• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.321-324
• /
• 1996

Sr1+xSm1-xFeO4-y solid solutions with a composition range 0.00 ≤x≤1.00 have been prepared at 1200 ℃ in air under normal atmospheric pressure. All the solutions exhibit the K2NiF4-type structure of tetragonal system. Mohr salt analysis shows that the mole ratio of Fe4+ ion to Fe3+ ion or the τ value increases with the x value. Nonstoichiometric chemical formulas have been formulated from the x, τ, and y values. Electrical conductivity was measured in the temperature range of 173-373 K under atmospheric air pressure. The conductivities of each sample are varied within the semiconductivity range. The conductivity at constant temperature increases steadily with x value and activation energies are varied from 0.14 to 0.32 eV. The conduction mechanism of the ferrite system may be proposed as a hopping model of conduction electrons between the mixed valence states. The Mossbauer spectrum for the composition of x=0.00 shows a six line pattern by which the existence of Fe3+(I.S.=0.32 mm/sec) can only be identified. The spectra for the compositions of x=0.50 and 1.00 presents broad single line patterns showing a mixed valence state.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.188-203
• /
• 2021

The specific benefits of the modified films formed on preliminary anodized aluminum, including the versatility of their potential applications impose the need for evaluation of the exploitation reliability of these films. In this aspect, the durability of Cu and Ni modified anodized aluminum oxide (AAO) films on the low-doped AA1050 alloy was assessed through extended exposure to a 3.5% NaCl model corrosive medium. The electrochemical measurements by means of electrochemical impedance spectroscopy (EIS) and potentiodynamic scanning (PDS) after 24 and 720 hours of exposure have revealed that the obtained films do not change their obvious barrier properties. In addition, supplemental analyses of the coatings were performed, in order to elucidate the impact of the AC-deposition of Cu and Ni inside the pores. The scanning electron microscopy (SEM) images have shown that the surface topology is not affected and resembles the typical surface of an etched metal. The subsequent energy dispersive X-ray spectroscopy (EDX) tests have revealed a predominance of Cu in the combined AAO-Cu/Ni layers, whereas additional X-ray photoelectron (XPS) analyses showed that both metals form oxides with different oxidation states due to alterations in the deposition conditions, promoted by the application of AC-polarization of the samples.

• 한국방재안전학회논문집
• /
• 제5권1호
• /
• pp.37-42
• /
• 2012

태풍, 화학사고 등 재난발생시 신속한 대응으로 피해를 최소화하기 위해서는 지역 차원에서 재난대응에 대한 준비가 되어있어야 한다. 본 논문에서는 우리나라 지방자치단체의 재난대비 실태를 현행 법 제도와 재난관리담당 공무원의 인터뷰를 통하여 조사 분석하였다. 미국 정부의 지방자치단체 재난대비 역량 제고를 위한 정책들을 소개하였으며, 이는 우리나라 정부가 지역의 대응역량을 강화하기 위한 재난대비 정책의 개발에 유용하게 활용할 수 있을 것이다.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(환경)
• /
• pp.450-468
• /
• 1994

Scientists have long used conventional toxicological methods to establish 'safe levels of exposure' for chemicals presumed to have threshold health effects or doses below which significant effects are unlikely to occur. These same methods cannot be used to establish safe levels of exposure for non-threshold pollutants. such as carcinogens. Therefore. Federal regulatory agencies in the United States are using risk assessment methods to provide information for public health policy decisions concerning increases in risk associated with increases in exposure to carcinogenic and other non-threshold pollutants. Acceptable exposure/risk levels are decided by policymakers who consider descriptions and estimates of risks together with social and economic benefits from the uses of the chemical. 1bis paper focuses on the development of quantitative risk assessment approaches by Federal regulatory agencies in the United States, and identifies the mathematical models currently being used for risk extrapolation. including their inherent uncertainties. The uncertainties and limitations of these methods have led some scientists to question the utility of quantitative risk extrapolation. The experience of the; U.S. Environmental Protection Agency (EPA). as summarized in this paper. can provide a realistic basis for evaluating the pros and cons. Finally. shortcomings in current risk assessment methods and their use in policy decisions are explored. and areas for possible improvement. given current scientific knowledge. are identified.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.37-42
• /
• 2001

The electrooxidation of methanol was studied using Pt, PtNi(1.1 and 3:1), PtRuNi and PtRu(1:1) alloy nanoparticles in sulfuric acid solution for application to a direct methanol fuel cell. The PtNi and PtRuNi alloys showed excellent catalytic activities compared to those of pure Pt and PtRu. The role of Ni in the electrocatalytic activity was investigated using cyclic voltammetry (CV), chronoamperometry (CA), X-ray photoelectron spectroscopy (XPS). The XPS data confirm that the chemical states of Pt are exclusively metal as well as the presence of metallic Ni, NiO, $Ni(OH)_2$, NiOOH, metallic Ru, $RuO_2$, and $RuO_3$. Negative shifts of the binding energies of Pt for the PtNi alloy nanoparticles were determined by XPS measurements. This can be explained based by assuming that the enhanced activities of PtNi alloys for methanol electrooxidation were caused by the oxide states of Ni and by the change in the electronic structure of Pt component in the alloys.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.464.1-464.1
• /
• 2014

Among numerous material candidates, Cu(InxGa1-x)(SySe2-y) (CIGS) thin films have emerged as promising material candidates for thin film solar cell applications due to the high energy conversion efficiency and relatively low fabrication cost. The CIGS thin film solar cells consist of several materials, including Mo back contacts, ZnO-based window layers, and CdS buffer layers. All these materials have different crystal structures and contain quite distinct chemical elements, and hence the device characterization requires careful analyses. Most of all, identification of the major trap states resulting in the carrier recombination processes is a key step toward realization of high efficiency CIGS solar cells. We have carried out electrical investigations of CIGS thin film solar cells to specify the major trap states and their roles in photovoltaic performance. In particular, we have used the temperature-dependent transport characterizations and admittance spectroscopy. In this presentation, we will introduce some exemplary studies of DC and AC electrical characteristics of the CIGS solar cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.236-239
• /
• 2002

Surface states of silicone polymer treated by plasma were investigated by the analysis by x-ray photoelectron spectroscopy (XPS) and surface voltage decay. Plasma treatment causes the silica-like oxidative layer, which is confirmed with XPS, and lowers surface resistivity with increasing the plasma treatment time. Using the decay time constant of surface voltage, the calculated surface resistivity was compared with the value directly measured by a voltage-current method. A good agreement between two methods was obtained. In addition, we estimated the thermal activation energy for surface conduction, Based on our results, we could understand the relationship between surface chemical states and surface electrical properties.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.376-379
• /
• 2013

Multi-walled carbon nanotubes (MWCNTs) were synthesized using catalytic chemical vapor deposition (CVD) method. Oxygen plasma treatment was applied to modify surface state of the CNTs synthesized for improvement of field emission performance. Surface state of the plasma treated CNTs was studied by X-ray photoelectron spectroscopy (XPS). The surface states of the CNTs were changed as a function of plasma treatment time. The oxygen related carbon shift was moved toward higher binding energy with the plasma treatment time. This result implies that the oxygen plasma treatment changes the surface state effectively. While any shift in carbon 1s peak was not detected for the as grown CNTs, oxygen related carbon shift was detected for the plasma treated CNTs. Carbon shift implies that closed CNT tips were opened by the oxygen plasma and reacted with oxygen species. Since the field emission occurs at pentagons or dangling bonds of the CNT tips, the increase of carbon-oxygen bonds plays an important role in field emission behavior by increasing the number of electron emission sites resulting in improvement of the field emission performance.

• Nuclear Engineering and Technology
• /
• 제5권4호
• /
• pp.286-290
• /
• 1973

염화카리움 단결정중 수산화물을 제거하고 이를 극미량의 음이온 불순물을 가하여 결정내에 점결함을 형성시키는 전 처리를 하였다. 이들 시료를 빛이 차단된 상태에서 액체질소 온도에서 원자로에 조사하였고 조사된 시료를 자외선으로 쪼인다음 4가지 산화상태 즉 -2, 0, +4, +6가의 $^{35}$ 를 화학적으로 상호분리하여 방사능을 계측하였다. 음이온 불순물로 처리된 시료는 순수한 결정에 비하여 낮은 산화상태 (-2가)의 $^{35}$ S 더 많이 생성되었고, 음이온 불순물로 처리된 시료 및 순수한 결정 모두를 자외선으로 쪼였을 때 30분까지는 -2가의 $^{35}$ S가 급격히 증가함을 알았다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.36-41
• /
• 2016

The development need of new renewable energy is more and more important to resolve exhaustion of chemical fuels and environmental pollution. Polymer electrolyte membrane fuel cell has been widely studied to the extent that it can be used commercially. But there are many problems to be solved. One of them is to enhance the stability of fuel cell stacks. This paper proposes a new fault diagnosis method using Least Square Method (LSM) which is one of parameter estimation methods. The proposed method extracts equivalent circuit parameters from on-line measurements. Parameters of the circuit are estimated according to normal and abnormal states using simulation. The variation of parameters estimated in each states enables the estimation of state in fuel cells. Thus the LSM presented can be a suitable on-line parameter estimation method in PEMFC.