• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1424-1428
• /
• 2004

A new design for deburring tools for intersecting holes is introduced. The tool tip is mounted on a slender cantilever assembled into a circular shank. The tool tip has been design to cover ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on AL6061. With the new design, mild exit burrs with exit angles greater than 45$^{\circ}$ are successfully removed. For large burrs with smaller exit angles, however, the deburring could be incomplete.

• 대한토목학회논문집
• /
• 제32권6D호
• /
• pp.623-636
• /
• 2012

회전교차로는 평면교차로의 일종으로 교차로 중앙에 원형교통섬을 두고 교차로를 통과하는 자동차가 원형교통섬을 우회하도록 하는 교차로 형식이다. 본 연구에서는 신호교차로와 회전교차로의 운영 및 경제적 효과를 분석하기 위해서 제주지역의 5개 교차로를 중심으로 회전교차로 설치에 따른 비교 분석을 실시하였다. 분석 결과, 차량평균지체 측면에서 신호교차로에 비해 회전교차로가 65.6%%에서 91.77%의 개선효과가 있는 것으로 분석되었다. 차량운행비용과 시간가치비용을 종합한 교통혼잡비용의 효과를 분석한 결과, 년간 58.59%(D intersection)에서 81.69%(B intersection)의 비용절감 효과가 있는 것으로 분석되었다. 이를 통해 제주지역의 경우 신호교차로에 비해서 회전교차로가 운영 효과가 뛰어난 것으로 조사되었다.

• 대한토목학회논문집
• /
• 제31권2D호
• /
• pp.209-215
• /
• 2011

회전교차로는 교차로 중앙에 원형 교통섬을 두고, 교차로를 통과하는 자동차가 이 원형 교통섬을 우회하도록 하는 평면교차로의 일종이다. 국내에서는 국토해양부에서 회전교차로 설계지침을 2004년 잠정발표 하였다. 이것은 우리나라의 교통여건이 검토되지 않은 외국의 사례를 검토 소개한 것이다. 또한, 최근 국가경쟁력강화를 위해 녹색성장의 일환으로 회전교차로에 대한 관심이 집중되고 있다. 그러나 현재 기존 회전교차로 잠정지침에서는 회전교차로의 용량 및 설치 여건, 그리고 계획절차 등에 관해 기술하고 있으나, 유형별 설계요소가 개략적이고 명확하지 않아 회전교차로 설계 적용에 있어 어려움이 존재하고 있다. 본 논문에서는 국내에 설치된 많은 유형중 접근로의 모든각이 90도인 4지 회전교차로와 72도, 45도, 30도로 한군데에서 교차하는 5지 회전교차로에 대해 모의실험을 실시하였다. 1차로 회전교차로에서 내접원 직경이 커질수록 평균통행 시간이 감소하며, 5지 회전교차로의 모든 교차각에서는 시간당 교통량이 2,000대까지는 90도로 교차하는 4지 회전교차로와 비슷한 효과를 얻을 수 있는 것으로 분석되었다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.143-151
• /
• 2017

PURPOSES : The purpose of this study is to develop models of accidents occurring at circular intersections related to the time of day and night and driver gender, and to provide countermeasures for safer circular intersections. METHODS : Seventy intersections built before 2008 were surveyed for inclusion in the modeling. Traffic accident data from 2008 to 2014 were collected from the TAAS data set of the Road Traffic Authority. Sixteen variables explaining the accidents including geometry and traffic volume were selected from the literature and seven multiple linear regression models were developed using SPSS 20.0. RESULTS : First, the null hypotheses, that the number of traffic accidents are not related to driver gender or time of day, were rejected at a 5% level of significance. Second, seven statistically significant accident models with $R^2$ value of 0.643-0.890 were developed. Third, in daytime models by gender, when the right-turn-only lane was selected as the common variable, the number of lanes, presence of driveways and speed humps, diagrammatic exit destination sign, and total entering traffic volume were evaluated as specific variables. Finally, in nighttime models by gender, when the diagrammatic exit destination sign was selected as the common variable, total entering traffic volume, presence of right-turn-only lanes, number of circulatory road way lanes, and presence of splitter islands and driveways were identified as specific variables. CONCLUSIONS:This study developed seven accident models and analyzed the common and specific variables by time of day and gender. The results suggest approaches to providing countermeasures for safer circular intersections.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.907-910
• /
• 1993

This paper describes the use of fuzzy control and decision making to simulate the control of traffic flow at an intersection. To show the value of fuzzy logic as an alternative method for control of traffic environments. A traffic environment includes the lanes to and from an intersection, the intersection, vehicle traffic, and signal lights in the intersection. To test the fuzzy logic controller, a computer simulation was constructed to model a traffic environment. A typical cross intersection was chosen for the traffic environment, and the performance of the fuzzy logic controller was compared with the performance of two different types of conventional control. In the hardware verifications, fuzzy logic was used to control acceleration of a model train on a circular path. For the software experiment, the fuzzy logic controller proved better than conventional control methods, especially in the case of highly uneven traffic flow between different directions. On the hardware si e of the research, the fuzzy acceleration control system showed a marked improvement in smoothness of ride over crisp control.

• 한국CDE학회논문집
• /
• 제11권5호
• /
• pp.375-383
• /
• 2006

Presented in this paper is a new fast and robust algorithm generating NC tool path for 2D pockets with islands. The input shapes are composed of line segments and circular arcs. The algorithm has two steps: creation of successive offset loops and linking the loops to a tool path. A modified pairwise technique is developed in order to speed up and stabilize the offset process, and the linking algorithm is focused on avoiding thin-wall cutting and minimizing tool retractions. The proposed algorithm has been implemented in C++ and some illustrative examples are presented to show the practical strength of the algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.278-285
• /
• 2001

Aluminum/Aramid Fiber Reinforced Plastic(Al/AFRP) laminates are applied to the fuselage-wing intersection. The main objective of this study was to evaluate the delamination zone behavior of Al/AFRP with a saw-cut and circular hole using average stress criterion and the effect of notch geometry. Mechanical tests were carried out to determine the cyclic-bending moment and delamination zone observed ultrasonic C-scan pictures. In case of Al/AFRP containing saw-cut specimen, the shape and size of the delamination zone formed along the fatigue crack. However, in case of Al/AFRP containing circular hole specimen, the shape and size of delamination zone formed two types. first type, delamination zone formed along the fatigue crack. Second type, not observed fatigue crack. Therefore, delamination zone was formed dependently of the circular hole shape.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.17-22
• /
• 2003

This paper presents a new circular curve fitting approach of articulated manipulators, based on least square. The approach aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a starting point and an ending point. First a spherical fitting should be performed, using least squares. Then the circular curve fitting can be resulted from the intersection of the fitted sphere and the plane obtained from 3 points, i. e., a starting point, an ending point and the center of a sphere. The proposed algorithms are shown to be efficient by using MATLAB-based simulation.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.178-184
• /
• 2012

This study deals with the traffic accidents by weather condition. The objectives are to comparatively analyze the characteristics, and to develop the models of traffic accidents by weather condition. In pursuing the above, this paper gives particular attentions to testing the differences between two groups, and developing the models(Poisson and negative binomial regression) using the data of domestic circular intersections. The main results are as follows. First, three Poisson models and one negative binomial models which were all statistically significant were developed using the number of accident and EPDO by the clear weather and other as the dependant variables. Second, the differences between two models were comparatively analyzed using the chosen variables. This paper might be expected to give some implications to traffic safety policy-making to reduce and prevent the traffic accidents in circular intersections.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.27-35
• /
• 2009

회전교차로(roundabout)는 영국에서 교통서클이 갖는 문제를 해결하기 위해 개발되었다. 영국은 1966년 모든 회전교차로에서 "우선권(give-way)"제도를 도입하였는데, 그것은 교차로에 진입하는 차량은 교차로 내에서 가장 멀리 회전하는 차량에 우선권을 주거나 양보해야 한다는 것이다. 그러나 미국이나 유럽에서 사용되는 회전교차로는 우리나라에서 사용되지 못하고 있다. 본 연구의 목적은 회전교차로의 효과를 비교 분석하는데 있다. 이를 위해 회전교통량의 변화를 반영하여 분석 시나리오를 작성하고, 회전교차로와 신호교차로를 SIDRA를 이용하여 평균제어지체를 분석한다. 주요 결과는 다음과 같다. 첫째, 1차로 회전교차로는 총 진입 교통량이 2,000pcph 이하일 때, 신호교차로보다 효과적이 된다. 둘째, 2차로 회전교차로는 총 진입 교통량이 3,200pcph 이하일 경우에 신호교차로보다 효과적이 된다. 셋째, 좌우회전 전용차로 설치 교차로일 경우 회전교차로의 면적이 적게 소요되는 것으로 분석된다.