• Journal of Applied Biological Chemistry
• /
• 제64권1호
• /
• pp.39-48
• /
• 2021

가뭄은 작물의 성장과 생산성을 방해하는 비 생물학적 스트레스 중 하나다. 비 생물학적 스트레스에 대응하기 위해서는 식물이 불리한 환경 조건에서 스트레스에 나타내는 분자 조절 네트워크를 이해해야 한다. 비 생물학적 스트레스 (가뭄에 대응)에 대처할 수 있는 조합을 선별하기 위한 실험에서 스트레스 조건에서만 발현되는 5개의 가뭄 스트레스 유도성 프로모터를 선별하였으며, 이 중 36개의 cis-regulatory element를 선별하였다. 그 결과 가뭄 스트레스에서만 발현되는 유전자의 프로모터에서 cis-regulatory element를 새롭게 조합하여 미세 제어 조절을 할 수 있는 2 개의 합성프로모터(BL1, BL2)를 제작하였다. 합성프로모터를 포함한 형질전환식물(BL1-GUS, BL2-GUS)의 분석은 합성프로모터가 건조 조건에서 형질전환식물 내의 GUS 유전자의 발현을 증가시키는 것을 통하여 확인하였다. 또한 Transient activation assay를 통해 DREB1A와 DREB2C에 의해 합성프로모터가 활성화되는 것도 확인하였다. 이러한 결과는 가뭄 특이적인 cis-regulatory element의 조합에 의해 제작한 합성프로모터가 다양한 비 생물학적 스트레스에 반응하고, 식물의 성장 지연을 유발하지 않고 스트레스에 효과적으로 대응할 수 있을 것이라 예상할 수 있다.

• 식물조직배양학회지
• /
• 제25권2호
• /
• pp.89-93
• /
• 1998

Tomato phenylalanine ammonia-lyase 5 (tPAL5) was identified that alternate initiation sites were utilized differentially in response to environmental stimuli (Lee et al, 1992b). In this study, we tried to look into tissue -or cell- specific expression pattern of tPAL5 gene by fusing with ${\beta}-glucuronidase$ (GUS) gene in transgenic tobacco plants. In transgenic plants, root and stem extracts contained 8~12 fold higher levels of GUS activity than petiole or leaf tissue while the highest levels of induction was observed from leaf tissue by mechanical wounding (5~11 fold). In trans-sections of stems and petioles, GUS activity was restricted to phloem cells(outer region) of developing vascular bundle and mainly at apical tip region in the root tissues. The levels of GUS activity was drastically reduced (10~12 fold reduction) when the 5'-upstream region of tPAL5 gene (-1151bp from ATG codon) was deleted up to -665. The levels of GUS expression, however, raised up by 6~8 fold when deleted up to -455. Therefore, we conclude that there are positive cis-elements at the region -1151 to -1008 and at -455 to -195 while the negative cis-element is at -1008 to -455.

• 한국발생생물학회지:발생과생식
• /
• 제16권4호
• /
• pp.379-384
• /
• 2012

Lhx8 (LIM homeobox 8) gene encodes a LIM homeodomain transcriptional regulator that is preferentially expressed in germ cells and critical for mammalian folliculogenesis. However, Lhx8 DNA binding sequences are not characterized yet. We aimed to identify and characterize a cis-acting sequence of germ-cell specific transcriptional factor, Lhx8. To identify Lhx8 DNA binding element, Cyclic Amplification of Sequence Target (CAST) Analysis was performed. Electrophoretic Mobility Shift Assay (EMSA) was processed for the binding specificity of Lhx8. Luciferase assay was for the transcriptional activity of Lhx8 through identified DNA binding site. We identified a putative cis-acting sequence, TGATTG as Lhx8 DNA binding element (LBE). In addition, Lhx8 binds to the LBE with high affinity and augments transcriptional activity of luciferase reporter driven by artificial promoter containing the Lhx8 binding element. These findings indicate that Lhx8 directly regulates the transcription of genes containing Lhx8 binding element in oocytes during early folliculogenesis.

• 생명과학회지
• /
• 제33권1호
• /
• pp.34-42
• /
• 2023

환경 스트레스 신호 인지부터 스트레스 반응 유전자의 발현에 이르는 신호전달 네트워크에 있어서, 스트레스 반응 프로모터의 cis-조절 요소와 거기에 결합하는 다양한 전사인자는 환경 스트레스에 대한 식물의 적응을 조절한다. 애기장대 AP2/ERF 전사인자 패밀리 중 그룹 VII ERF는 RAP2.12, RAP2.2, RAP2.3, AtERF73/HRE1, AtERF71/HRE2 유전자를 포함하며, 저산소 스트레스 반응에서 중요한 역할을 하는 것으로 알려져 있다. 본 연구에서는 HRE1 프로모터의 저산소 반응 부위를 동정하였다. 이를 위해 1,000 bp, 800 bp, 600 bp, 400 bp, 200 bp, 100 bp, 그리고 50 bp HRE1 프로모터 부위를 포함하는 벡터를 제작하여 프로모 터 활성을 분석한 결과, -200에서 -100 프로모터 부위가 HRE1의 저산소 반응에서 중요함을 확인하였다. HRE1의 -200에서 -100 프로모터 부위에는 저산소 반응 cis-조절 요소로 알려진 ERF-결합 부위와 DOF-결합 부위가 존재하는데, 이는 HRE1의 발현이 ERF 전사인자와 DOF 전사인자에 의해 조절될 수 있음을 시사한다. 전체적으로, 본 연구를 통해 HRE1 의 저산소 스트레스 반응에는 -200에서 -100 프로모터 부위에 존재하는 cis-조절 요소가 중요한 역할을 한다는 것을 확인하였다.

• Journal of Plant Biotechnology
• /
• 제42권4호
• /
• pp.356-363
• /
• 2015

나무의 유전 공학적 연구를 위해서는 목본 고유의 유전자 및 프로모터 연구가 필수적이다. 우리는 포플러(P. alba ${\times}$ P. glandulosa)의 Pagns-LTP 유전자의 867 bp 프로모터를 분리하였고, ${\beta}$-glucuronidase (GUS) reporter 유전자를 이용한 프로모터의 형질전환 포플러를 제작하여 특성 분석하였다. Pagns-LTP 유전자는 어린뿌리에서 강하게 발현되었고 어린잎에서는 약하게 발현되었으며, 그밖에 다른 조직에서는 발현되지 않았다. 또한, 프로모터의 활성은 뿌리와 어린잎에서 한정되었으며 어린뿌리의 세포 전체에서 강한 활성을 나타내었다. 이에 포플러 ns-LTP 프로모터 내의 cis-element를 조사하고 현사시나무에서 Pagns-LTP 프로모터를 분리한 후 활성을 분석하였다. 프로모터 내의 cis-element를 분석한 결과, 조직 특이적 발현과 호르몬 및 스트레스에 반응하는 다양한 cis-element가 존재함을 확인하였다. 이를 통해 포플러의 ns-LTP는 생장뿐만 아니라, 스트레스에도 관여할 것이라고 추측할 수 있었다. 본 연구는 목본의 유전자 기능 분석 및 다양한 응용 연구를 위해 유용하게 이용될 수 있는 도구로서의 가능성을 제시하였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.188-188
• /
• 1996

In order to gain insight into the mechanism of the regulation of cytochrome P450IAl by arylhydrocarbon, the 5'-flanking region of a trout CYP450IAl 5'flanking DNA was cloned into pCAT-basic vector and it was transfected into Hepa-1 cells. 3MC treatment to hepa Ⅰ cells transfected with fish CYP450IAl-CAT construct results in mRNA increased by 2.81 fold when it was compared with that of control This increase of mRNA was decreased by concomitantly treated flavonoids such as morin. The levels of CAT mRNA that was treated with morin was 29.2-58.0% of 3MC stimulated CAT mRNA. Further investigation to find out if there are DRE, XRE or negative regulatory cis element in CYP450IA1 gene was undertaken. Results of the deletion study of 5'flanking DNA of trout P450IA indicate the existance of the negative(-1600 ～ -1300). CAT mRNA was about two-fold higher in deleted trout CYP450IAl-CAT construct transfected cells compared to the wi Id type trout CYP450IAl-CAT construct transfected cells. And The stimulatory effect of 3MC was no longer observed in col Is containing deleted CAT construct. [Supported by grants from the Korean Ministry of Education]

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1670-1682
• /
• 2018

The further improvement of submarine propulsion is associated with the modularity of accumulator-fed inverters, such as cascaded inverters (CIs). CI technology guarantees smooth output voltages with reduced switch frequencies under linear loads. However, the output voltages of CIs are distorted under rectifier loads. This distortion requires harmonic suppression technology. One such technology is the repetitive controller (RC), which is commonly applied but suffers from poor performance in propulsion systems. In this study, the FFT spectrum of a CI under rectifier load is analyzed, and the harmonic contents are uneven in magnitude. For the purpose of harmonic suppression, the control gains at each harmonic frequency should be seriously considered. A RC with a specific harmonic gain compensation (SHGC) for CIs is proposed. This method provides additional control gains at low-order harmonic frequencies, which are difficult to achieve with conventional RCs. This SHGC consists of a band-pass filter (BPF) and proportional element and is easy to implement. These features make the proposed method suitable for submarine propulsion. Experimental results verify the feasibility of the improved RC.

• Bioinformatics and Biosystems
• /
• 제2권2호
• /
• pp.52-57
• /
• 2007

The computational discovery of transcription factor binding site is one of the important tools in the genetic and genomic analysis. Rough prediction of gene regulation network and finding possible co-regulated genes are typical applications of the technique. Countless motif-discovery algorithms have been proposed for the past years. However, there is no dominant algorithm yet. Each algorithm does not give enough accuracy without extensive information. In this paper, we explore the possibility of combining multiple algorithms for the one integrated result in order to improve the performance and the convenience of researchers. Moreover, we apply new high order information that is reorganized from the set of basis predictions to the final prediction.

• Genomics & Informatics
• /
• 제5권4호
• /
• pp.174-178
• /
• 2007

The earliest stages of mammalian embryogenesis are governed by the activity of maternally inherited transcripts and proteins. Cytoplasmic polyadenylation of selected maternal mRNA has been reported to be a major control mechanism of delayed translation during preimplantation embryogenesis in mice. The presence of cis-elements required for cytoplasmic polyadenylation (e.g., CPE) can serve as a useful tag in the screening of maternal genes partaking in key functions in the transcriptionally dormant egg and early embryo. However, due to its relative simplicity, UA-rich sequences satisfying the canonical rule of known CPE consensus sequences are often found in the 3'-UTR of maternal transcripts that do not actually undergo cytoplasmic polyadenylation. In this study, we developed a method to confirm the validity of candidate CPE sequences in a given gene by a multiplex comparison of 3'-UTR sequences between mammalian homologs. We found that genes undergoing cytoplasmic polyadenylation tend to create a conserved block around the CPE, while CPE-like sequences in the 3'-UTR of genes lacking cytoplasmic polyadenylation do not exhibit such conservation between species. Through this cross-species comparison, we also identified an alternative CPE in the 3'-UTR of tissue-type plasminogen activator (tPA), which is more likely to serve as a functional element. We suggest that verification of CPEs based on sequence conservation can provide a convenient tool for mass screening of factors governing the earliest processes of mammalian embryogenesis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.703-707
• /
• 1997

DUe to the requirement of high precision and the complexity during the tool design for electron gun elements, it sometimes causes human-errors. Also, in the case of beginners, they have more trial and error than skilled engineers. To remove these problems and increase the productivity in the practice field, it need the deveiopment of CAD system for electron gun element tools. Through this study, a CAD system of electron gun element tools which is used by used by knowledge base system including expert's technology in the practics, has been developed. To developed this system, it has used C-language under HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system. An application of this system will provide effective aids to the designer in this field.