• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.539-549
• /
• 2017

In water treatment process using microfiltration membranes, manganese is a substance that causes inorganic membrane fouling. As a result of analysis on the operation data taken from I WTP(Water Treatment Plant), it was confirmed that the increase of TMP was very severe during the period of manganese inflow. The membrane fouling fastened the increase of TMP and shortened the service time of filtration or the cleaning cycle. The TMP of the membrane increased to the maximum of $2.13kgf/cm^2$, but it was recovered to the initial level ($0.17kgf/cm^2$) by the 1st acid cleaning step. It was obvious that the main membrane fouling contaminants are due to inorganic substances. As a result of the analysis on the chemical waste, the concentrations of aluminum(146-164 mg/L) and manganese(110-126 mg/L) were very high. It is considered that aluminum was due to the residual unreacted during coagulation step as a pretreatment process. And manganese is thought to be due to the adsorption on the membrane surface as an adsorbate in feed water component during filtration step. For the efficient maintenance of the membrane filtration facilities, optimization of chemical concentration and CIP conditions is very important when finding the abnormal level of influent including foulants such as manganese.

• Structural Engineering and Mechanics
• /
• v.86 no.1
• /
• pp.109-118
• /
• 2023

Any place where exercise is common, such as a club, sports hall, or school, is considered a place for teaching sports. When doing sports, a very safe environment for sports should be chosen. The athlete should consider the safety of sports facilities and equipment, and if there is a defect, he should refrain from exercising in these places. The safety of sports facilities is very effective in creating people's sports activities, with the benefits of staying away from physical harm, enjoying sports, and having mental peace. Everyone has the right to participate in sports and recreation and to ensure that they enjoy a safe environment. The ability to manage and solve issues that may arise plays the most critical role in creating a safe environment. The quality of construction materials used for the construction of sports facilities is of great importance. In this work, the resistance and water repellency of concrete constituents for the construction of sports buildings have been investigated by nanoscience. Nano-concrete material solves the main problem of concrete surfaces, i.e., the entry of water and humidity into the structure. It also gives it a self-cleaning ability with its water repellency. Nanoparticles are placed between pores and cover the cracks, which causes roughness in the surface structure of concrete. The high roughness of the surface of the coated concrete caused its super-hydrophobicity. In hydrophobic surfaces, the higher the contact angle, the more hydrophobic the surface will be. In order to investigate the hydrophobic properties, silica nanoparticles, silica nanoparticles, and fly ash were prepared on concrete, and their properties were analyzed.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.52-58
• /
• 2000

Spot welding, namely a kind of electric resisting welding has been used widely in field of automobile and aircraft industries because of easiness to apply. Specimens used in this study was a mild steel of 1.2mm thickness and the electrode was a Cu-Cr alloy of 6mm diameter. The surface sheared of specimens after testing of tensile shear was observed by SEM(scanning electron microscope) after ultrasonic cleaning for 10min., and microstructures and grain size of all specimens were measured with using of O.M.(Optical microscope). By the means of measurement and observations of tensile shear load, fatigue strength and share surface, the weldability of spot welding was evaluated. When tensile shearing testing, fracture starting point in all specimens was took place at the bond between HAZ(Heat affected zone) and nugget. With increasing in number of layers, fatigue strength was decreased. With increasing in electric current, grain size in the HAZ became more fine.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.952-954
• /
• 2000

In the cleaning-water treatment process, the flocculation machine is operated by the V.S motor when the coagulation-facility of the coagulation-process is operated. But after the flocculation machine is stopped by an instantaneous power failure, the transient takes place when the coagulation facility is re-started. To improve the transient state, we developed the reinforcement-circuit which had the function of soft-start and adapted to the field. As a result of this study, we reduced the damage of facilities and had the safety in maintaining the quality of water and improved the efficiency in the maintenance and the management.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.94-100
• /
• 2003

Gel-like compounds containing flammable solvents were prepared to use fur cleaning agents in field of innovative industries and general purposes. And experiments were conducted to improve the defects of liquified flammable solvents from the view point of safety and health hazards. Flammable solvents used in this study were several single component flammable solvents(turpentine oil, N-methyl-2-pyrrolidone(NMP), d-limonene) and multi component flammable solvent(gasoline and ethanol). For gelation of flammable solvents, commercially Known as Aerosil(equation omitted) 200 fumed silica and triethanolamine(TEA) were used as gelation agent dispersant. The analyses on properties of gel-like compounds was studied by gelation and viscosity test pH test, volatility test and differential scanning calorimetry(DSC) measurement. The experimental results indicate that gel-like compounds containing flammable solvents have pH stability, high viscosity, volatile organic compounds(VOC) control by the decrease of volatility and odor component generation, fluidity control etc. From the experimental values, it can be predicted that the safety in the working place is improved by manufacturing flammable solvents into gel-like compounds.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.4
• /
• pp.429-436
• /
• 2008

Membrane system has been increasingly considered as a safe and cost-effective water treatment process especially in case of small scale water works. This research is a basis of membrane application in water works through a long period test with obtaining operation skills and evaluation of water quality and cost competitiveness. For the research, the UF membrane system was installed in small water treatment plant that uses river-bed water as raw water. The system was consisted of 2 stage membrane and operated in constant flow mode (Flux: 1.5, 1.0, 0.9, 0.6). In each different flux condition, TMP trends were showed better results at lower flux condition. And through the high flux condition test, it is certified that membrane system could deal with breakdown of one stage. Water quality of permeate was satisfied the water quality standards especially turbidity. To know what mainly causes fouling on membrane, the test by membrane with several cleaning agents and EDX analysis have done in lab. Through the tests, ferrous concentration in raw water, backwashing water and membrane surface etc. was high and it causes fouling inside and outside of membrane. So acid cleaning using organic acid such as oxalic acid is necessary in Chemical in Place (CIP). At the economical aspect the electrical cost of membrane system is higher than that of slow sand filtration but labor cost can be reduced by automation. However, the use of labor should be determined considering effectiveness and stability of operation. Because during the operation, there are several breakdown such as electrical shock by lightning, water drop in summer, etc.

• Journal of the Korean Society of School Health
• /
• v.24 no.1
• /
• pp.12-22
• /
• 2011

Purpose: The purpose of this study was to identify incidence of nonfatal unintentional injuries (accidents) among students, and to investigate compensation payment for five years (2000~2004) in schools located in Seoul. Methods: Subjects were 14,783 students injured among elementary, middle and high school students. The accumulated data for 5 years (2000~2004) was from the Seoul School Safety and Insurance Association. Chi-square, ttest, logistic regression, and MANCOVA were conducted. Results: The most frequent accidents occurred among males (73.2%), and in special school students (3.86 per 1,000) followed by middle school students (3.05 per 1,000), in May (0.25 per 1,000) followed by June and October, in physical education classes (0.73 per 1,000) followed by special activities (0.40 per 1,000), recess (0.31 per 1,000) and lunch (0.29 per 1,000). Fractures (0.86 per 1,000) were followed by mild injuries (0.39 per 1,000), joint and ligament injuries (0.31 per 1,000), and teeth injuries (0.26 per 1,000). After adjusting for potential confounding variables, the highest means of final compensation payment was for burns (810 thousand KRW) followed by the teeth injuries (506 thousand KRW), cleaning injuries (550 thousand KRW) followed by injuries incurred during special activities (510 thousand KRW) and injuries incurred at special schools (556 thousand KRW). Conclusion: In school, the highest incidences of nonfatal unintentional injuries were in special schools, among males, fractures and physical education. However, the highest compensation payments were for burns, and injuries taking place at special schools and during cleaning hour. Proper health education including teaching healthy habits for safety/injury prevention is needed to prevent injuries and decrease compensation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.2
• /
• pp.15-25
• /
• 1989

The purpose of this study was to supply data of resident′s participation direction about children′s playground management. In this study, use disposition and consciousness of resident about management are investigated and analyzed at the 5 children′s playground in Taegu city. The results of this study were as follows: The result of resident′s use disposition showed ; visiting frequency was "everyday or occasionally(53.5% )", and visiting purpose was "for children(47.9 %), for rest, sports, spare time(24.6%)" and visiting time was equal1y except forenoon, and staying time was "within 1 hour(73.1%)". The satisfaction about park facilities and park existence of residents′ is composed importance degree of which is convenient, manyfunction spaces, managemental of tree and facilities in order. 9.3% of residents were proposal experience about management, and concern ratio of circumferenmce showed highly "concerned answer(45.9%)" About consciousness ratio of management subject, 46.5% of residents depended on authorities leading. Wholly, recognition ratio showed low. Park administration of authorities leading and lack of resident′s concern wore thought as its problem. About experience of cleaning beautification rout children′s playground, 14.2% of residents answered "be experience". Participation type of desirous management showed highest "cleaning of fallen leaves and rubbish(22.7% )". So, residents wished to take part in such simple managements. Charge of necessary tool and cost for management showed highest "partial charge of residents (47.9% )". About participant ratio of self government activity made by residents, 75.1% of residents answered "don′t be participated". A reason of nonparticipation showed "insufficiency of place and opportunity (38.7%), deficiency of time(17.97)". Activity of initiative and existing group can be done as a fine device in future. Desirous events for children and residents showed highest "play guidence for children or meeting for aged milan(40.7% )". Therefore, it will have to consider enough about resident′s participation program for activity of use and efficient management of children′s playground.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.5
• /
• pp.322-330
• /
• 2009

In order to utilize NAND flash memory as storage media which does not allow update-in-place and limits the number of block erase count, various garbage collection policies supporting wear-leveling have been investigated. Conventional garbage collection policies require cleaning-index calculation for the entire blocks to choose a block to be garbage-collected to support wear-leveling whenever a garbage collection is required, which results in performance degradation of system. This paper proposes a garbage collection policy which supports wear-leveling using a threshold value, which is in fact a variance of erase counts and by the maximum erase count of all blocks, without calculating the cleaning-index. During garbage collection, the erase cost is minimized by using the Greedy Policy if the variance is less than the threshold value. It achieves wear-leveling by excluding the block with the largest erase count from erase target blocks if the variance is larger than threshold value. The proposed scheme shows that a standard deviation approaches to zero as the erase count of blocks approaches to its upper limit and the measured speed of garbage collection is two times faster than the conventional schemes.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.8-14
• /
• 2006

The pigment extraction of Opuntia ficus-indica has been conducted to develop useful natural dyes in place of synthetic dyes which are suspected to bring serious environmental pollutions. The dyeing ability on wool fabric by addition of ascorbic acid and several mordants were investigated by means of color measurement. In addition, the fastness of washing, perspiration, rubbing, light, dry cleaning, effect on bacterial reduction and UV-B protection were also investigated. From these investigation, it is suggested that the pigment extracted from Opuntia ficus-indica can be used as a source of natural dyes and the obtained result are as follows. 1. Maximum absorption band (${\lambda}max$) of Opuntia ficus-indica extract is 533nm. 2. The wool fabric dyed with Opuntia ficus-indica extract has stable color by the addition of ascorbic acid and is achieved with addition of 0.1% ascorbic acid, 0.5% several mordant, and three repeated dying at $50^{\circ}C$ for 1.5hr. 3. The wash fastness of the dyed wool fabric when it is washed with neutral detergent is more effective than alkaline detergent. The dry cleaning fastness of the dyed wool fabric is more excellent. In addition, the perspiration fastness of the dyed wool fabric is increased by mordanting method. And than the rubbing fastness of the dyed wool fabric is showed excellent under dryness and wetness. Light fastness of the dyed wool fabric, however is showed inferiority. 4. The wool fabric dyed with Opuntia ficus-indica extract is showed effective bacterial reduction and UV-B protection is increased remarkably.