1 |
Hansen, A. and Arbab, F., 'An Algorithm for Generating NC Tool Paths for Arbitrarily Shaped Pockets with Islands', ACM Transactions on Graphics, Vol. 11, No.2, pp. 152-182, 1992
DOI
|
2 |
Held, M., 'On the Computational Geometry of Pocket Machining', Springer-Verlag, 1991
|
3 |
Norman L. Jones, Michael J, Kennard, Alan K. Zundel, 'Fast Algorithm for Generating Sorted Contour Strings', Computers & Geosciences, Vol. 26, No.7, pp. 831-837, August 2000
DOI
ScienceOn
|
4 |
Park, S. C. and Chung, Y. C., 'Offset Tool-path Linking for Pocket Machining', Computer Aided Design, Vol. 34, No.4, pp. 299-308, April 2002
DOI
ScienceOn
|
5 |
Martin Held, 'Voronoi Diagrams and Offset Curves of Curvilinear Polygons', Computer Aided Design, Vol. 30, No.4, pp. 287-300, April 1998
DOI
ScienceOn
|
6 |
Takashi Maekawa and Nicholas M. Patrikalakis, 'Computation of Singularities and Intersections of Offsets of Planar Curves', Computer Aided Geometric Design, Vol. 10, No.5, pp. 407-429, October 1993
DOI
ScienceOn
|
7 |
Preparata, F. P. and Shamos, M. I., 'Computational Geometry-An Introduction', Springer Verlag, New York, 1985
|
8 |
Joseph O'Rourke, 'Computational Geometry in C', Cambridge University Press, 1995
|
9 |
김동수, '다면체 모델 가공을 위한 곡선기반 방법', 박사학위논문, 경상대학교, 2002
|
10 |
Park, S. C., Chung, Y. C. and Choi, B. K., 'Contourparallel Offset Machining without Tool-retractions', Computer Aided Design, Vol. 35, No.9, pp. 841-849, August 2003
DOI
ScienceOn
|
11 |
박상철, 정연찬, '포켓가공을 위한 오프셋 공구경로 연결 알고리즘', 한국 CAD/CAM학회 논문집, 제 6권, 제3호, pp. 169-173, 2001
|
12 |
Tawfik, T. and Ahmed, E., 'A Sweep-line Algorithm and Its Application to Spiral Pocketing', International Journal of CAD/CAM, Vol. 2, No.3, pp. 32-40,2002
|
13 |
Choi, B. K. and Kim, B. H., 'Die-Cavity Pocketing via Cutting Simulation', Computer Aided Design, Vol. 29, No. 12, pp. 837-846, 1997
DOI
ScienceOn
|
14 |
Bentley, J. L. and Ottmann, T. A., 'Algorithms for Reporting and Counting Geometric Intersections', IEEE Transactions on Computers, 28, pp. 643-647, 1979
DOI
ScienceOn
|
15 |
Yang, S. N. and Huang, M. L., 'A New Offsetting Algorithm Based on Tracing Technique', '93 ACM Solid Modeling Symposium, Montreal, Canada, pp. 201-210, 1993
|
16 |
Held, M., Lukacs, G and Andor, L., 'Pocket Machining based on Contour-parallel Tool Paths Generated by Means of Proximity Maps', Computer Aided Design, Vol. 26, No.3, pp. 189-203, March 1994
DOI
ScienceOn
|
17 |
박상철, 신하용, 최병규, '점열곡선의 꼬임을 효율적으로 찾는 알고리즘', 한국 CAD/CAM학회논문집, 제4권, 제3호, pp. 190-199, 1999
|
18 |
M. de Berg, M. van Kreveld, M. Overmars and O. Schwarzkopf, 'Computational Geometry Algorithms and Applications', Springer Verlag, March 1997
|
19 |
김덕수, 'Polygon Offsetting for Pocket Machining of CAM Software', '94대한산업공학회논문집, 1994
|
20 |
Choi, B. K. and Park, S. C., 'A Pair-wise Offset Algorithm for 2D Point-sequence Curve', Computer Aided Design, Vol. 31, No. 12, pp. 735-745, October 1999
DOI
ScienceOn
|
21 |
Persson, H., 'NC Machining of Arbitrarily Shaped Pockets', Computer Aided Design, Vol. 10, No.3, pp. 169-174, May 1997
DOI
ScienceOn
|
22 |
Tiller, W. and Hanson, E. G., 'Offsets of Two dimensional Profiles', IEEE Computer Graphics and Applications, CGA(4), No.9, pp. 36-46, September 1984
|
23 |
정재훈, '복합곡면의 설계 및 가공경로 생성에 관한 연구', 석사학위논문, 포항공대, 1994
|
24 |
Kim, D.-S., 'Polygon Offsetting Using a Voronoi Diagram and Two Stacks', Computer Aided Design, Vol. 30, No. 14, pp. 1069-1076, December 1998
DOI
ScienceOn
|