• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.219-223
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental encoder is used to detect a rotor position. But, it is not desirable to use a high price encoder and microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, only using the reflective type two photo-sensors replaces the conventional opto-interrupter and slotted-disk, which not only remove a slotted-disk section but drive three-phase 6/4 pole SRM bidirectionally, Therefore, control circuit can compose common analog device with low price.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.46-49
• /
• 2004

Switched Reluctance Motor(SRM) has been researched for its superior characteristics. The SRM drive system has simple mechanical and magnetic structure, and it requires simple power electronic drive circuit. It is to be compatible to wide range adjustable speed drive system because it has the same driving characteristics of DC series motor's, easy control principle and high efficiency characteristics. In this paper, 2 types of excitation strategy are researched. Conventional 1-phase excitation and 2-phase excitation method are compared and tested. Though 1-phase excitation method is robust and has high performance, 2-phase excitation method has some merit in appling power device. Some simulation and test results are foaled with some analysis.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.308-311
• /
• 2004

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.940-943
• /
• 2004

This Paper analysis variable characteristics of inductance profiles and basic magnetic fields for Switched Reluctance Motors(SRM). The varying Inductance and flux linkage on operating control condition are very important for developing control algorithm and SRM accurate drive system. Therefore, we have analytical model for varying inductance and flux linkage with simulation and experimental method, and to find an analytical expression for the SRM coenergy. There are shown some good results that comparison of simulated and analytical inductance, flux linkage and current waves.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.924-927
• /
• 1987

This paper describes the design of ISDN D channel Layer 3 protocol for the supplementary service after the Basic Service was implemented. It provides overview interaction diagram for user side and network side of the interface for a circuit-switched call as a design model and explains processes and signals.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.285-288
• /
• 2009

The emergency recovery scheme in time of a disaster or accident up to now has been focused on how to build a backup for the public service or communication network in national scale, also, all the mobile operators have done as recovery scheme for the equipment failure in their network was to make a backup copy of billing data or package data, and they have usually studied only on the backup and failure recovery scheme in the circuit-switched network. However, since it has become more probable recently that a disaster or accident could occur in the switching office buildings, a recovery scheme in time of the failure of these entire switching offices became necessary. The purpose of this paper is to propose various recovery schemes, and by having checkups on many issues that could arise while carrying out these schemes, it presents the best solution for each issue. Moreover, it presents the future tasks that need to be studied as well as initial study directions.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.351-357
• /
• 2007

SRM (Switched Reluctance Motor) has not been put into practical use since it has been developed in mid 19th centuries, but the switching element using semi-conductor was developed in 1950's which made possible to produce small size staffing motors. The research activities have been lively conducted regarding SRM since 1960's, nowadays, more research activities are being carried out focusing on developing small home appliances such as vacuum cleaners and washing machines. This thesis explains the study of controller design applied to SRM concept. This controller executes controller algorithms via $\mu$ - processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.48-55
• /
• 2003

The design and analysis of a three-phase 6/8 structure SRM(switched reluctance motor) art described. The range of the stator ole arc and the rotor pole arc of the motor we analyzed in the linear region. The optimum range of the stator pole arc and the turn-off angle of the main switches in the power converter are given with the 2-D finite element electro-magnetic field calculation of the motor and the nonlinear simulation. Test results of the prototype are discussed. This type is good for high efficiency drive because the drive circuit is simple and current density and copper loss of the winding are law.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.215-217
• /
• 2006

This paper presents an area efficient 8-bit current digital to analog convector (DAC) which is applied to 240 channels Active Matrix - Organic Light Emitting Diode (AMOLED) data driver. The proposed circuit constitutes 4-bit binary weighted current DAC and 4-bit switched capacitor cyclic DAC. The proposed DAC has about 70% smaller area than that of the typical binary weighted current DAC. We overcome sampling time by reducing the number of repetition phases so that it can display 8-bit gray scale image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3246-3255
• /
• 1996

A threshold voltage extraction scheme which does not need matched replica of the MOSFET under test is proposed. In contrast to alternative methods, the accuracy of the proposed scheme does not depend on the matching of the test transistors. The proposed scheme has been implemented in a matching-free way using a switched-capacitor subtracting ampliier and a dynmic current mirror. Nonideal effects associated with these circuits, such as non-zero offset voltages and finite gains of op-amps, capcitor mismateches, and charge injection of MOS switches, are investigated and compensated. The circuit has been designed using ISRC 1.5.mu.m CMOS process parameters andfabricated at Inter-University semiconductor Research Center, and its performance has been evaluated.