feasible structure of solvated ions. This is rationalized on the basis of the structural stability for acetylene clusters and the dissociation dynamics of the complex ion under the presence of solvent molecules.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.8-15
• /
• 2011

In this paper, we propose a new structure modeling algorithm from 3D cloud points of terrestrial LADAR data. Terrestrial LIDAR data have various obstacles which make it difficult to apply conventional algorithms designed for air-borne LIDAR data. In the proposed algorithm, the field data are separated into several clusters by adopting the structure extraction method which uses color information and Hough transform. And cluster based Delaunay triangulation technique is sequentially applied to model the artificial structure. Each cluster has its own priority and it makes possible to determine whether a cluster needs to be considered not. The proposed algorithm not only minimizes the effects of noise data but also interactively controls the level of modeling by using cluster-based approach.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.103-109
• /
• 2013

Mobile ad hoc networks (MANETs) are infrastructure-less and stand-alone wireless networks with dynamic topologies. To support user's safety in MANETs, fundamental and various security services should be supported. Especially in mobile commercial market, one of the major concerns regarding security is user privacy. Recently, researches about security system to protect user privacy in cluster-based MANETs have been introduced. This paper propose a cluster reconfiguration protocol under anonymous cluster-based MANETs to enhance the network stability. The improved anonymous cluster-based MANETs can recover the network structure against abnormal states of clutserheads.