• Clean Technology
• /
• v.3 no.2
• /
• pp.57-73
• /
• 1997

Metal cleaning process is a technology which removes oil, dust and soil etc. on the surface of metal utilizing cleaning agents. These contaminants disturb the following processes such as plating and painting etc. if they are not removed. Thus, metal cleaning is typically an environmentally hazardous activity. Until recently, vapor degreasers as utilizing chlorinated solvents have been relatively cheap, extraordinarily versatile and waste disposal costs have been perceived as insignificant. Today, however, it is readily apparent that Industry's reliance upon chlorinated solvents as metal cleaners have resulted in a myriad of environmental, health and safety concerns. Therefore, this paper studies on a parameter and a sort of the alternative cleaning agents for the optimum cleaners. Also, a great deal of effort has been devoted to developing alternative metal cleaning technologies in advanced countries and some processes are being commercialized among them. We are going to consider alternative aqueous cleaning agents replacing organic chlorinated solvents and to pursue a domain application through a successful improvement case.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.47-51
• /
• 2011

In this paper, we propose the cleaning process system to remove micro-particles, various impurities, unnecessary residues, etc. for liquid crystal display manufacturing processes. This system is structured with cleaning, rinse and drying process using the chemical cleaning of alkaline water and the physical cleaning of SHS(supper heating steam). And we shows cleaning effects of alkaline water and remove effects of SHS.

• Journal of Conservation Science
• /
• v.11 no.1 s.14
• /
• pp.28-37
• /
• 2002

The cleaning in conservation treatment of cultural heritage is very important process. For the best conservation treatment of cultural heritage, except having a good detergency, the cleaning agent must be able to keep the heritage from the secondary deposition and re-soiling, damage and etc. In this paper, the dust (lichen, algae, dust, etc.) on the surface of stone made heritage was treated with some kinds of solvents and analyzed with FT-IR to develop a cleaning agent for stone made cultural heritage. And the cleaning ability to the dust and the corrosion ratio to the granite of the cleaning agent was investigated. Nonionic surfactants were good for treatment of stone-made cultural heritage. The reason is that nonionic surfactants are stable in acidic solution, and possess low reactivity with the compound of stone and low possibility to the second contamination, and build up the reactivities of acids and oxidants. A new cleaning agent composed with $H_2O_2/HF/NP-10$ shows a good cleaning ability for the conservation treatment of stone made cultural heritage.

• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.55-63
• /
• 1982

We are studying on the home economics, particularly tools and machines used in household affairs. The object of this paper is to rationalize house cleaning method and to improve the used cleaning tools. We have made a social survey in Korea about the real situation of house cleaning as the first phase of this research. The contents are as follows: 1) The consciousness of housemakers for house cleaning. 2) The methods of house cleaning. 3) The used type of vacuum cleaner. 4) Merits and demerits of vacuum cleaner. 5) Troubles of vacuum cleaner etc. The results has been made in comparison with the same social survey in japan and a small scale different survey in The United States of America by auther in 1979. The results are as follow (in Korea). 1. The almost of housemakers are affirmative in charge of household affairs(95%). 2. In household affairs, only 9% of housemakers dislike cleaning work, but 40% of housemakers do not a cleaning work as a daily periodically. 3. In general household, they do a cleaning work with broom, duster and dust cloth, and then the cleaning work is faily backward in mechanization(The possession of vacuum is 19%). 4. The main dissatisfaction of vacuum cleaner is a noise, and also the difficulty of the cleaning in a corner of the room is shown in high percentage too.

• Clean Technology
• /
• v.7 no.1
• /
• pp.13-25
• /
• 2001

With fast advancement of fine machineries and semiconductor industries in recent decades, the ultra-cleaning of organic chemicals, submicron particles from contaminated unit equipments and products such as silicon wafers becomes one of the most important steps for further advancement of such industries. To date, two kinds of ultra cleaning techniques are used; one is the wet-cleaning and the other is the dry cleaning. In case of wet cleaning, removal of organic contaminants and submicron particles is made by DIW with additives such as $H_2O_2$, $H_2SO_4$, HCl, $NH_4OH$ and HF, etc. While the wet cleaning method is most widely adopted for various occasions, it is inevitable to discharge significant amount of toxic waste waters in environment. Dry cleaning is an alternative method to mitigate environmental pollution of the wet cleaning with maintaining comparable degree of cleaning to the wet cleaning. Although there are various concept of dry cleaning have been devised, the dry cleaning with environmentally-benign solvent such as carbon dioxide proven to show high degree of cleaning from the contaminated porous surface as well as from the bare surface. Thus, special global attention has been placing on this technique since it has important advantages of simple process schemes and no environmentally concern, etc. Thus, this article critically reviews the state-of-the-art of the supercritical fluid drying with emphasis on the thermo-physical characteristics of the supercritical solvent, environmental gains compared to other dry cleaning methods, and the generic aspects of the basic design and processing engineering.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.26-33
• /
• 2010

We searched at the "PubMed.gov" and "jendodon.com" sites to conduct a literature review on dental instruments that are reused in clinical settings and on infection control involving pre-disinfection or sterilization cleaning/rinsing. The keyword "dental clean" was used for the Web search. We found the present official definition of instrument cleaning performed prior to disinfection or sterilization rather limiting ("removal of foreign matter (soil, organism, etc.) from the instruments"). Thus, we proposed to expand the definition to include the removal of oils applied to protect the metallic instruments and from corrosion, stains, and rust resulting from the frequent reuse of the instruments. Clinicians are found to clean their dental instruments (a) immediately after treating their patients or (b) following their treatment but not immediately afterward. In the latter case, we recommend presoaking to be added. Ultrasonic sterilization of 5~15 minutes is found to be more effective in terms of eliminating residual matter from the instruments compared to other methods. To check on the cleaning results, we recommend visual inspection, which can be quick and practical in clinical settings. The latest products being developed and marketed on the market address the related problems. Nonetheless, research must be continued on the effects of presoak, cleaning/rinsing, disinfection, and high-temperature or heating-based sterilization on the dental instruments and on dental clinicians' practices in cleaning, disinfection, and sterilization. We advise dental clinicians to select the proper cleaning methods and detergents for their instruments to help eliminate or prevent corrosion, staining, and rusting, to reduce the maintenance costs, and to ensure user-friendly instruments/apparatuses.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.107-113
• /
• 2010

The object of this research is to conform of practicable possibility and recycling of producing junk after citrus fruits is processed. With extracting d-limonene oil that have 70~90% a component of oil out of junk citrus peel, making certain the about 12000ppm concentration of it. Limonene derived from citrus in jeju using conventional synthetic detergents can be replaced with the development of environmentally friendly natural detergent investigated the possibility. Mostly due to ocean dumping, disposal and cause environmental problems by recycling natural citrus cleaner alternative to the research conducted on the possibility. Cleaning efficiency with temperature did not affect the largest concentrations were able to identify the difference between cleaning efficiency. At least 10% of the d-limonene oil could be from the cleaning performance, increasing the concentration of the cleaning efficiency was increased in size. Ultrasonic is very high removal efficiency under the conditions shown in the cause of pure self-generated ultrasonic cleaning power as co-effects of d-limonene oil appears to chemical cleaning effect of ultrasonic cavitation occurs in the physical cleaning effect due to a combination of synergistic stability is maximized by low concentrations of d-limonene oil in a short time showed an excellent cleaning ability. Having the ability of cleaning at the same time, considering the side recycling in the junk citrus peels reflects possibility of basic materials utility eco-friendly in the skin soap, bath soap, cosmetics etc, through ability of exclusion a contaminant in based cleaning effect(EC) it can prospect substitution effect environmentally in the pre existence synthetic detergents.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.181-183
• /
• 2008

Four different subtilisins of protease were investigated to see their effects on the cleaning activity. The cleaning solution was formulated with various non-ionic surfactants and other additives such as propylene glycol, triethanolamine, pH balancer etc. to evaluate their effect on enzyme activity as well. Evaluation of formulated cleaning solution was carried under K0120 using pre-soiled textiles from EMPA. The results showed that the cleaning activity on soil removal was not severly influenced by surfactant but the enzyme mostly. In addition, the activity of enzymes was not much affected by the type of surfactants as long as the surfactants were non-ionic. Liquinase among the four enzymes used in this study showed the best performance on soil removal, especially blood stain.

• Conservation Science in Museum
• /
• v.6
• /
• pp.73-83
• /
• 2005

To understand the influence of wet cleaning performed in the course of preserving paper items, the change of matter properties by before and after wet cleaning was observed. Specifically, structural and optical qualities and strength were measured. The result showed that wet cleaning caused a substance change in the paper items and particularly weakened the structure material of pigments, Chinese ink, dyes, etc.