• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.133-137
• /
• 2014

직경 수 마이크론급의 Ag 코팅 Cu 플레이크를 제조하기 위한 선행공정으로 습식 화학적 합성법으로 제조된 서브마이크론급의 Cu 입자를 볼 밀링 공정을 통해 프레이크화 하였다. 입자들의 산화 및 응집을 막기 위해 볼 밀링 유체로는 에틸렌글리콜을 사용하였고, 에틸아세테이트 표면개질제도 첨가하였다. 용기의 회전수에 따른 실험 결과를 통해 회전수에 따른 회전 모드의 변화가 밀링 후 Cu 입자들의 평균적인 형상과 형상 균일도를 크게 변화시킴을 확인할 수 있었다. 또한 첨가한 지르코니아 볼의 직경 역시 Cu 입자들의 플레이크화 균일도를 결정하는 대표 공정변수임을 확인할 수 있었다. 그 결과 다소간의 응집체를 포함한 서브마이크론급의 Cu 입자를 사용했음에도 불구하고, 회전수, 표면개질제 첨가량, 그리고 지르코니아 볼의 직경 등의 대표 공정변수들을 최적화한 볼 밀링 공정을 통해 분산성이 우수한 수 마이크론급의 Cu 플레이크를 성공적으로 제조할 수 있었다.

• 한국키틴키토산학회지
• /
• 제23권4호
• /
• pp.256-261
• /
• 2018

Recently, the number of cardiovascular disease-related deaths worldwide has increased. Therefore, the importance of percutaneous cardiovascular intervention and drug-eluting stents (DES) has been highlighted. Despite the great clinical success of DES, the re-endothelialization at the site of stent implantation is retarded owing to the anti-proliferative effect from the coated drug, resulting in late thrombosis or very late restenosis. In order to solve this problem, studies have been actively carried out to excavate new drugs that promote rapid re-endothelialization. In this study, we introduced hydrophilic drug, tauroursodeoxycholate (TUDCA), that improves the proliferation of endothelial progenitor cells and promotes apoptosis of vascular smooth muscle cells. In addition, we utilized shellac, which is a natural resin from lac bug to coat TUDCA on the surface of the metal. When using conventional coating method including biodegradable polymers and organic solvents, phase separation between polymer and drug occurred in the coating layer that caused incomplete incorporation of drug into the polymer layer. However, when using shellac as a coating polymer, no phase separation was observed and drug was fully covered with the polymer matrix. In addition, by adjusting the composition of coating solution and modifying the hydrophilicity of the metal surface using oxygen plasma, the surface roughness decreased due to the increased affinity between coating solution and metal surface. This result provides a method of depositing a hydrophilic drug layer on the stent.

• 한국지반환경공학회 논문집
• /
• 제23권11호
• /
• pp.5-11
• /
• 2022

본 연구는 고로슬래그미분말(SG) 및 강섬유(SF)를 적용한 고유동 흙막이 벽체 재료(RWM)의 역학적 성능을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 고성능감수제, 공기연행제 및 증점안정화제를 굳지 않은 흙막이 벽체 재료에 적정량을 사용하였다. 흙막이 벽체 재료 경화체의 강도특성을 고찰하기 위하여 압축, 할열 인장 및 휨강도를 소정의 재령에서 측정하였으며, 표면전기저항, 흡수율 실험을 통하여 흙막이 벽체 재료의 역학적 성능을 평가하였다. 실험결과에 따르면 SGC 배합은 OPC 배합에 비하여 대체적으로 우수한 성능을 나타내었으며, SF는 흙박이 벽체 재료의 역학적 성능향상에 효과적인 것으로 조사되었다. 특히, SG의 사용은 흙막이 벽체 재료의 장기강도 발현 뿐만 아니라 차수성능 향상에 기여할 것으로 판단된다.

• 한국지반환경공학회 논문집
• /
• 제24권6호
• /
• pp.13-20
• /
• 2023

본 연구는 강섬유(SF) 혼입률에 따른 고유동 흙막이 벽체 재료(RWM)의 역학적 성능 및 내구성을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 적정량의 고성능감수제(SP), 공기연행제(AEA) 및 증점 안정화제(VMA)를 사용하였다. 흙막이 벽체 재료 경화체의 압축 및 쪼갬 인장강도를 소정의 재령에서 측정하였으며, 흙막이 벽체 재료의 역학적 성능은 표면전기저항성 및 흡수율 실험을 통하여 고찰하였다. 또, 염소이온 침투저항성 및 동결융해 저항성 실험을 통하여 흙막이 벽체 재료의 내구성능을 고찰하였다. 실험결과에 의하면, 강섬유를 적용한 배합이 강섬유 무혼입 배합에 비하여 우수한 성능을 나타내었으며, 2% 적용 배합이 경제성 및 성능 관점에서 상대적으로 효과적인 것으로 관찰되었다. 따라서, 적절한 SF의 적용은 흙막이 벽체 재료의 성능 향상에 기여할 것으로 판단된다.

• Journal of Microbiology
• /
• 제35권4호
• /
• pp.300-308
• /
• 1997

The catechol 2,3-dioxygenase (C23O) encoded by the Pseudomonas putida xylE gene was over-produced in Escherichia coli and purified to homogeneity. The activity of the C23O required the reduced form of the Fe(II) ion since the enzyme was highly susceptible to inactivation with hydrogen perocide but reactivated with the addition of ferrous sulfate in conjunction with ascorbic acid. The C23O activity was abolished by treatment with the chemical reagents, diethyl-pyrocarbonate (DEPC), tetranitromethane (TNM), and 1-cyclohexy1-3-(2-morpholinoethyl) car-bodiimidemetho-ρ-toluenesulfontate (CMC), which are modifying reagents of histidine, tyrosine and glutamic acid, respectively. These results suggest that histidine, tyrosine and glutamic acid residues may be good active sites for the enzyme activity. These amino acid residues are conserved residues may be good active sites for the enzyme activity. These amino acid residues are conserved residues among several extradion dioxygenases and have the chemical potential to serveas ligands for Fe(II) coordination. Analysis of random point mutants in the C23O gene derived by PCR technique revealed that the mutated positions of two mutants, T179S and S211R, were located near the conserved His165 amd Hos217 residues, respectively. This finding indicates that these two positions, along with the conserved histidine residues, are specially effective regions for the enzyme function.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.139-139
• /
• 2012

With angle resolved photoemission spectroscopy (ARPES), the surface electronic band structures of Pt3Co (111) and Pt3Ni (111) single crystals are investigated, which allow to study the bonding interaction between chemically absorbed atomic oxygen and its surfaces. The d-band electrons of subsurface TM are separated from the direct chemical bonding with atomic oxygen. That is, the TM does not contribute to direct chemical bonding with oxygen. From the density functional theory (DFT) calculations, it is identified that the main origin of improved oxygen absorption property, i.e. softening of Pt-O bonding, is due to the suppression of Pt surface-states which is generated from change of interlayer potential, i.e. charge polarization, between Pt-top and TM-subsurface. Our results point out the critical roles of subsurface TM in modifying surface electronic structures, which in turn can be utilized to tune surface chemical properties.

• Journal of Plant Biology
• /
• 제17권1호
• /
• pp.15-21
• /
• 1974

The most commonly grown economical and flue-cured tobacco cultivar Yellow Special A was used in pot-culture tests in order to study Ethrel (2-chloroethyl phosponic acid) effects on accelerating maturity of tobacco leaves in relation to the most adequate level of the chemical useful for field growing, nitrogen level in soil for the most pronounced response, and the most suitable spray period during the growth stages of pre-, post- and topping periods. The following conclusions, thus, were obtained from the present studies; 1. 500ppm Ethrel spray was reconfirmed to be adequate in the practical applications, although the extent of yellow-ripening of tobacco leaves was increased as the Ethrel level increased. The highest leevel treated resulted in causing chemically damaged lesions on leaves and early defoliation. 2. Ethrel-treated leaves showed deeper yellowish tinge to them than those without treatment, while different levels of the chemcial had less influence on the tinge. 3. An adequate level of nitrogen supply to plants favored the Ethrel response, whereas either very low or high level of nitrogen in the soil lowered the chemical effect on accelerating the yellow-ripening. When carbohydrates versus total nitrogen ratio became relatively high, the condition brought out some outstanding Ethrel effects. 4. Chlorophyll level of leaves increased as soil applications of nitrogen level increased, and that also increased carotenoid level of the tobacco leaves. Ethrel-treated leaves showed deeper orange tinge than those without treatment, while the highest level of nitrogen application showed the deepest orange tinge to tobacco leaves. 5. Pre-topping treatment (12 days before topping and flowering) resulted in almost no Ethrel response, and that treatment right on the day of topping, showed response of yellow-leaf ripening at nearly bottom-half leaves of a tobacco plant. The post-topping treatment (12 days after topping) made plants showing full response of Ethrel from bottom to the top leaves of tobacco plant in accelerating the leaf maturity. 6. The extent of Ethrel responses on accelerating yellow-ripening of tobacco leaves was discussed for the modifying influences brought about by certain environmental factors. Discussions were also made about the possible practical applications (particularly for pre-rice planting) and quality difference that may be caused by such growth environments.

• Safety and Health at Work
• /
• 제9권1호
• /
• pp.84-94
• /
• 2018

Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure is estimated for tasks by preassigned ART1.5 activity classes and modifying factors. Results: CTES requires few inputs. The toxicological data, including OELs, OEBs, and vapor pressure are read from a database. Once the substance is selected, the user specifies its concentration and then chooses the task description and its duration. CTES has three outputs that may trigger follow-up: (1) inhalation risk score; (2) identification of the skin hazard with the skin warnings for local and systemic adverse effects; and (3) status for carcinogenic, mutagenic, or reprotoxic effects. Conclusion: The tool provides an effective way to rapidly screen low-concern tasks, and quickly identifies certain tasks involving substances that will need further review with, nevertheless, the appropriate conservatism. This tool shows that the higher-tier ART1.5 inhalation exposure assessment model can be included effectively in a screening tool. After 2 years of worldwide extensive use within the company, CTES is well perceived by the users, including the shop floor management, and it fulfills its target of screening tool.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.27-32
• /
• 2005

We determine the effective viscosity of suspensions with bidisperse particle size distribution by modifying an effective-medium theory that was proposed by Acrivos and Chang (1987) for monodisperse suspensions. The modified theory uses a simple model that captures some important effects of multi-particle hydrodynamic interactions. The modifications are described in detail in the present study. Estimations of effective viscosity by the modified theory are compared with the results of prior work for monodisperse and bidisperse suspensions. It is shown that the estimations agree very well with experimental or other calculated results up to approximately 0.45 of normalized particle volume fraction which is the ratio of volume faction to the maximum volume fraction of particles for bidisperse suspensions.

• 폴리머
• /
• 제25권5호
• /
• pp.609-616
• /
• 2001

본 연구에서는 copper phthalocyanine (CUPc)을 높은 합성 수율로서 성공적으로 합성시킴에 따라 용매를 사용하는 고분자의 합성 분야에 마이크로파 기술의 응용 가능성을 제시하고자 하였다. 가정용 전자레인지의 용기를 개조시키고 마이크로파 출력 조절기를 부착시키는 방법으로 본 실험에 사용되는 가변식 마이크로파 합성 장치를 자체 제작하였다. 화학 분석법, X선 회절장치(XRD), 주사형 전자현미경 (SEM) 및 입도 분석법 (PSA)을 이용하여 재래식 열 공정 및 마이크로파 공정을 사용하여 여러 조건하에서 합성된 시료들의 특성을 비교 분석하였다.