• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.89-117
• /
• 2018

The Korean companies are intensifying competition with not only domestic companies but also foreign companies in globalization. In this environment, it is essential activities not only for large companies but also Small and Medium Enterprises (SMEs) to get and develop the core competency. Particularly, SMEs that are inferior to resources of various aspects, such as financial resources etc., can make innovation through effective R&D investment. And then, SMEs can occupy a competency and can be survive at the environment. Conventionally, the method of "self-development" by using only the internal resources of the company has been dominant. Recently, however, R&D method through cooperation, also called "Open Innovation", is emerging. Especially SMEs are relatively short of available internal resources. Therefore, it is necessary to utilize technology and resources through cooperation with external companies(such as joint development or contract development etc.) rather than self-development R&D. In this context, we confirmed the effect of SMEs' factors on sales in Korea. Specifically, the factors that SMEs hold are classified as 'Technical characteristic', 'Company competency', and 'R&D activity' and analyzed how they influence the sales achieved as a result of R&D. The analysis was based on a two-year statistical survey conducted by the Korean government. In addition, we confirmed the influence of the factors on the sales according to the R&D method(Self-Development vs. Open Innovation), and also observed the influence change in 29 industrial categories. The results of the study are summarized as follows: First, regression analysis shows that twelve factors of SMEs have a significant effect on sales. Specifically, 15 factors included in the analysis, 12 factors excluding 3 factors were found to have significant influence. In the technical characteristic, 'imitation period' and 'product life cycle' of the technology were confirmed. In the company competency, 'R&D led person', 'researcher number', 'intellectual property registration status', 'number of R&D attempts', and 'ratio of success to trial' were confirmed. The R&D activity was found to have a significant impact on all included factors. Second, the influence of factors on the R&D method was confirmed, and the change was confirmed in four factors. In addition, these factors were found that have different effects on sales according to the R&D method. Specifically, 'researcher number', 'number of R&D attempts', 'performance compensation system', and 'R&D investment' were found to have significant moderate effects. In other words, the moderating effect of open innovation was confirmed for four factors. Third, on the industrial classification, it is confirmed that different factors have a significant influence on each industrial classification. At this point, it was confirmed that at least one factor, up to nine factors had a significant effect on the sales according to the industrial classification. Furthermore, different moderate effects have been confirmed in the industrial classification and R&D method. In the moderate effect, up to eight significant moderate effects were confirmed according to the industrial classification. In particular, 'R&D investment' and 'performance compensation system' were confirmed to be the most common moderating effect by each 12 times and 11 times in all industrial classification. This study provides the following suggestions: First, it is necessary for SMEs to determine the R&D method in consideration of the characteristics of the technology to be R&D as well as the enterprise competency and the R&D activity. In addition, there is a need to identify and concentrate on the factors that increase sales in R&D decisions, which are mainly affected by the industry classification to which the company belongs. Second, governments that support SMEs' R&D need to provide guidelines that are fit to their situation. It is necessary to differentiate the support for the company considering various factors such as technology and R&D purpose for their effective budget execution. Finally, based on the results of this study, we urge the need to reconsider the effectiveness of existing SME support policies.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.1
• /
• pp.151-175
• /
• 2015

The focus of regional innovation policies is shifting from a central government to local governments. No one denies the fact that the innovation will lead regional development and shall be created in such a way that it will be appropriate for regional circumstances. However, the central government and local governments have not arrived yet at a conclusion on what innovation policies are appropriate for regional circumstances. This leads to a consequence that is inefficient not only at a national level, but also at a regional level. This research, given this problem, aims to find out the characteristics and differences in innovation types among the regions in Korea and suggests appropriate policy implications by classifying such characteristics and differences. This research, given these objectives, classified regions in consideration of the various indicators that comprise the innovation suggested by existing related researches and illustrated policies based on such characteristics and differences. In this research clustering analysis based on multiple factor analysis was applied. Supplementary researches on dynamically analyzing stability in regional innovation types, establishing systematic indicators based on the regional innovation theory, and developing additional indicators are necessary in the future.

• Proceedings of the Technology Innovation Conference
• /
• 2002.06a
• /
• pp.238-256
• /
• 2002

Competitiveness of a nation can be explained by the concept of national innovation systems(NIS). As components of NIS, industry clusters become the issue in analysing innovative activity of an economy. Innovative clusters can be identified by the innovation survey or other economic activity data. Input-output Table was used widely as a tool for quantitative analysis, This paper classifies seven clusters in Korean industry based on inter-industries trade of intermediary goods and services, Maximizing procedure method is used in analysing input-output table. Identified clusters are Textiles/chemicals, Construction/Material, Instrument/Equipment, Automobile, Services, Energy, and Agriculture/Food cluster, Among these clusters, some different characteristics in R&D portfolios are detected. R&D investment characteristics of each cluster give us significant implications in understanding innovative dynamics of Korean industry.

• Journal of the Korean Society of Costume
• /
• v.64 no.5
• /
• pp.76-90
• /
• 2014

The Design Protection Act of Korea classifies industrial designs into examined-based and unexamined-based articles. For design application and registration under the DPA, applicable product for the design needs to be chosen in order for it to be registered. Clothing and personal belongings under class B in the classification list are subject to unexamined-based articles. A sound and logical classification system will lead to higher administrative efficiency as well as assurance of more convenience for the system users. This paper examines the suitability of the design classification for clothing and personal belongings and purposes to suggest improvements.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.24-33
• /
• 2001

As we know, the quality of processes is technically depicted by variation, a product or process with the best quality must naturally require the variation as less as possible. The variation is usually reduced with many ways, say, by adjusting parameters settings under robust design with many turns expensive experiments. So ones are trying to reach the robustness by detecting cheap and simple methods. In this paper, a both practical and simple technique for quality improvement, namely reducing the variation, by data classification is studied. First, all possible system factors are included, which may dominate the variation law. And then we make use of the past observations and their classification as well as boxplot charts to find out the internal rule between the variation and the system factor. Next, adjust the location of the system factor according to the rule so that the variation could, to some extent, be lessened. Finally, two typical quality improvement cases based on data classification are presented.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.183-205
• /
• 2007

An investigation was undertaken of the optimal discriminant model for predicting the likelihood of insolvency in advance for medium-sized firms based on the technology evaluation. The explanatory variables included in the discriminant model were selected by both factor analysis and discriminant analysis using stepwise selection method. Five explanatory variables were selected in factor analysis in terms of explanatory ratio and communality. Six explanatory variables were selected in stepwise discriminant analysis. The effectiveness of linear discriminant model and logistic discriminant model were assessed by the criteria of the critical probability and correct classification rate. Result showed that both model had similar correct classification rate and the linear discriminant model was preferred to the logistic discriminant model in terms of criteria of the critical probability In case of the linear discriminant model with critical probability of 0.5, the total-group correct classification rate was 70.4% and correct classification rates of insolvent and solvent groups were 73.4% and 69.5% respectively. Correct classification rate is an estimate of the probability that the estimated discriminant function will correctly classify the present sample. However, the actual correct classification rate is an estimate of the probability that the estimated discriminant function will correctly classify a future observation. Unfortunately, the correct classification rate underestimates the actual correct classification rate because the data set used to estimate the discriminant function is also used to evaluate them. The cross-validation method were used to estimate the bias of the correct classification rate. According to the results the estimated bias were 2.9% and the predicted actual correct classification rate was 67.5%. And a threshold value is set to establish an in-doubt category. Results of linear discriminant model can be applied for the technology financing banks to evaluate the possibility of insolvency and give the ranking of the firms applied.

• Information Systems Review
• /
• v.3 no.2
• /
• pp.245-260
• /
• 2001

While past knowledge management researches have focused on conceptualization and strategic implications, knowledge asset researches attempt to provide practical guidelines for companies. However, each research classifies knowledge asset from its own perspective, and thus it is not a trivial task to leverage consistent and inclusive criteria in managing corporate knowledge asset. The objective of this paper is to develop a knowledge asset classification schema on the basis of the three business functions: customer relationship management, product innovation, and infrastructure management. To demonstrate the feasibility of our schema, it has been applied to 9 Korean corporations. Knowledge assets are evaluated according to core capabilities, which are main drivers of sustainable competitive advantages. The results of case study show that the leveraged classification schema reflects current knowledge asset management and characteristics of corporations. Our finding is that most top-quality knowledge management corporations are likely to develop well-balanced knowledge asset.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.421-431
• /
• 2021

Purpose: For improving outgoing quality, this study presents a novel sampling framework based on predictive analytics. Methods: The proposed framework is composed of three steps. The first step is the variable selection. The knowledge-based and data-driven approaches are employed to select important variables. The second step is the model learning. In this step, we consider the supervised classification methods, the anomaly detection methods, and the rule-based methods. The applying model is the third step. This step includes the all processes to be enabled on real-time prediction. Each prediction model classifies a product as a target sample or random sample. Thereafter intensive quality inspections are executed on the specified target samples. Results: The inspection data of three Samsung products (mobile, TV, refrigerator) are used to check functional defects in the product by utilizing the proposed method. The results demonstrate that using target sampling is more effective and efficient than random sampling. Conclusion: The results of this paper show that the proposed method can efficiently detect products that have the possibilities of user's defect in the lot. Additionally our study can guide practitioners on how to easily detect defective products using stratified sampling

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.269-287
• /
• 2016

This paper proposes the newly developed a classification scheme for Management of Technology (MOT) research, by analyzing research papers published in major academic journals of MOT. To refine our proposed classification, we conducted a contents analysis after collecting 696 papers published in 11 major international journals and 2 representative domestic journals including Journal of Korean Technology Innovation Society, from 2006 to 2012. Our findings show that this classification scheme is composed of total 8 methodologies within each research design such as conceptual qualitative, empirical qualitative, conceptual quantitative, and conceptual quantitative researches. In addition, we provide research reviews based on characteristics between 1) domestic and foreign researchers, 2) domestic and international journals, and 3) different major domestic journals as follows. Firstly, the underlying trends of research design and methodologies in MOT research are concentrated in empirical studies regardless of the origin of researchers and journals. However, the proportion of theoretical discussion in the international journals is higher than that of theoretical discussion in the domestic journals. Secondly, there are many more empirical qualitative researches and archival researches written in the Journal of Korean Technology Innovation Society, whereas the proportion of empirical quantitative research and conceptual research published in the Journal of Technology Innovation is higher than that. From the results, this paper will contribute to choosing research designs and methodologies more suitable to research purpose for future MOT researchers and provide the direction for concrete systematic approach on research designs and methodologies.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.173-178
• /
• 2021

The article reveals the essence of the concept of "pedagogical innovation" and identifies trends in the development of a modern educational institution. A qualitative analysis of the scientific literature in the field of innovation science has been carried out. The essence of the concept of "pedagogical innovation" is revealed. The modern classification of pedagogical innovations is given. The factors of the success of the introduction of pedagogical innovations are determined. The main trends in the development of modern educational institutions are outlined.