• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.23-32
• /
• 2006

다층 고속 디지털 보드에 대한 빠르고 정확한 전압 버스 설계 방법은 정확하고 정밀한 고속 보드에 전원 공급망 설계 방법을 위해 고안되었다. FAPUD는 PBEC(Path Based Equivalent Circuit)모델과 망 합성 방법의 두 중요 알고리즘을 기반으로 구성된다. PBEC 모델 기반의 회로 레벨의 2차원 전원 분배 망의 전기적 값으로부터 lumped 1차원 회로 모델로 간단한 산술 표현들을 활용한다 제안된 PBEC 기반인 회로 단계 설계는 제안한 지역 접근법을 이용해 수행된다. 이 회로 단계 설계는 온칩 디커플링 커패시터의 크기, 오프칩 디커플링 커패시터의 위치와 크기, 패키지 전압 버스의 유효한 인덕턴스를 직접 결정하고 계산한다. 설계 출력에 따라 모든 디커플링 커패시터가 포한된 lumped 회로 모델과 전압 버스의 레이아웃은 FAPUD 방법을 이용한 후 얻을 수 있다. 미세조정 과정에서, I/O Switching에 의해 덧붙여진 Simultaneous Switching Noise(SSN)를 고려한 보드 재 최적화가 수행될 수 있다 이는 전원 공급 잡음에 I/O 동작 효과가 lumped 회로 모델을 가지고 전 동작 주파수 범위에 대해 추산될 수 있기 때문이다. 게다가 만약 설계에 조정이 필요하거나 교체해야 한다면, FAPUD 방법은 다른 전면 설계변경 없이 디커플링 커패시터들을 대체하여 설계를 수정하는 것이 가능하다. 마지막으로 FAPUD 방법은 전형적인 PEEC 기본설계 방법과 비교해 정확하고 FAPUD 방법의 설계 시간은 전형적인 PEEC 기본 설계 방법의 시간보다 10배가 빠르다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권9호
• /
• pp.1368-1372
• /
• 2014

Several studies arduously reported that gayal (Bos frontalis) is an independent bovine species. The population size is shrinking across its distribution. In Bangladesh, it is the only wild relative of domestic cattle and also a less cared animal. Their body size is much bigger than Bangladeshi native cattle and has prominent beef type characters along with the ability to adjust in any adverse environmental conditions. Human interactions and manipulation of biodiversity is affecting the habitats of gayals in recent decades. Besides, the only artificial reproduction center for gayals, Bangladesh Livestock Research Institute (BLRI), has few animals and could not carry out its long term conservation scheme due to a lack of an objective based scientific mission as well as financial support. This indicates that the current population is much more susceptible to stochastic events which might be natural catastrophes, environmental changes or mutations. Further reduction of the population size will sharply reduce genetic diversity. In our recent investigation with 80K indicine single nucleotide polymorphism chip, the $F_{IS}$ (within-population inbreeding) value was reported as $0.061{\pm}0.229$ and the observed ($0.153{\pm}0.139$) and expected ($0.148{\pm}0.143$) heterozygosities indicated a highly inbred and less diverse gayal population in Bangladesh. Prompt action is needed to tape the genetic information of this semi-domesticated bovine species with considerable sample size and try to investigate its potentials together with native zebu cattle for understanding the large phenotypic variations, improvement and conservation of this valuable creature.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.59-64
• /
• 2019

This study investigates the optical characteristics of InGaN multiple quantum wells(MQWs) light emitting diodes(LEDs) on planar sapphire substrates(PSSs), nano-sized PSS(NPSS) and micro-sized PSS(MPSS). We obtain the results as the patterning size of the sapphire substrates approach the nanometer scale: The light from the back side of the device increases and the total light extraction becomes larger than the MPSS- and planar-LEDs. The experiment is conducted by Monte Carlo ray-tracing, which is regarded as one of the most suitable ways to simulate light propagation in LEDs. The results show fine consistency between simulation and measurement of the samples with different sized patterned substrates. Notably, light from the back side becomes larger in the NPSS LEDs. We strongly propose that the increase in the light intensity of NPSS LEDs is due to an abnormal optical distribution, which indicates an increase of extraction probability through NPSS.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권5호
• /
• pp.628-635
• /
• 2018

Objective: To determine the effects of genomic breeding values (GBV) and single nucleotide polymorphisms (SNP) on the total number of piglets born (TNB) in 3 pig breeds (Berkshire, Landrace, and Yorkshire). Methods: After collecting genomic information (Porcine SNP BeadChip) and phenotypic TNB records for each breed, the effects of GBV and SNP were estimated by using single step best linear unbiased prediction (ssBLUP) method. Results: The heritability estimates for TNB in Berkshire, Landrace, and Yorkshire breeds were 0.078, 0.107, and 0.121, respectively. The breeding value estimates for TNB in Berkshire, Landrace, and Yorkshire breeds were in the range of -1.34 to 1.47 heads, -1.79 to 1.87 heads, and -2.60 to 2.94 heads, respectively. Of sows having records for TNB, the reliability of breeding value for individuals with SNP information was higher than that for individuals without SNP information. Distributions of the SNP effects on TNB did not follow gamma distribution. Most SNP effects were near zero. Only a few SNPs had large effects. The numbers of SNPs with absolute value of more than 4 standard deviations in Berkshire, Landrace, and Yorkshire breeds were 11, 8, and 19, respectively. There was no SNP with absolute value of more than 5 standard deviations in Berkshire or Landrace. However, in Yorkshire, four SNPs (ASGA 0089457, ASGA0103374, ALGA0111816, and ALGA0098882) had absolute values of more than 5 standard deviations. Conclusion: There was no common SNP with large effect among breeds. This might be due to the large genetic composition differences and the small size of reference population. For the precise evaluation of genetic performance of individuals using a genomic selection method, it may be necessary to establish the appropriate size of reference population.

• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1968-1976
• /
• 2006

Recombinant E. coli ACV 1003 (recA:: lacZ) was used to measure low concentrations of DNA-damaging chemicals, which produce $\beta$-galactosidase via an SOS regulon system. Very low $\beta$-galactosidase activities of less than 0.01 unit/ml, $\beta$-galactosidase produced through an SOS response corresponding to the 10 ng/ml (ppb) of DNA damaging chemicals in the environment, can be rapidly determined by using an alternative interferometric biosensor with optically flat thin films of porous silicon rather than by the conventional time-consuming Miller's enzyme assay as well as the ELISA method. fu order to enhance the sensitivity in the interferometry, it needs to obtain more uniform distribution and higher biolinking efficiency, whereas interferometric sensing is rapid, cheap, and advantageous in high throughput by using a multiple-well-type chip. In this study, pore size adjusted to 60 nm for the target enzyme $\beta$-galactosidase to be bound on both walls of a Si pore and a calyx crown derivative was apllied as a more efficient biolinker. Furthermore, anti-$\beta$-galactosidase was previously functionalized with the biolinker for the target $\beta$-galactosidase to be specifically bound. When anti-$\beta$-galactosidase was bound to the calyx-crown derivative-linked surface, the effective optical thickness was found to be three times as high as that obtained without using anti-$\beta$-galactosidase. The resolution obtained was very similar to that afforded by the time-consuming ELISA method; however, the reproducibility was still unsatisfactory, below 1 unit $\beta$-galactosidase/ml, owing to the microscopic non-uniform distribution of the pores in the etched silicon surface.

• 한국재료학회지
• /
• 제6권7호
• /
• pp.700-708
• /
• 1996

Flip chip bonding에 무전해도금기술을 적용하여 solder bumper형성의 최적 조건을 규명하였다. 시편은 AI 패턴된 4 inch Si 웨이퍼를 사용하고, 활성화 처리시 zincate 용액을 사용하였으며, 무전해 도금은 Ni-P 도금액고 Au immersion 용액을 사용하였다. 활성화 물질의 AI 침식정도 및 Zn 석출 정도를 알아보기 위하여 EDS측정을 하였고, 각 공전에서의 표면형상을 알아보기 위해 SEM 분석을 하였다. 열처리 후 금도금층의 주 결정성장 방향은 XRD를 이용하여 측정하였다. 산처리에서 질산과 황산 중 질산에 의한 산화막제거 정도가 더 우수하게 나타났다. 활성화 처리시 zincate 용액을 희석시킬수록 입자 크기가 미세해 지고, 활성화 물질은 pH 13-13.5, 상온, 농도 15-25%의조건에서 크기가 작은 Zn 활성화 물질이 균일하게 분포하였다. Ni과 Auan전해도금 속도는 온도와 pH가 증가할수록 증가하였다. Ni 무전해 도금 조건은 pH 4.5, 온도 $90^{\circ}C$, 시간 20분이며, Au 무전해 도금조건은 pH7, 온도 $80^{\circ}C$, 시간 10분이었다. 상온에서 $400^{\circ}C$까지 30분동안 열처리 한 후 금도금막의 결정 방향은 pH 7, 온도 $80^{\circ}C$, 시간 10분이었다. 상온에서 $400^{\circ}C$까지 30분 동안 열처리 한 후 금도금막의 결정 방향은 pH 7에서 (111), pH 9에서는 (200)과 (111)이 주 peak로 나타났으며, 열처리에 의한 결정 방향의 변화는 없었다. 전체 공정에서 최종적인 표면 형상에 영향을 주는 단계는 활성화 처리로서 flip chip의 bonding layer형성에 가장 중요한 요소임을 알 수 있었다.보다 자생지(自生地)에서 높은 함량(含量)을 보였다. 5. 무기성분함양(無機成分含量)의 차이(差異)는 K의 경우(境遇) 자생지(自生地)에서 보다 재배지(栽培地)에서 평균적(平均的)으로 10배이상(倍以上) 정도(程度) 높은 함량(含量)의 차이(差異)를 보였으나 Mn, Zn, Na, Cu 등(等)은 일정(一定)한 경향(傾向)을 보이지 않는 것으로 나타났다. 6. 유리(遊離) 아미노산(酸)의 함량(含量)은 자생지(自生地은)보다 재배지(栽培地)에서 전반적(全般的)으로 높은 함량(含量)을 나타내었고, 특(特)히 Arginine은 다른 성분(成分)들과 비교(比較)해 볼 때 가장 높은 조성(組成)의 차이(差異)를 나타내었다. 7. 야생(野生)더덕과 재배(栽培)더덕의 정유성분수율(精油成分收率)은 자생지재배(自生地栽培)에서는 모두 0.004% 였고 재배지(栽培地)에서는 야생(野生)더덕이 0.005%였다. 8. 더덕의 재배장소(栽培場所)에 따른 향기성분(香氣成分)은 총(總) 21종(種)이었으며 自生地(自生地)에서 야생(野生)더덕은 16종(種), 재배(栽培)더덕은 18종(種)이었고, 재배지(栽培地)에서 야생(野生) 더덕은 14종(種), 재배(栽培)더덕은 20(種)이었다. 9. Trans-2-hexanol은 야생(野生)더덕의 자생지(自生地) 재배(栽培)에서 피이크 면적(面積) 당(當) 50.3%, 재배지(栽培地)에서 피이크 면적(面積) 당(當) 43.3%를 보였으며 amylalcohol, furfuryl acetate, 2-methoxy-4-vinyl phenol(MVP)는 재배(栽培)더덕에서만 확인(確認)되었다.는 KI, BMI와 유의적인 양의 상관관계를 보였고 (p<0.01), HCL-C은 비체중, BMI, LBM, TBM와 유의적인 음의 상관관계를 보였으며, (p<0.01), KI, SBP와도 음의 상관관계를 보였다. (p<0.05), LCL-C는 KI와 유의적이인 양의

• Genomics & Informatics
• /
• 제6권4호
• /
• pp.231-234
• /
• 2008

Precise and reliable identification of CNV is still important to fully understand the effect of CNV on genetic diversity and background of complex diseases. SNP marker has been used frequently to detect CNVs, but the analysis of SNP chip data for identifying CNV has not been well established. We compared various normalization methods for CNV analysis and suggest optimal normalization procedure for reliable CNV call. Four normal Koreans and NA10851 HapMap male samples were genotyped using Affymetrix Genome-Wide Human SNP array 5.0. We evaluated the effect of median and quantile normalization to find the optimal normalization for CNV detection based on SNP array data. We also explored the effect of Robust Multichip Average (RMA) background correction for each normalization process. In total, the following 4 combinations of normalization were tried: 1) Median normalization without RMA background correction, 2) Quantile normalization without RMA background correction, 3) Median normalization with RMA background correction, and 4) Quantile normalization with RMA background correction. CNV was called using SW-ARRAY algorithm. We applied 4 different combinations of normalization and compared the effect using intensity ratio profile, box plot, and MA plot. When we applied median and quantile normalizations without RMA background correction, both methods showed similar normalization effect and the final CNV calls were also similar in terms of number and size. In both median and quantile normalizations, RMA backgroundcorrection resulted in widening the range of intensity ratio distribution, which may suggest that RMA background correction may help to detect more CNVs compared to no correction.