• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.76-83
• /
• 2000

The continuous time signal system by development of CMOS technology have been receiving consideration attention. In this paper, Low pass filter using new CMOS floating resistor have been designed with cut off frequency for speech signal Processing. Especially a new floating resistor consisting entirely of CMOS devices in saturation has been developed. Linearity within $\pm$0.04% is achieved through nonlinearity via current mirrors over an applied range of $\pm$1V The frequency response exceeds 10MHz, and the resistors are expected to be useful in implementing integrated circuit active RC filters. The low pass filter designed using this method has simpler structure than switched capacitofilter. So reduce the chip area. The characteristics of the designed low pass filter using this method are simulated by pspice program.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.119-124
• /
• 1986

This paper describes the development of the KORNET that may be regarded as the latest public packet-swiched computer communication network. The KORNET project included the development of the network management center (NMC), a network concentrator. For the KORNET we use the virtual circuit(VC) method, a distributed adaptive routing algorithm, and a dynamic buffer management algorithm. The NMC acts as a nerve center of the network, performing such function as network monitoring, subscriber and network management and routing management, etc. As for the NNP and NC hardware, we have implemented them with the 16-bit multitask/multiprocessor technology using MC68000 microprocessors. Softwares have been developed using C language is required for real time processing. All the network protocols we have developed comply completely with the latest CCITT recommendations including X.25, X,3 , X.28 and X.29.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.70-77
• /
• 2013

We suggest a low area and high efficiency switched-mode power supply (SMPS) with a pulse width modulation (PWM) generator based on a pseudo relaxation-oscillating technique. In the proposed circuit, the PWM duty ratio is determined by the voltage slope control of an internal capacitor according to amount of charging current in a PWM generator. Compared to conventional SMPSs, the proposed control method consists of a simple structure without the filter circuits needed for an analog-controlled SMPS or the digital compensator used by a digitally-controlled SMPS. The proposed circuit is able to operate at switching frequency of 1MHz~10MHz, as this frequency can be controlled from the selection of one of the internal capacitors in a PWM generator. The maximum current of the core circuit is 2.7 mA, and the total current of the entire circuit including output buffer driver is 15 mA at 10 MHz switching frequency. The proposed SMPS has a simulated maximum ripple voltage of 7mV. In this paper, to verify the operation of the proposed circuit, we performed simulation using Dongbu Hitek BCD $0.35{\mu}m$ technology and measured the proposed circuit.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.99-103
• /
• 2009

Recently, as wired and wireless communication services have rapidly developed and multimodal mobile devices which have various characteristics have widely spread, the need for new convergence services increases. The growing population of VoIP technologies and the high communication expense yield that the market of IP based telephony such as WiFi phone and IP phone is substituted for one of the conventional PSTN telephony. With the help of this trend, the wireline network operators desire to find a market in mobile networks. Therefore, they focus on Fixed Mobile Convergence (FMC) service as one of the key factors to accomplish this goal. FMC services are able to provide the mobility of voice services between circuit switched and packet switched networks. IP Multimedia Subsystem (IMS) based Voice Call Continuity (VCC) is one of the schemes to embody FMC services. As Application Server (AS) which has this VCC function provides seamless handover of services between heterogeneous networks, FMC subscribers can communicate seamlessly with others m WiFi domain and COMA domain using WiFi-COMA dual phone. Most of enterprises have already introduced IP network infrastructure and IP-PBX (Private Branch eXchange) for telephony. However, the problems of high communication cost and work inefficiency due to frequent outside jobs or business trips have remained. In order to solve these problems, demands for enterprise FMC services increase. In this paper, we introduce a new IP-PBX based VCC model that can provide seamless handover of voice services between WiFi and COMA networks for enterprise users and we investigate some interworking and security issues between Soft Switch (SSW) and IMS, or between IMSs. In addition, we introduce a new service that can provide the continuity of voice sessions as well as video sessions using Multimedia Session Continuity (MMSC) technology which has evolved from VCC. This service is expected to be one of the next-generation personalized services based on user's context.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.333-340
• /
• 2001

This paper presents a calculating method for inductance of the Switched Reluctance Motor(SRM) for torque characteristics and driving by analytical model. The torque generating characteristics of the SRM depend on the phase current and the inductance variation features, but Its nonlinear magnetic characteristics make it difficult to calculating inductance. Recently, The approaches for calculating inductance have taken vary from detailed finite element method(FEM) and Fitting method in magnetization curves using complex nonlinear magnetic circuit models. But those methods have not satisfactory approach for machine performance calculations, because of having a long time and remodeling for analyses, therefore thus an alternative approach is required. So it is suggested simply calculating method of the inductance based on designed data of machinery by analytical model in unaligned and aligned rotor. In order to prove the calculating, there are compare with analytical FEM. direct measurement, this method, and simulation. The compared result is shown to obtain good accuracy.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.1
• /
• pp.10-15
• /
• 2003

This paper presents the digital computer performance evaluations of the three-phase self-excited induction generator (SEIG) driven by the variable speed prime mover such as the wind turbine using the nodal admittance approach steady-state frequency domain analysis with the experimental results. The three-phase SEIG setup is implemented for small-scale rural renewable energy utilizations. The experimental performance results give a good agreement with those ones obtained from the digital computer simulation. Furthermore, a feedback closed-loop voltage regulation of the three-phase SEIG as a power conditioner which is driven by a variable speed prime mover employing the static VAR compensator (SVC) circuit composed of the thyristor phase controlled reactor (TCR) and the thyristor switched capacitor(TSC) is designed and considered herein for the wind-turbine driven the power conditioner. To validate the effectiveness of the SVC-based voltage regulator of the terminal voltage of the three-phase SEIG, an inductive load parameter disturbances in stand-alone are applied and characterized in this paper. In the stand-alone power utilization system, the terminal voltage response and thyristor triggering angle response of the TCR are plotted graphically. The simulation and the experimental results prove the effectiveness and validity of the proposed SVC which is controlled by the Pl controller in terms of fast response and high performances of the three-phase SEIG driven directly by the rural renewable energy utilization like a variable-speed prime mover.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.232-235
• /
• 2010

A 60GHz active phase shifter with 65nm CMOS is presented by replacing passive switches in switched-line type phase shifter with active ones. Active-switch phase shifter is composed of active-switch blocks and passive delay network blocks. The active-switch phase shifter design is compact compare with the conventional vector-sum phase shifter. Active-switch blocks are designed to accomplish required input and output impedances whose requirements are different whether the switch is on or off. And passive delay network blocks are composed of lumped L,C instead of normal microstrip line to reduce the size of the circuit. An 1-bit phase shifter is fabricated by TSMC 65nm CMOS technology and measurement results present -4dB average insertion loss and 120 degree phase shift at 65GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1111-1116
• /
• 2011

In this paper, a 60 GHz bidirectional active phase shifter with 130 nm CMOS is presented by replacing CMOS passive switchs in switched-line type phase shifter with Common Gate Amplifier(bidirectional amplifier). Bidirectional active phase shifter is composed of bidirectional amplifier blocks and passive delay line network blocks. The suitable topology of bidirectional amplifier block is CGA(Common Gate Amplifier) topology and matching circuits of input and output are symmetrical due to design same characteristic of it's forward and reverse way. The direction(forward and reverse way) and amplitude of amplification can be controlled by only one bias voltage($V_{DS}$) using combination bias circuit. And passive delay line network blocks are composed of microstrip line. An 1-bit phase shifter is fabricated by Dongbu HiTek 1P8M 130-nm CMOS technology and simulation results present -3 dB average insertion loss and respectively 90 degree and 180 degree phase shift at 60 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1037-1053
• /
• 1991

Flooding is known to be an effective routing mechanism not only in circuit switched networks but also packet switched networks since it minimizes the time required for up calls and does not have to maintain routing tables or distance tables by periodically intercommunicating among all the network nodes. However, one main drawback of it is the overhead on the control message signaling channels, In the paper, we propose an overlaying scheme on the existing mechanism that retains the desired properties of flooding, yet provides congestion control to the network. This is done by utilizing the wasted search messages to inform the network of the conditions of each path from one node to another. The overhead is to maintain a path table in each node. However, this overhead is not so critical. Also, this scheme can take advantages further by limiting the extent of message propagation through the network and by incorporating trunk reservation schemes additionally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.458-467
• /
• 2009

Long Tenn Evolution (LTE) is the next generation mobile phone technology which has being standardized by the Third Generation Partnership Project (3GPP). In the existing mobile communication networks, voice traffic is delivered through circuit switched networks. In LTE, however, all kinds of traffic are transferred through IP based packet switched networks which has best-effort characteristic. Therefore, providing QoS in LTE system is difficult. In order to provide QoS in LTE, RRM is very important. Especially, in part of RRM, call admission control (CAC) performs an important function to reduce network congestion and guarantee a certain level of QoS for on-going calls. In this paper, we propose a CAC algorithm in order to provide QoS for various kinds of services in LTE system. The performance of the proposed algorithm is evaluated with various simulation environments. The results show that the proposed algorithm provides QoS through rejections of requested calls. Especially, the proposed CAC algorithm can be satisfied with packet delay requirement defined in LTE specification.