• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.47-52
• /
• 2004

In this paper we fabricated microchip antenna operating in bluetooth frequency bands(2.402∼2.4800㎓). The antenna has a size of about 54mm${\times}$19mm${\times}$0.8mm giving a total bluetooth PCB for suuort and chip of about 11mm${\times}$4mm${\times}$1.6mm. Bandwidth of the designed and fabricated chip antenna for bruetooth is 10.71% at the resonated frequency of 2.45㎓ and the resonant frequency and bandwidth versus change of my arbitrary fled point is observed. also, E-plane and H-plane in the Measured radiation pattern characteristic of chip antenna is compared and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1264-1271
• /
• 2009

In this paper, the chip slot antenna which is used for mobile devices and designed for multi-band is proposed. The proposed antenna is comprised of a chip antenna(10 mm$\times$20 mm$\times$1.27 mm) and a system circuit board(30 mm$\times$60 mm$\times$0.8 mm). The chip slot antenna is mounted on the system circuit board and the end of F-type strip line which is patterned on the chip antenna is connected by a via with a ground plane of the system circuit board. So, a chip antenna radiates effectively the energy by transition between a microstrip line of the system circuit board and a open slot structure of the chip antenna. In the results of proposed antenna, impedance bandwidth of 3:1 VSWR(-6 dB return loss) is 1.98 GHz(1.61~3.59 GHz) and 0.8 GHz(5.2~6 GHz). So, it can cover multi-band of DCS, PCS, UMTS, WLAN. The proposed antenna can be applied to mobile devices.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.506-510
• /
• 2003

In this paper, a meander-line chip antenna with stacked layer is suggested, designed and fabricated employing the LTCC(Low Temperature Co-fired Ceramic) fabrication techniques. To reduce the antenna chip size, the meander-line antenna strip is distributed over three layer. Layers one interconnected using via holes. A 2.4 GHz chip antenna with size of $3.75{\times}7.9{\times}1.0 mm^3$ is designed and fabricated using the LTCC technique. Measurements of the fabricated antenna show 160 MHz bandwidth and 3.75 dBi maximum gain. The Measured reflection coefficient and radiation patterns agree well with the prediction by electromagnetic simulation.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.263-266
• /
• 2005

An UHF ($860{\sim}960MHz$) RFID tag antenna is optimized and designed using a genetic algorithm (GA). The tag antenna impedance should be matched to the conjugate of the impedance of the tag IC Chip. The chip impedance has real and capacitive imaginary parts due to the parasitic capacitance of the RFID chip. A GA linked with a commercially available antenna simulation program optimizes the UHF $860{\sim}960\;MHz$ tag antenna to match a commercially available RFID chip. This method shows that any RFID antenna can be designed for any commercial RFID chip with any impedance.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.532-535
• /
• 2003

In this paper, we made study for plastic chip antenna, the plastic is Formax with the circle of PVC and its electric characteristics are dielectric constant 1.9, surface current $10{\Omega}$. The proposed antenna same as the conventional antenna are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage are attractive for application in mobile antenna. We study the dual-band plastic chip antenna resonated at 800Mhz and 1800Mhz. From this study results, we feel confident of application for mobile phone antenna.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.130-135
• /
• 2005

In this papers, we made study for plastic chip antenna, the plastic is Foamex with the circle of PVC and its electric characteristics are dielectric constant 1.9, insulation intensity 112 KV/cm. The proposed antenna is same as the conventional antennas are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage is attractive for application in mobile antenna. In order to valid the proposed papers, it is implemented the antennas of four types and experimented. From the results, we conformed that the antennas are operated at the dual band which is cellular band and Korea-PCS band. And the gain of the antennas has about above -2 dB and the pattern is same as conventional antennas. From this papers, the realized antennas using Foamex material will be application for mobile phone antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1115-1122
• /
• 2003

In this paper we fabricated microchip antenna operating in bluetooth frequency bands(2.402∼2.480GHz). The antenna has a size of about 54mm${\times}419mm${\times}40.8mm, giving a total bluetooth PCB for support and chip of about 11mm${\times}44mm${\times}41.6mm. Bandwidth of the designed and fabricated chip antenna for bruetooth is 10.71 % at the resonated frequency of 2.45GHz and the resonant frequency and bandwidth versus change of any arbitrary feed point is observed. also, E-plane and H-plane in the Measured radiation pattern characteristic of chip antenna is compared and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.633-640
• /
• 2002

In this paper, the small chip meander antenna for dual-frequency operation is presented. The proposed chip meander antennas was fabricated by the ceramic chip using LTCC-MLC process. It is a novel compact dual-frequency design using a meandered patch that achieves more degrees of freedom for adjusting dual-frequency operation and the size reduction with narrow frequency ratio. And it is proposed that the 3D structure for additional size reduction of the meander antenna. The size reduction of the 3D meander antenna is as large as 50 % as compared to the design for dual-frequency operation not using 3D structure. It is observed that the principle of dual-frequency operation through current distribution, return loss and radiation pattern.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.405-409
• /
• 2012

In this paper, on-chip antennas applicable to ultra low power wireless transceiver are designed and evaluated. Using $0.18{\mu}m$ SiGe MMIC process, 4 types of antenna with $1{\times}1mm^2$ dimensions are fabricated. The on-wafer measurement in a microwave probe station is conducted to measure the input VSWR and antenna performance of the designed on-chip antenna. Performance evaluation results show that developed antennas can be easily integrated into one-chip RF transceiver for ubiquitous applications, including WPAN and human body communications.

• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.43-45
• /
• 2014

We propose a printed circuit board (PCB)-embedded antenna for millimeter-wave chip-to-chip communication. The antenna is 0.18 mm in height which is 1/20 wavelength at 80 GHz. In order to realize such a low profile, a zeroth-order resonator antenna with a periodic array of four unit cells is employed, and its geometry is optimized to cover an 8-GHz bandwidth from 76 to 84 GHz. With this;the antenna is capable of radiating in a direction parallel to the board length despite the short distance between the ground and the radiator. Simulation and measurement results show that the optimized design has low reflection coefficients and consistent radiation patterns throughout the target bandwidth.