• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.36-40
• /
• 2002

The purpose of study was to suggest an investigation of citizen's attitude on harmful insects in house. This study was consisted of four parts, such as basic investigation (housing shape, housing material, the period of house constructed, a cleaning condition), condition of kitchen, condition of living room condition of bathroom. The environmental pollution was increased by the development of industry and urbanization in modern. And also the clean of house has related with air quality such as pollutants and harmful insects etc. Because dwelling shape of urban come to be crowded, shut tightly and high buildings, the air quality of indoor was gradually polluted by several irregular cause. In one of housing pollution, the harmful insects was important any other than indoor air pollution. The problems of kitchen were the odor of food waste, discharge system of sewage and harmful insects. The important issues of living room were mold and construction materials, then important them of bathroom were easing nature and discharge system of sewage. A kind of the harmful insects in house investigated cockroach> mosquito> ant>fly. Finally, it appeared that the control of harmful insects can be applied to the improvement of indoor air pollutant which are difficult to be controlled in house.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1315-1320
• /
• 2008

An experimental study was carried out to study the solid-liquid mixture upward flow in a vertical and inclined annulus with rotating inner cylinder. Lift forces acting on a fluidized particle plays a central role in many importance applications, such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport and cleaning of particles from surfaces, etc. Field measurements have revealed that the pressure drop over a borehole during drilling of a slim oil well or a well with a long reach can depend significantly on the rotation speed of the drill pipe. An accurate prediction of the annular frictional pressure drop is therefore important for conditions where the annular clearance is small. Effect of annulus inclination and drill pipe rotation on the carrying capacity of drilling fluid, particle rising velocity, and pressure drop in the slim hole annulus have been measured for fully developed flows of water and of aqueous solutions.

• The Research Journal of the Costume Culture
• /
• v.18 no.5
• /
• pp.872-891
• /
• 2010

This study was an exploratory research to classify the types of green fashion marketing of the fashion companies in South Korea and analyse the present cases of each type. To analyse the current cases of green fashion marketing strategies, we researched all sorts of newspapers, magazines, publications of fashion companies, and web sites from 2008 to 2009. As a result, we categorized 5 types of green fashion marketing as follows ; eco-friendly fabrics (natural fabrics, recycled fabrics, biodegradable fabrics), re-use or re-form(reuse after cleaning and/or repairing and reformation through transformation and combination of raw materials), green certifications(ISO 14001, GOTS, OES, etc.), eco-friendly management and operation, and green marketing promotions. Based on the results, we proposed the green marketing strategies for fashion companies to progress toward the proper direction of green marketing. First of all, companies should escape from the narrow view point limited to the product itself. Then they have to focus on developing and execution of sustainable merchandising, manufacturing, logistics, and waste strategies.

• Journal of Haehwa Medicine
• /
• v.9 no.2
• /
• pp.197-209
• /
• 2001

In the Literal Study on the Effect of Acupuncture and Moxibustion Treatment on the Bungru, the results were as follows. 1. The Bungru means an abnormal bleeding of femail genetalia. and is devided to Bungjung and Bungha. 2. The etiological factors of Bungru are heat of blood, asthenic coldness. asthenia of chong and ren channels. deficiency of blood, deficiency of vital energy, stagnated blood. and asthenia of spleen & stomach. 3. In the frequency of practical use in Acupuncture treatment, the order was Ren channel, Bladder meridian. Liver meridian, Spleen meridian and Kidney meridian. 4. In the frequency of practical use in Moxibustion treatment, the order was Extra Points, Ren channel, Bladder meridian, Spleen meridian, Liver meridian and Kidney meridian. 5. The most using points of Acupuncture and Moxibustion Treatment on the Bungru were Samumgyo(Sp6), Taechung(Liv3), Hyoihae(Sp10), Umgok(B10), Kihae(CV6), Chung-guk(CV3), Kwanwon(CV4), Unbaek(Spl) and etc. 6. The charicteristics of the most used points were nourishing the spleen, regulating the middle warmer, cleaning the blood, promoting blood circulation, activating blood circulation, promoting the vital energy, regulating the obstruction of vital energy, nourishing the kidney and so on. 7. In the new Acupuncture therapy, Ear-acupuncture, Head-acupuncture, Foot-acupuncture and Skin-acupuncture were used.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.2
• /
• pp.17-26
• /
• 2014

Purpose: This study tries to explore and analyse Service Attached Elderly Housing of Japan in order to prepare new elderly housing type effectively for aged society of Korea. Service Attached Elderly Housing was introduced in 2011 and it includes existing elderly housing of Japan such as Designated Elderly Housing, Elderly Friendly Housing and Superior Elderly Housing. Methods: Historical transition of Japanese elderly housing and background of the introduction of Service Attached Elderly Housing have been reviewed first. Thereafter research team visited to 3 elderly housings of Japan providing elderly services such as elderly care, meal, cleaning, washing, safety check, entertainment, etc. Based on the literature survey and field trip, the characteristics of Service Attached Elderly Housing have been drew out. Results: As the characteristics of Service Attached Elderly Housing of Japan, mixed use facility, community based housing, generation mix, barrier free design, and provision of daily life service for the elderly have been identified. Implications: Not only physical consideration including Universal Design but also elderly services such as elderly care, meal, housework, safety check, entertainment and so on are necessary for the supply of elderly housing.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.451-460
• /
• 2021

Objectives: The purpose of this study is to examine occupational risk factors that affect the mental health (depression, anxiety, anger, insomnia, self-esteem, trauma) of hospital facility workers. Methods: A survey was conducted from November 17, 2020 to December 1, 2020 for 700 non-medical workers (Temporary and contract workers: cleaning, security, information, office workers, etc.) working at a general hospital in Seoul. Results: As a result of the study, the risk of musculoskeletal disorders was found to have a significant effect on depression, anxiety, insomnia, and trauma. Noise had a significant effect on depression and anger, dust hazard had an effect on depression and self-esteem, and high temperature had a significant effect on anxiety and insomnia. Conclusions: Based on these results, it is necessary to examine the influence of occupational risk factors to improve the mental health of non-medical hospital facility workers.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.737-744
• /
• 2021

An investigation is conducted to study a solid-liquid mixture vertically upward hydraulic transport of solid particles by non-Newtonian fluids in the Mud system. Rheology of particulate suspensions in viscoelastic fluids is of importance in many applications such as particle removal from surfaces, transport of proppants in fractured reservoir and cleaning of drilling holes, etc. In this study a clear acrylic pipe was used in order to observe the movement of solid particles. Annular velocities varied from 0.4 m/s to 1.2 m/s. The mud systems which were utilized included aqueous solution of sodium carboxymethyl cellulose (CMC) solutions. Main parameters considered in the study were inner-pipe rotary speed, fluid flow regime and particle injection rate. Solid volumetric concentration and pressure drops were measured for the various parameters such as inclination angle, flow rate, and rotational speed of inner cylinder.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.95-99
• /
• 2023

Recently Machine Learning has been considered as one of the active research areas of Computer Science. The various Artificial Intelligence techniques are used to solve the classification problems of environmental sciences, biological sciences, and medical sciences etc. Due to the heterogynous and malfunctioning weather sensors a considerable amount of noisy data with missing is generated, which is alarming situation for weather prediction stockholders. Filling of these missing values with proper method is really one of the significant problems. The data must be cleaned before applying prediction model to collect more precise & accurate results. In order to solve all above stated problems, this research proposes a novel weather forecasting system which consists upon two steps. The first step will prepare data by reducing the noise; whereas a decision model is constructed at second step using regression algorithm. The Confusion Matrix will be used to evaluation the proposed classifier.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.150-151
• /
• 2022

Blasting is a method that uses explosives to crush the ground. This method is a highly efficient ground cleaning method that can secure high efficiency in a short time. However, explosions can damage local properties and produce high noise and vibration. Therefore, it is important to be careful because there are disadvantages such as the occurrence of many complaints from the surrounding area. In this paper measured and analyzed the noise and vibration generated during blasting at the blasting site in Korea. The noise and vibration generated during blasting were measured by ES03303.2b and ES03402.2a at a distance of 6 m, 12 m from the blasting point. As a result of the measurement, there was little difference between small and medium scale except for precision vibration blasting at a distance of 6m, but noise difference according to blasting scale was evident at a distance of 12m. As a result of the measurement, the maximum noise level was reduced to 5.5 dB(A) and the vibration level was reduced to 7.7 dB(V). In the future, the reliability of the test results can be further improved through additional tests, and it is judged that noise and vibration prediction models based on blasting methods, amount of charge, measuring distance, etc. can be developed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.603-612
• /
• 2017

Accidents associated with hazardous materials, including oil and HNS, in maritime transportation show increasing trend. Therefore, preventive countermeasures for such accidents should be provided. The purpose of this study is to analyze level of risk on human loss and potential damage to environment, using data on domestic marine accidents carrying hazardous materials (2002~2014), and identify high-risk accident types for urgent risk management which needs findings of accident causes and proper mitigation measures. High-risks on human loss are explosion and suffocation, occurred in process of ship maintenance and tank cleaning. On the other hand, high-risk on environmental damage is spill caused by ship accidents (collision, grounding and etc.). Especially, spill occurs during loading operation of oil and HNS onboard a ship. Strict operation supervision/management and safety education/training on a regular basis could prevent accidents, because human factors such as not wearing safety gear and careless cargo handling cause most of the marine accidents.