• 한국안전학회지
• /
• 제17권4호
• /
• pp.189-195
• /
• 2002

I-단면 곡선보 (curved beam)의 모멘트 하중 하에서 비틀림(warping)을 포함한 평면외 (out-of-plane)의 좌굴을 미분구적법 (DQM)을 이용하여 해석하였다. 다양한 경계조건(boundary conditions) 및 굽힘각(opening angles)에 따른 임계모멘트 (critical moments)를 계산하고, DQM의 해석결과는 해석적 해답 (exact solution) 과 비교 분석하였다. DQM은 적은 요소(grid points)를 사용하여 정확한 해석결과를 보여주었고, 두 경계조건 (고정-고정, 고정-단순지지)하에서 새로운 결과 또한 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.101-109
• /
• 2010

This paper reports active control of clamped beams using acceleration feedback controllers (AF). The equations of motion of clamped beam under force and moment pairs were derived and the equations of AF controllers were formulated. The effect of the parameters - gain and damping ratio - of the AF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the AF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies. The increase of the damping ratio of the AF controller leads to decrease the magnitude of the open loop transfer function and modifies its phase characteristics to be more stable. Three AF controllers connected in parallel were then proposed. Each AF controller is tuned at the $2^{nd}$, $3^{rd}$ and $4^{th}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 3 modes can be obtained.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1190-1199
• /
• 2010

This paper reports active control of clamped beams using acceleration feedback controllers (AF). The equations of motion of clamped beam under force and moment pairs were derived and the equations of AF controllers were formulated. The effect of the parameters - gain and damping ratio - of the AF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the AF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies. The increase of the damping ratio of the AF controller leads to decrease the magnitude of the open loop transfer function and modifies its phase characteristics to be more stable. Three AF controllers connected in parallel were then proposed. Each AF controller is tuned at the 2nd, 3rd and 4th modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 3 modes can be obtained.

• 충청수학회지
• /
• 제5권1호
• /
• pp.111-121
• /
• 1992

A new method(EVF method) is applied to get lower bounds to frequencies of rotating uniform beams which are clamped or simply supported at one end and free at the other. For the upper bounds, the Rayleigh-Ritz method is employed. Numerical results are presented.

• Advances in nano research
• /
• 제4권1호
• /
• pp.51-64
• /
• 2016

This paper investigates the effects of thermal load and shear force on the buckling of nanobeams. Higher-order shear deformation beam theories are implemented and their predictions of the critical buckling load and post-buckled configurations are compared to those of Euler-Bernoulli and Timoshenko beam theories. The nonlocal Eringen elasticity model is adopted to account a size-dependence at the nano-scale. Analytical closed form solutions for critical buckling loads and post-buckling configurations are derived for proposed beam theories. This would be helpful for those who work in the mechanical analysis of nanobeams especially experimentalists working in the field. Results show that thermal load has a more significant impact on the buckling behavior of simply-supported beams (S-S) than it has on clamped-clamped (C-C) beams. However, the nonlocal effect has more impact on C-C beams that it does on S-S beams. Moreover, it was found that the predictions obtained from Timoshenko beam theory are identical to those obtained using all higher-order shear deformation theories, suggesting that Timoshenko beam theory is sufficient to analyze buckling in nanobeams.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.374-383
• /
• 2011

A numerical model based on a mode method coupling beams and a rectangular plate is proposed to estimate radiation characteristics of an edge-clamped rectangular plate. The radiation efficiency and radiation power in the audio frequency range including the critical frequency can be predicted. The proposed model is rather simple and straightforward and gives reliable results comparing to the previous studies. The estimated radiation characteristics are compared to those of the pinned condition plates and also to those based on the formulae proposed by Maidanik. The radiation efficiency of the clamped plate seems a little higher than that of the pinned plate in the frequency range of corner and edge modes. It is explicitly shown that the power as well as efficiency at high frequencies is not influenced by these edge boundary conditions.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.361-371
• /
• 2020

Exact solution for nonlinear behavior of clamped-clamped functionally graded (FG) buckled beams is presented. The effective material properties are considered to vary along the thickness direction according to exponential-law form. The in-plane inertia and damping are neglected, and hence the governing equations are reduced to a single nonlinear fourth-order partial-integral-differential equation. The von Kármán geometric nonlinearity has been considered in the formulation. Galerkin procedure is used to obtain a second order nonlinear ordinary equation with quadratic and cubic nonlinear terms. Based on the mode of the corresponding linear problem, which readily satisfy the boundary conditions, the frequencies for the nonlinear problem are obtained using the Jacobi elliptic functions. The effects of various parameters such as the Young's modulus ratio, the beam slenderness ratio, the vibration amplitude and the magnitude of axial load on the nonlinear behavior are examined.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.2858-2864
• /
• 2012

곡선보 (curved beam)의 내평면 모멘트 및 등분포하중 하에서 평면내 (in-plane) 좌굴 (buckling)을 미분구적법(DQM)을 이용하여 해석하였다. 다양한 경계조건 (boundary conditions)과 굽힘각 (opening angles)에 따른 임계모멘트 및 임계하중을 계산하였다. DQM의 해석결과는 해석적 해답 (exact solution) 결과와 비교하였으며, DQM은 적은 요소 (grid points)를 사용하여 정확한 해석결과를 보여주었다. 두 경계조건(고정-고정, 단순지지-고정)하에서 새 결과를 또한 제시하였다.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.447-454
• /
• 2011

This paper reports a filtered velocity feedback(FVF) controller, which is an alternative to direct velocity feedback(DVFB) controller. The instability problems due to high frequency response under DVFB can be alleviated by the suggested FVF controller. The FVF controller is designed to filter out the unstable high frequency response. The FVF controller and the dynamics of clamped beams under forces and moments are first formulated. The effects of the design parameters(cut-off frequency, gain, and damping ratio) on the stability and the performance are then investigated. The cut-off frequency should be selected not to affect the system stability. The magnitude of the open loop transfer function(OLTF) at the cut-off frequency should be small. As increasing the gain of the FVF controller, the magnitude of the OLTF is increased, so that the closed loop response can be reduced more. The enhancement of the OLTF at the cut-off frequency is reduced but the phase behavior around the cut-off frequency is distorted, as the damping ratio is increased. The control performance is finally estimated for the clamped beam. More than 10 dB reductions in velocity response can be achieved at the modal frequencies from the first to eighth modes.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.651-659
• /
• 2001

이 논문은 두 변수 탄성지반 위에 놓인 불연속 변단면 수평 곡선부재의 자유 진동에 관한 연구이다. 회전관성과 전단변형효과를 고려하여 두 변수 탄성지반 위에 놓인 변단면 수평 곡선부재의 자유진동을 지배하는 무차원 상미분방정식을 유도하였다. 변단면은 불연속 변단면으로 채택하였고, 회전-회전, 회전-고정 및 고정-고정의 단부조건을 갖는 원호형, 포물선형, 정현형, 타원형 곡선보의 고유진동수를 산출하였다. 수치해석의 결과로 무차원 고유진동수와 곡선부재의 변수들 사이의 관계를 표 및 그림에 나타내었으며 진동형의 예를 그림과 같이 나타내었다.